№ |
Authors Name/s, papers Title |
Part 1. Mechanical Engineering |
| Section 1.1. Machinery and Mechanism Design |
1_1_1 | G.A. Kushner Shaft Movement in Plane Bearing with Clearance |
1_1_3 | V.I. Charykov, A.A. Evdokimov, I.I. Kopytin Nomogram-Parametric Design for the Electromagnetic Separator with Permanent Magnets |
1_1_4 | A. Ermakova AFEM As the Variant of FEM for Analysis of N-Nonlinear Systems at Limit States |
1_1_5 | E.V. Balakina, A.I. Kislov, V.A. Malkov, D.V. Bruev Calculation of the Wheel Rolling Radius at Design Modeling of a Wheeled Vehicle |
1_1_6 | O. Krol High-Efficiency Worm Drive for Machine Rotary Table |
1_1_7 | B.A. Sharoglazov, V.V. Klementev Analysis of Operating Cycle Processes for Axial Internal Combustion Engine Working under Full Load |
1_1_9 | A.V. Muratov, V.V. Lyashenko Design Features of Switching Diesel Engines to the Gas-Diesel Operation Using Natural Gas as a Fuel |
1_1_10 | I.P. Nikitina, A.N. Polyakov Method of Simulation of the Thermal Deformation Behavior of Double-sided Face Grinding Machines |
1_1_12 | P.V. Boslovyak, V.V. Dvoretsky Optimal Design of Metal Structure of a Stand for Automated Resistance Welding |
1_1_13 | V.I. Tikhonovskiy, V.V. Gorbachev, A.V. Osipov Multifunctional Aerodynamic Plant for Experimental Static Studies of Turbomachine Annular Diffusers |
1_1_16 | A.A. Markina, E.Y. Kuznetsova, H. Ahmad Car Passive Safety Ensuring: FEA Analysis |
1_1_17 | A. Osipov, D. Egerev Investigation of the Loading of Fire Carriage Barrel Mounts |
1_1_19 | A.L. Balaban, P.A. Denisov, V.V. Grechikhin, Yu.V. Yufanova Application of Parallel Calculations and SIMD in Determining the Magnetization of Permanent Magnets |
1_1_20 | A.M. Busygin, A.A. Stelmakhov Mathematical Model for Determining Kinematic Parameters of a Bulldozer Ripper Mechanism |
1_1_21 | A.M. Busygin, A.A. Stelmakhov Strength Calculation of the Bulldozer Ripper Mechanism |
1_1_22 | A. Gushchin, V. Larshin, V. Marchuk CNC Machine Adaptive Control Mechatronic Module |
1_1_23 | Д.С. Писарев, И.А. Максимов, А.Н. Рогалев Разработка конструктивно-компоновочных схем для ТЭС с углекислотным теплоносителем |
1_1_24 | L.N. Shafigullin, N.V. Romanova, A.T. Gabdrakhmanov, G.R. Shafigullina, A.A. Treshchev Using Tire Reclaim for Production of Rubber Wheels of Waste Containers |
1_1_25 | V.A. Pronin, A.V. Kovanov, V.A. Tsvetkov, E.N. Mikhailova A Systematic Approach to Improve the Efficiency of a CO2 Booster Refrigerating Machine by Optimising the Performance of the Scroll Compressor |
1_1_28 | A.N. Gots, V.S. Klevtsov Non-Motor Stands for Accelerated Testing for Reliability of Piston Engine Cylinder Heads |
1_1_29 | M. Polyakova, D Konstantinov, A. Korchunov, M. Dabala The Use the Concept of Multiscale Simulation to Improve the Topology of TRIP-Steel Parts Operating under Extreme Loads |
1_1_31 | D.D. Korobko, S.A. Mikaeva Gradient Method Optimization of a Race Car Wing Airfoil at the Conceptual Design Phase |
1_1_32 | A.N. Gots, A.Yu. Abalyaev Calculations of Diesel Pistons with a Crack on the Edge of the Combustion Chamber |
1_1_34 | Yu.A. Lagunova, S.A. Khoroshavin, R.Sh. Nabiullin, A.E. Kalyanov Evaluation of Metal Structures of a Mining Excavator Boom by Non-Destructive Testing |
1_1_35 | A.Yu. Shabanov, Yu.V. Galyshev, A.A. Sidorov, A.B. Zaitsev Computational and Experimental Study of the Mechanisms of Influence of Multifunctional Additives to Diesel Fuel on the Combustion Process in the Cylinders of Internal Combustion Engines |
1_1_36 | V.F. Knelts, A.B. Matisen Design Principles and Specifics of Air Supply Systems Used in the Engines Produced by JSC Kolomensky Zavod |
1_1_37 | V.V. Miroshnikov, T.V. Petruchshenko, V.V. Dyadichev Multiunit Ferroprobe Converters as an Effective Method of the Nondestructing Magnetic Inspection |
1_1_38 | L.V. Radionova, E.V. Safonov, D.V. Gromov, S.R. Faizov Strength Analysis and Modeling of Direct Extrusion Tooling for Fusible Solder |
| Section 1.2. Dynamics of Machines and Working Processes |
1_2_3 | O. Benyukh, V. Kushnir, S. Ibragimova Peculiarities of Work of a Belt-Type Water-Lifting Unit at High Speed |
1_2_7 | A.N. Savoskin, A.P. Vasilev Influence of Various Types of the Bogie-Wheelsets Longitudinal Connections on the Dynamic Properties of the Vehicle |
