English
icie.rus@gmail.com
ПРОГРАММА МЕЖДУНАРОДНОЙ НАУЧНО-ТЕХНИЧЕСКОЙ КОНФЕРЕНЦИИ
"Пром-Инжиниринг' 2018"
| № | Фамилии авторов, название доклада | Раздел 1. Машиностроение |
| Секция 1.1. Динамика машин и рабочих процессов | |
| 1 | A. Malozemov, V. Bondar, G. Malozemov Diesel Engine Pre-heating and Starting Simulation with Modelica Language |
| 2 | L.V. Plotnikov, Yu.M. Brodov Processes Dynamic Characteristics in the Intake System of Piston Internal Combustion Engine |
| 3 | D.A. Permyakov, A.S. Pantileev, S.V. Makhnovich Calculated and Experimental Study of Free Vibrations of a Cylindrical Shell |
| 4 | Соколов В.И. Передаточные функции для касательного напряжения при нестационарном жидкостном трении |
| 6 | E.A. Lazarev,V.E. Lazarev, M.A. Matsulevich Optimization of Parameters for Fuel Combustion Process at Diesel Working Cycle Improvement |
| 7 | V.V. Kirillov, R.D. Shelkhovskoi Mathematical Models of Low-Temperature Gas Generator |
| 8 | A. Ermakova Iterative Process of AFEM and Ideal Failure Models of Structures |
| 9 | L.V. Plotnikov, S. Bernasconi, B.P. Zhilkin Analysis of Resonator Installation Effect in Intake System of the Diesel Engine on Parameters of Gas Exchange Quality |
| 10 | M.V. Shakhmatov, E.A. Usmanova, L.I. Khmarova Calculated-experimental Estimation of Residual Pipeline Resource for Long-Term Operation |
| 11 | D.A. Shlyakhina,O.V. Ratmanova Dynamic Problem of Direct Piezoelectric Effect for the Circular Multilayer Plate |
| 12 | A.A. Gubanova Dynamic Diagnostics of Limiting State of Milling Process Based on