1_2_8 | A. Startsev, S. Romanov, I. Storozhev Motion Stability of Tractor Transport Unit in Uncontrolled Rotation Mode |
1_2_9 | Yu.A. Izvekov, E.M. Gugina, V.V. Shemetova, E.A. Puzankova, V.V. Tochilkin Theory of Constraints in Machine Dynamics and Steelmaking Processes |
1_2_10 | K.V. Chernyshov, A.V. Pozdeev, V.V. Novikov, A.M. Kovalev, S.A. Shiryaev Methodology for Constructing Regulatory Boundaries for the Amplitude-Frequency Characteristics of Vehicles |
1_2_11 | E.T. Plaksina, A.B. Syritskii Internal Combustion Engine Diagnostics System Technical Implementation by Precision Chronometric Measurement Technology |
1_2_12 | S.D. Shepelev, А.М. Plaksin, I.P. Troyanovskaya, M.V. Pyataev, E.N. Kravchenko Theoretical and Experimental Studies of the Tractive Resistance of the Sowing Complex for the NO-TILL Technology |
1_2_13 | A.V. Christoforova, V.S. Popov, A.A. Popova Modeling Hydroelastic Oscillations for the End Wall of an Annular Channel |
1_2_15 | E.S. Evtukh, G.A. Neklyudova Distributing Contact Pressures and Stresses in the Rail Joint Zone during the Railroad Track Assembly |
1_2_16 | S.I. Polyakov, V.I. Akimov, A.V.Polukazakov Mathematical Model of the Dynamics of the Balancing Mechanism of the Weighing System of the Batcher |
1_2_18 | O.V. Anikeeva, A.G. Ivakhnenko, O.Yu. Erenkov, K.V. Podmasteryev Regularities of Hidden Management at Purpose Activities in the Field of Quality |
1_2_20 | L. Kondratenko, L. Mironova Method for Studying Oscillations of Mechanical Lines with Variable Elasticity |
1_2_21 | J. Kokunko, S. Krasnova Dynamic Smoothing of the Path of a Wheeled Robot with Automatic Fulfillment of Design Restrictions |
1_2_23 | Tint Naing Win, V.M. Alakin, S.A. Plakhov Development of a Methodology and Study of the Center of Gravity of a Vehicle |
1_2_25 | A.A. Abyzov, Y.O. Pronina, K.J. Muhiddinzoda Experimental Study of the Dynamic Characteristics of the Anti-Vibration Industrial Tractor Operators Seat |
1_2_27 | R.A. Peshkov, A.A. Shabley, D.R. Ismagilov Using Mathematical Modeling to Analyze the Strength Properties of Different Designs of Liquid Hydrogen Transportation Tank |
1_2_29 | I.V. Kudryavtsev, M.V. Brungardt, M.P. Khomutov, O.I. Rabetskaya, A.E. Mityaev Analytical Calculation of Beam Supports Stiffness to Provide the First Eigenfrequency and Critical Load |
1_2_30 | S. Buzikov, O. Buzikova Development of a Methodology for Bench Testing of Internal Combustion Engines |
1_2_31 | S. Ivannikov, I. Manaenkov, M. Krutyakova Assessing the Thermal State of Metal-Working Machinery |
1_2_33 | A.V. Gritsenko, V.D. Shepelev, A. Burzev, F.N. Grakov, K.I. Lukomsky Monitoring of the Exhaust System of the Internal Combustion Engine by the Rundown Parameters |
1_2_34 | I.E. Agureev, M.Yu. Elagin, R.N. Khmelev Simulation of the Combustion Engine Intake Pipeline Length Regulator Operation |
1_2_40 | A.E. Kaplyukhin, Zh.M. Blednova Alternative Soil-Sparing Drive |
1_2_42 | A.A. Chernousov, R.D. Enikeev Friction and Heat Transfer Models Derivation, Validation and Calibration on Experimental Data for Unsteady Air Flow in Pipe |
1_2_43 | S.S. Voronin, V.R. Gasiyarov, A.A. Radionov Developing and Adopting Dynamic Load Restriction Algorithm for Plate-Mill Stand |
| Section 1.3. Friction, Wear, and Lubrication in Machines |
1_3_1 | A.I. Izotov, A.A. Fominykh, V.N. Tymoshenko, S.А. Izotov, I.V. Gubin On the Question of the Method of Controlling the Tribological Situation in the Nodes of the Sliding Current Collector of Electric Machines |
1_3_2 | A. Bolotov, O. Novikova, V. Novikov Triboengineering Properties of Oxide Coatings with Anti-Friction Fillers |
1_3_3 | G.N. Kravchenko,Yu.I. Popov, A.I. Kolosov, A.V. Smolyaninov, I.V. Pocebneva Method of Design Calculation for Strength of Structures Made of Metal and Polymer Composite |
1_3_4 | S.V. Putintsev, S.P. Chirsky, S.S. Strelnikova Application and Comparison of Calorimetric and Dynamometer Methods to Experimental Evaluate Friction in a Piston Machine |
1_3_5 | A.V. Volchenkov, L.G. Nikitina The Problem of Choosing the Modes of Running-In Curved Parts |
1_3_6 | A.A. Asheichik, Mohammad Reza Bahrami Research of the Antifriction Properties of PTFE Composites |
1_3_8 | M.A. Mukutadze, Е.O. Lagunova Mathematical Model of Flow of Lubricant and Molten Coating with Micropolar Rheological Properties in Running Clearance of Journal Bearing with Non-Circular Bearing Surface Profile, Considering Pressure Dependence of Viscosity |
| Section 1.4. Design and Manufacturing Engineering of Industrial Facilities |
1_4_1 | S.V. Kuznetsova, A.L. Simakov Device and Technique of Automated Assembly Equipment Productivity Improvement |
1_4_2 | V.V. Lyashenko, A.V. Muratov Risk Management Model Related to Failure of Rolling Stock Repair and Maintenance in Service Locomotive Depots |
1_4_3 | A.S. Kalashnikov, Yu.А. Morgunov, N.В. Khomyakova Low-Waste Production of Conical and Hypoid Gears with Curved Teeth |
1_4_4 | N.V. Vulykh, A.N. Vulykh Numerical Modeling of Microprofile Strain under Orthogonal Impact under Constrained Load. Part 3 |
1_4_6 | D.S. Ershov, T.A. Levina, S.N. Yudaev An Approach to Modeling Metrology Laboratory Operation under Various Modes |
1_4_8 | R. Khusainov, I. Mubarakshin Rigidity Changes due to Thermal Processes Occurring during Operation of Vertical Milling Machine |
1_4_11 | A.I. Malyarov, D.S. Burtsev, K.A. Lukashik Impact of Inductor-Charge System Design on High-Frequency Induction Crucible Furnace Efficiency |
1_4_12 | M.V. Vartanov, Nguyen Van Dung, Nguyen Van Linh Mathematical Model of the Coupling Process of the "Shaft-Sleeve" Connection Using an Active Adaptation Tool for Three-Point Contact |
1_4_13 | E.B. Votinova, M.P. Shalimov, A.V. Berezovskiy The Usage of Quality Control Tools to Improve the Efficiency of Product Manufacture |
1_4_14 | O.M. Sakhbiev, F.S. Khayrullin One of the Implementations of the Method of Calculating Three-Dimensional Structures of Complex Shape |
1_4_16 | M.V. Krutyakova, O.V. Mordenko Development and Research of Countersinking and Grinding Operations in the Processing of Extra Thin-Walled Pipes Made of VN-2AE Alloy in Order to Ensure the Quality of Internal Surfaces |
1_4_17 | E.I. Egorova The Matrix of Technological Capabilities for the Formation of the Optimal Route-and-Operational Technology Structure |
1_4_18 | A.I. Popov, A.S. Fumin, V.I. Novikov, V.G. Teplukhin, A.P. Veselovsky Peculiarities of Contact Interaction of an Electrolytic Plasma with a Surface in Jet Machining of Materials of Turbine Blades |
1_4_19 | O.O. Podoliak, V.A. Ovchinnikova, A.V. Smirnov Organizational and Technological Aspects of the Resource Monitoring Module Creation for the Metalworking Tools |
1_4_23 | S. Larin, R. Bildanov Ontological Model of Process Formation for Technological Production Preparation |
1_4_24 | A.S. Karandaev, M.A. Zinchenko, A.Yu. Semitko, S.A. Evdokimov, O.I. Petukhova Technological Causes of Vertical Workpiece Asymmetry in Plate Rolling Mills |
1_4_25 | L.V. Radionova, R.A. Lisovskiy, A.S. Svistun, D.V. Gromov, I.N. Erdakov FEM Simulation Analysis of Wire Drawing Process at Different Angles Dies on Straight-Line Drawing Machines |
| Section 1.5. Transport and Technological Machines |
1_5_1 | A.O. Zhakov, I.P. Troyanovskaya, S.D. Shepelev Method for Calculating the Limiting Shear Force Deviating From a Given Direction of Movement Using the Example of the B12 Bulldozer |
1_5_2 | Yu.M. Lyashenko, E.Yu.Voronova, A.Yu. Lyashenko Methodical Basics for Calculation of Receiving and Segregation Hopper for Sand Rubble |
1_5_3 | K. Dauren, B. Maidan, N. Assylanbek Taper Spring Bar Applications in Slide Bearings |
1_5_4 | R.G. Safin, V.G. Sotnikov, D.F. Ziatdinova Installation for the Processing of Plant Waste into Activated Carbon |
1_5_5 | E.S. Kozin, D.M. Vokhmin Adaptive Camouflage for Special Purpose Vehicles |
1_5_6 | A.A. Gerasimova, M.V. Vasilyev, V.A. Nagovitsyn, C.I. Shaibel Upgrading the Gear Stand of Hot Rolling mill 2000 |
1_5_7 | Ya. Liberman, O. Lukashuk, A. Shabaeva Bucket and Rotor Design Parameter Selection According to Digging Uniformity Condition |
1_5_8 | V. Novoselov, A. Lukashuk A Mill Stand Reducing the Energy Input of the Periodic Pipe Rolling Process |
1_5_9 | T. Alushkin, A. Zubritskii, A. Ratkin Test Results of Flushing Fluid "Diesel Purge" |
1_5_11 | Ya. Liberman, O. Lukashuk Power Consumption Reduction of Bucket Wheel Excavator Drives and Its Productivity Increase |
1_5_12 | A.A. Sholomitskii, S.N. Tsarenko, S.G. Mogilny, Z.M. Aukazhieva, N.T. Kemerbaev Evaluation of Stress-Strain State of Vertical Steel Tanks Using Laser Scanning Data |
1_5_13 | S. Gaponenko, A. Kondratiev Numerical Simulation of Oscillatory Processes in Defect-Free and Defective Pipelines |
\
| Section 1.6. Mechanical Treatment of Materials |
1_6_1 | A.N. Shulgin, O.A. Chuprina, M.D. Ledovskyh, V.V. Pykhov Determination of Rational Cutting Conditions with Oblique Determination of Figures of Merit |
1_6_2 | T.L. Yevtushenko, A.Zh. Kassenov, Zh.K. Mussina, A.S. Yanyushkin, K.K. Abishev Peakless Rotary Cutter Design for Finish Turning |
1_6_3 | A. Serebrennikova, S. Timofeev An Experimental Study of Chip Shrinkage in Turning Wrought Aluminum Alloys |
1_6_4 | Акинцева А.В., Переверзев П.П. Модель расчета текущих глубин резания в разных сечениях вала эллипсного профиля при шлифовании заготовки с переменной податливостью по длине обрабатываемой поверхности |
1_6_5 | B.Ya. Mokriskij, A.V. Morozova Controlling the Parameters of the Cutting Technological System by the Dissipative Structures State |
1_6_10 | J.A. Yvon Nkeoua, О.А. Kursin, А.А. Zhdanov, М.Yu. Polyanchikova, А.А. Solovyev Studying the Process of Honing With Preliminary Cryogenic Treatment of Products from Low-Carbon Steels |
1_6_12 | D.A. Goloburdin, A.M. Kozlov, T.N. Ivanova, A.A. Kozlov Research of Abrasive Tool Manufacturing in Single and Small-Scale Production |
1_6_16 | P.I. Kalandarov, Z.M. Mukimov Humidity Control During Hydrothermal Treatment of Grain and Their Processed Products |
1_6_17 | K.O. Doroshenko, Yu.V. Maximov, V.B. Avdeev Processing of Complex Profile Parts by Waterjet Cutting |
1_6_18 | S.N. Grigoriev, M.A. Volosova, M.Sh. Migranov, N.A. Sukhova, S.R. Shekhtman Investigation of Thermal Phenomena during Cutting with a Multi-Coated Tool |
1_6_19 | L.V. Shipulin, N.D. Yusubov, A.A. Frolov Study of the Microrelief Obtained during Single Abrasive Grain Cutting |
1_6_20 | Акинцева А.В. Переверзев П.П. Модель расчета фактической радиальной подачи на протяжении всего процесса плоского шлифования с осевой подачей |
| Section 1.7. Industrial Hydraulic Systems |
1_7_1 | V. Sokolov Increasing Efficiency of Ventilation Systems with Vortex Regulation Devices |
1_7_2 | N.G. Sosnovsky, Nguyen Van Hoa Fan Rotating Speed Control with Volumetric Regulated Hydraulic Drive in a Hovercraft |
Part 2. Materials Engineering and Technologies for Production and Processing |
| Section 2.1. Polymers, Composites and Ceramics |
2_1_1 | A.A. Asheichik, M.R. Bahrami Research of the Radial Strength of a Composite Matrix of a Cable-Pusher for Oil Wells |
2_1_2 | V. Loganina, Al Saedi Bassam Shareef Deneef Structure Formation of Finishing Compositions Based on Modified Lump Silicate |
2_1_3 | O.V. Burlachenko, O.G. Chesnokova, T.F. Cherednichenko The Assessment of the Windproof Membranes Properties Influence on the Moisture Accumulation in the Building Envelope under Negative Temperatures Impact |
2_1_5 | A.V. Antsupov, A.A. Fedulov, V.P. Antsupov Studying Rheological Properties of Polytetrafluoroethylene |
2_1_6 | O.V. Snezhkina, I.G. Ovchinnikov Modeling of Crack Resistance of Reinforced Concrete Beams in the Zone of Action of Transverse Forces |
2_1_7 | D.D. Fazullin Biodegradable Composite Membranes for Wastewater Ultrafiltration |
2_1_8 | T.N. Lugovitskaya Development of Nanostructured Materials Based on Waste from Pulp and Paper Mills and the Principles of Nanoprecipitation |
2_1_9 | V.A. Beregovoi, A.M. Beregovoi, I.Yu. Lavrov Adaptation of New Materials Science Technologies for the Restoration of Stone Elements |
2_1_10 | O.A. Baev, Yu.M. Kosichenko, A.Yu. Garbuz Evaluation of Damageability and Water Permeability of Impervious Polymer Screens in the Presence of Defects |
2_1_11 | N.А. Olivenko, O.A. Kudryavtsev, A.V. Ignatova Simplified Approach to Verification of Numerical Models for Deformation and Fracture Analysis of Structural Composite Subjected to High-Velocity Impact |
2_1_12 | R.F. Khazhiakhmetova, S.G. Vlasova, K.G. Zemlenoy The Sound and Heat Insulation Materials Based on Glass Containers for Chemical Reagents |
2_1_13 | A.A. Dmitrievskiy, G.V. Grigoriev, V.V. Rodaev The Influence of Zirconia-Based Ceramic Composition on the Mechanical Properties of Its Volumetric and Near-Surface Layers |
2_1_14 | S.I. Dudkina, K.P. Andryushin, L.A. Reznichenko Intellectual Ceramics with Special Electrical Properties for Applications in Electronic Engineering |
2_1_16 | D. Volkov, E. Glazunova, I. Verbenko Structure, Dielectric and Magnetic Properties in Solid Solution Systems Based on BiMnO3 and BiFeO3 |
2_1_19 | В.В. Боброва, Н.Р. Прокопчук, С.А. Ефремов, С.В. Нечипуренко Химический состав и структура углерод-кремнистого композита |
2_1_21 | I.V. Ushakov, A.D. Oshorov, I.A. Dyakov Features of the Experimental Detection and Calculation of Microfracture Viscosity of Multilayer Composite |
2_1_22 | T.I. Shishelova, N.P. Konovalov, M.A. Khramovskikh Pre-Baikal Talc as an Advantageous Source Material for Composite Electro-Ceramic Products |
2_1_23 | B.M. Goltsman, N.S. Goltsman, V.M. Kurdashov Distribution of Liquid Foaming Agent Films on Glass Powder Particles in the Preparation of Foam Glass Batch |
2_1_26 | М.В. Корнюшин, А.В. Смирнов, С.В. Аюдинян Процесс холодного спекания высокоэнтропийной керамики (MnFeCoNiCu)3O4 |
2_1_27 | А.В. Касперович, В.В. Боброва, С.Н. Лежнев Модификация эластомерных композитов ионизирующим излучением |
2_1_28 | A.Yu. Omarov, D.A. Nechaev, L.K. Khalilova On the Possibility of Reducing Sintering Temperature and Maintaining the Level of Service Properties of Dense-Sintered Alumina Materials |
2_1_29 | D.M. Bragin, A.I. Popov, A.V. Eremin Effective Thermal Conductivity of Porous Material Based on TPMS |
2_1_31 | A.A. Chumakov, D.A. Golovko, A.V. Ryabova Synthesis of Aluminosilicate Proppants Based on Drilling Cuttings from the Vostochno-Chumakovskoye Field |
2_1_32 | A.M. Kuzmin, Sachin S. Raj, D.K. Chalganov Technological Modifier Effect on the Mechanical and Rheological Properties of Thermoplastic Composites with Barley Straw |
2_1_34 | E.A. Yatsenko, S.V. Trofimov, Yu.V. Novikov Study of the Possibility of Increasing the Strength of Cellular Geopolymer Materials by Introducing Zirconium Dioxide Additives |
2_1_35 | A.N. Blaznov, Z.G. Sakoshev, V.V. Firsov A Study into Hot-, Cold- and Warm-Cured Epoxy Binders |
2_1_36 | E.E. Mastalygina, Z.R. Abushakhmanova, A.Yu. Anpilova Functionalization of Microcrystalline Cellulose with Carboxylic Acids |
2_1_37 | M.I. Dvornik, N.M. Vlasova, A.A. Burkov Influence of Mechanical and Electrical Parameters on the Efficiency of Powder Production by Electro-Discharge Erosion of WC-Co and WC-TiC-Co Scrap |
2_1_39 | V.V. Rybin, A.A. Solovyev, A.D. Zuev Microhardness and Thermal Conductivity of Al/Nd2O3 Composite Made by Powder Metallurgy |
2_1_40 | D.G. Solomonov, M.Sh. Nikhamkin, A.V. Toropicina Use of Structurally Similar Samples to Fatigue Tests of Polymer Composite Structures |
2_1_42 | V.I. Kolesnikov, O.A. Belyak, T.V. Suvorova Stress-Strain State of Heterogeneous Fluid-Saturated Composites under Dynamic Impacts |
2_1_43 | M.N. Mullahmetov, D.S. Lobanov, A.S. Yankin Numerical Modeling of Mechanical Behavior of Composite Plates with Stress Concentration under Static Loading |
2_1_44 | Н.И. Чередниченко, П.А. Петров Определение зависимости параметров трехмерной печати от композиции фотополимерного материала |
2_1_47 | Д.В. Чащилов Исследование зависимости коэффициента теплопроводности костры льна от насыпной плотности |
2_1_48 | Мезенцев М.А., Мыктыбеков Б., Синицын А.В., Ежов А.Ю., Цветков И.В. Исследования и применение конструкционных керамических и композиционных материалов в авиационном двигателестроении |
| Section 2.2. Steels and Alloys, Metallurgical and Metalworking Technologies |
2_2_1 | Yu.V. Dolgachev, V.N. Pustovoit Conditions for the Implementation of the Twin Nucleation Mechanism as Applied to Martensite |
2_2_2 | G.I. Brover, E.E. Shcherbakova Physical Nature and Structural Organization of Steel Surface Layers under Thermal Deformation Effect of Pulsed Laser Radiation |
2_2_3 | O.A. Bytsenko, A.V. Ionov, K.M. Erikov Influence of High-Current Pulsed Laser on the CL20ES Steel Surface |
2_2_4 | Y.N. Loginov, Y.V. Zamaraeva Optimization of the Shell Shape for the Forging Upsetting of Magnesium |
2_2_5 | M.G. Potapov, P.A. Molochkov, D.A. Kuts New Composition Development of Wear-Resistant Cast Irons to Improve the Service Life of Special Purpose Castings |
2_2_6 | M.B. Savonkin, S.M. Kriskovich Investigation of Strain Forces during Electrically Welded Pipes Forming Based on Analytical Determination of Curved Boundaries of Workpiece/Tool Contact |
2_2_7 | E.V. Krasnova, Yu.A. Morgunov, B.P. Saushkin Impact of Hatch Parameters on Surface Micro-Geometry in Selective Electron Beam Melting |
2_2_8 | Yu.B. Egorova, L.V. Davydenko, A.V. Shmyrova Influence of Chemical Composition and Globular Structure Parameters on Mechanical Properties of VT6 Alloy Rolled Bars |
2_2_9 | V.N. Shinkin On Issue of Shaping Pipe Billet on Four-Roll Mills |
2_2_10 | S.M. Belskiy, A.N. Shkarin Comparing Cross-Section Profiles of Hot-Rolled and Cold-Rolled Strips |
2_2_11 | D. Pavlov Investigation of the Effect of Pipe Temperature on the Wall Thickness Variation in the Pipes during Plug Rolling on a Stub Mandrel |
2_2_13 | V.P. Romanenko, S.M. Kriskovich, M.B. Savonkin Advanced Methods of Hollow Railway Car Axles Production |
2_2_17 | I.N. Egorov, N.Ya. Egorov, S.I. Egorova The Influence of the Particle Size on Rheological Properties of Magneto Fluidized Bed of Strontium Hexaferrite |
2_2_18 | S.S. Silchonok-Zadykyan, O.G. Zotov, G.G. Zadykyan Investigation of Recrystallization Processes of Steel 06Cr15Ni4CuMo Obtained by Direct Laser Deposition (DLD) |
2_2_19 | A.S. Budnikov, B.A. Romancev, I.S. Demetrashvili Investigation of Short-Radius Elbows Drawing Using Computer Simulation |
2_2_20 | M.A. Sheksheev, S.V. Mikhailitsyn, E.N. Shiriaeva Investigation of the Effect of Ultrafine Particles of Titanium Monocarbide on the Structure of the Deposited Metal of Low-Carbon Steel |
2_2_21 | С.Н. Лежнев, А.Б. Найзабеков, И.Е. Волокитина, Е.А. Панин Влияние ковки в бойках новой конструкции, реализующих знакопеременные деформации, на структуру и механические свойства стали 5ХВ2С |
2_2_23 | G.I. Brover, E.E. Shcherbakova Texture Effects as a Factor in Improving the Performance of a Metalworking Tool after Laser Irradiation |
2_2_24 | A.V. Shaparev, I.A. Savin, S.N. Ptichkin Punches and Matrices Recovery for Hot Punching by Electric Arc Hardfacing |
2_2_25 | D.L. Pankratov, A.V. Shaparev, D.D. Pankratov Use of Hot Stamping to Restore Trucks Tie Rod Ball Pins Efficiency |
2_2_26 | O.V. Slautin, D. V. Pronichev, S.A. Kuznetsov Study of the Influence of Electrophysical Impacts during Thermal Treatment on the Kinetic of Diffusion in a Bimetal of the Ti – Cu System |
2_2_27 | Yu. Loginov, G. Shimov, N. Bushueva Processing of Non-Dimensional Pipe Shorts without Remelting |
2_2_30 | A.V. Berezovskiy, M.P. Shalimov, E.B. Votinova Arc Welding Technology of Dissimilar Steels ASTM A128 and J03502 Grade 1 |
2_2_31 | A.V. Sulitsin, S.V. Brusnitcyn, I.A. Gruzdeva Continuous Casting of Cast Rod Made of Cu-Mg Alloys to Contact Wire Produce |
2_2_32 | D.N. Gurulev, L.V. Palatkina, Y.V. Levin Investigation of Stresses and Deformation Forces in Energy-Intensive Pressing Processes with Backflow of Metal |
2_2_33 | D.L. Pankratov, A.M. Valiev, D.D. Pankratov Research of the Effect of Cooling Modes of Forgings Made of 38MnVS6 Steel on Microstructure and Mechanical Properties |
2_2_34 | B.P. Yur´ev, V.A. Dudko Study of Hematite Dissociation Process at Iron-Ore Pellet Heating |
2_2_37 | V.S. Muratov, M.S. Kazakov Influence of Friction Stir Welding Modes on the Structure of the Weld Seam of Aluminum Alloy of the Al-Mg-ScSystem |
2_2_39 | B.P.Yur´ev, V.A. Dudko Study of Oxidation Process at Iron-Ore Pellet Heat Treatment |
2_2_40 | P. Poletskov, D. Alekseev, A. Kuznetsova Investigation of Technological Regimes for the Production of Rolled Steel with Special Properties |
2_2_41 | D. Alekseev, D. Emaleeva, A. Gulin Selection of an Accelerated Cooling Scheme for Low-Alloy Steel Coils Based on Finite Element Modeling |
2_2_42 | V.A. Bigeev, M.V. Potapova, I.M. Potapov Research of Processing of Suroyamsky Titanomagnetite Ores |
2_2_43 | V.A. Bigeev, M.V. Potapova, I.M. Potapov Determination of Hydrogen Consumption for Solid-Phase Selective Reduction of Complex Iron-Ore Raw in Laboratory Studies |
2_2_44 | Yu. Kapelyushin, А.V. Senin, A.G. Ryazanov Recovery of Iron from Electric Arc Furnace Dust by Carbothermal Reduction |
2_2_45 | S.A. Tipalin, V.B. Belousov, D.A. Gnevashev Change in Properties of 30KhGSA Steel Sheets with Various Thicknesses |
2_2_46 | A.S. Kharchenko, V.I. Sysoev, M.I. Sibagatullina Increasing the Quality of Sinter by Introducing the Sulfur Removal Unit Waste to the Charge to Reduce the Carbon Footprint by Increasing the Natural Gas Consumption during Cast Iron Smelting in a Blast Furnace |
2_2_47 | М.А. Петров, П.Н. Уржумов Компьютерное Моделирование Процесса Горячей Объёмной Штамповки Поковки «Заглушка» и Топологическая Оптимизация Штампа |
2_2_49 | N.N. Safronov, L.R. Kharisov, M.R. Fazliyev The Search for the Dependence of the AL-TI-B Addition Alloy Structure on the Composition of the Charge of the Electroslag Process |
2_2_50 | A.S. Savinov, S.M. Andreev, I.V. Mikhalkina Identifying Thermal Stresses in a Steel Cylindrical Rod |
2_2_51 | A.V. Obukhova, N.N. Klochkova, A.N. Protsenko Investigation of a Screw Inductor Design for Quenching Balls |
2_2_52 | R. Gavariev, K. Gavarieva, Z. Fairuzova Investigation of the Temperature Field of the Casting-Mold System during Casting into Metal Molds |
2_2_54 | I.S. Belashova, T.V. Tarasova, A.V. Rusakova Investigation of the Processes of Laser Shock Hardening of Metal Materials |
2_2_55 | D. Pavlov, M. Erpalov The Study of Rheological Properties of Steel 09G2S Using Reverse Modeling to Estimate the Accuracy the Results Obtained |
2_2_56 | А.В. Владимиров, Г.А. Орлов Исследование влияния коэффициента трения на усилия, действующие на короткую оправку, при продольной прокатке |
2_2_57 | G.K. Akizhanova, S.P. Kharchenko, A.V. Bogomolov Improving the Energy Efficiency of Heating Pipe Billets in a Rotary Hearth Furnace |
2_2_58 | I.A. Durnova, O.V. Aleksashina, T.A. Lartseva Determination of Standard Sample Composition When Developing Standard Samples of Establishment |
2_2_59 | E.A. Morozova, V.S. Muratov, N.S. Yakimov Investigation of the Carburizing Process of Chromium Structural Steels |
2_2_60 | S.A. Barannikova, P.V. Iskhakova Temperature Effect on Deformation Response in Austenitic Stainless Steel |
2_2_62 | D. Zhao, N. Vdonin, I. Ilin Role of Welding Current on Microstructural Properties and Welding Characteristics of Spot-Welded Joints for the Dual-Phase Steel |
2_2_65 | L.V. Radionova, E.V. Safonov, S.R. Faizov, V.A. Bykov Causes and solutions of bubbles appearing on the surface of direct extrusion solder rod |
2_2_66 | Ю.Н. Логинов, Г.В. Шимов, Н.И. Бушуева Переработка немерных отрезков труб без применения переплава |
| Section 2.3. Chemical and Hydrometallurgical Technologies |
2_3_1 | E.B. Godunov, I.V. Artamonova, I.G. Gorichev Study of Acidic and Basic Properties of Manganese Oxides in Sulfuric Acid Solutions |
2_3_3 | A.V. Vyboishchik, M.Yu. Popov Contemporary Methods of Production of Titania-Containing Pigments from Titanium Tetrachloride |
2_3_4 | J.A. Bessonova, O.V. Ershova, M.A. Ziablitseva Results of Quantum Chemical Evaluation of Interaction between Collecting Agents and Coal Surface |
2_3_5 | L.V. Sokolov, V.G. Lobanov, O.B. Kolmachikhina Methodological Specificities for Researching Electrophysical Activation of Zinc Cake Leaching |
2_3_6 | E.B. Kolmachikhina, K.D. Naumov, D.I. Bludova Selective Copper Extraction from Spent Lithium-Ion Batteries |
2_3_7 | О.И. Нохрина, И.Д. Рожихина, М.А. Голодова Получение высококачественных концентратов методом гидрометаллургического обогащения марганцевых руд |
2_3_8 | O.Yu. Makovskaya, I.A. Petkin Investigation of Ultrasound Assist Co(II) and Ni(II) Sorption by Lewatit TP 220 Ion Exchange Resin |
2_3_9 | O.Yu. Makovskaya, S.E. Polygalov, E.D. Maklashova Sorption Concentration of Palladium from Nitric Acid Solutions on Anionites |
| Section 2.4. Surface Engineering and Coatings |
2_4_1 | V.R. Baraz, E.A. Ishina The Influence of Friction Treatment on Peculiarities Microstructure and Properties of Spring Materials |
2_4_2 | E.E. Dzhafarov, O.A. Bytsenko, A.V. Ionov Surface Properties´ Changing Samples from Cobalt-Chromium Powders at Electron-Beam Processing |
2_4_3 | D.S. Solovjev Improving the Electroplating Coating Uniformity Based on Fuzzy Control of the Setting Value Using the Combined Defuzzification Method with the Presence of Stochastic Influences |
2_4_4 | V. Loganina, M. Zaytseva, Al Saedi Bassam Shareef Deneef Structure Formation of a Lime Stone in the Presence of a Polysilicate Solution |
2_4_5 | A.E. Balanovskiy, Van Trieu Nguyen, Van Vinh Nguyen Studying of the Structures and Phase Composition of Alloyed Layers of the Fe-Cr-C-Cu-Sn System during Plasma Melting of a Mixture of Tin Bronze and Chromium Carbide |
2_4_7 | I.F. Uvarova Diffusion-Deformation Instability with Ordered Structure Generation on the Surface of Semiconductors and Metals under Laser Radiation |
2_4_8 | N. Vodolazskaya,O. Sharaya Features of Surface Structure Formation of Steel Pieces in the Process of Heat Hardening |
2_4_9 | И.В. Шкалей, Т.И. Муравьева, О.О. Щербакова, А.М. Мезрин Изучение трансформации поверхности образцов с DLC покрытиями в процессе трения |
2_4_10 | A.N. Zaytzev, A.N. Lukianova, D.A. Demoretsky Assessment of Shear Bond Strength of Thermal Spray Coatings by Applying Prismatic Samples |
2_4_11 | Van Trieu Nguyen, A.E. Balanovskiy, Van Vinh Nguyen Surface Alloying of Low-Carbon Steel with Chromium Carbide during Plasma Reflow |
2_4_13 | S.V. Vodopyanova, R.S. Sayfullin Formation Features of Nickel-Matrix Electrochemical Composite Coatings with the Dispersion Phase of Metal Sulfides |
2_4_14 | A.V. Gritsenko, A.V. Starunov, V.D. Shepelev Plasma Surface Hardening in Parts Recovering Process |
2_4_15 | A.N. Zayatzev, JI Shoucheng Finite Element Analysis of the Tensile Adhesion Testing of Thermally Sprayed Coating on a Cylindrical Sample |
2_4_17 | M.I. Silensky, R.A. Latypov, A.P. Razin Renovation of Combs of HPT Blades with a Concentrated Energy Flow |
| Section 2.5. Processing and Controlling Technologies |
2_5_1 | A.А. Baron, L.V. Palatkina, S.V. Palatkin On Using Computer Simulation to Study Casting and Solidification Processes of Standard Cast Iron Sample |
2_5_2 | N.I.Volgina, A.V.Shulgin, S.S.Khlamkova Residual Stresses and Stress Corrosion Resistance of Pipeline Metal |
2_5_3 | R.G. Vildanov, A.S. Khismatullin, A.S. Kuznetsov Shell Structures Stress-Strain State Monitoring System |
2_5_4 | О.О. Щербакова, Т.И. Муравьева, И.В. Шкалей Эволюция структуры и свойств рельсовых сталей в процессе эксплуатации |
2_5_5 | K.A. Lukashyk, D.S. Burtsev, A.A. Ponomarev Dependence of Acoustic Properties of Bell-Shaped Casting on its Cooling Rate Conditions |
2_5_6 | E.V. Tarasyuk, L.G. Kolyada, A.P. Ponomarev The Research of Corrosion Inhibitors Content in Packaging Materials |
2_5_7 | A.I. Popov, D.M. Bragin, A.V. Eremin Effective Thermal Conductivity of Structured Porous Medium: Numerical Study |
2_5_8 | M.G. Vakhitov, V.V. Razevig, E.V. Leshkov Detection of Defects in Composite Elements Using a Microwave Scanning Method |
2_5_11 | A.M. Pesin, D.O. Pustovoytov, K.G. Pivovarova Thermal Analysis of Al-Cu-Mg Aluminum Alloys |
2_5_12 | M. Mustafaev, D. Mustafaeva, G. Mustafaev Material Science and Technological Aspects of the Synthesis of Initial Copper and Silver Chalcogenides and Thin Films with Reproducible Properties Based on Them for Film Thermoelectric Energy Converters |
2_5_13 | O.V. Boldyreva, V.A. Komarov Method of Digital Image Processing in Determining Cracks in Reinforced Concrete Beams |
2_5_16 | R.O. Sirotkin, O.S. Sirotkin The Location of Homo- and Heteronuclear Chemical Bonds and Compounds of Elements (Substances) within the "Chemical Triangle" |
2_5_17 | M.V. Nadezhkin, S.A. Barannikova Study of the Kinetics of Plastic Flow in Titanium Alloys |
2_5_18 | A. Stolbovsky, S. Murzinova, N. Chikunova Study of Chemical Etching Surface of Ultrafine-Grained Copper Obtained by High-Pressure Torsion with Using Scanning Tunneling Microscopy |
2_5_19 | A. Stolbovsky, S. Murzinova, N. Chikunova Quantification of the Ultrafine-Grained Structure of Copper Subjected to High-Pressure Torsion Based on Processing of Scanning Tunneling Microscopy Images of the Chemical Etching Surface |
2_5_20 | L.B. Zuev, S.A. Barannikova, S.V. Kolosov Macroscale Plasticity Parameter of Metals and Alloys |
2_5_22 | R.O. Sirotkin, A.M. Pavlova, O.S. Sirotkin Dependence of Hardness of Substances and Materials on Metallic Character of Chemical Bond of Elements |
2_5_23 | E.B. Votinova, Al-Saiymari Nardeen Experimental and Numerical Study of Fatigue Failure for Carburized Carbon Steel |
2_5_25 | A.V. Smolyaninov, V.A. Tereshonkov, V.I. Bekhmetiev Effect of Impact Load on the Structure of Polymer Composite Materials |
2_5_30 | E. Zenkov Testing Elastomer Specimens to Calculate their Hyperelasticity Properties |
2_5_31 | A. Suslov, E. Yaroslavkina Acoustic Methods for Measuring the Thickness of Deposits on the Inner Wall of Pipelines |
2_5_32 | L.V. Radionova, A.E. Sarafanov, L.A. Glebov, I. N. Erdakov Analysis of Deformation Behavior for Titanium Alloys at Elevated Temperature |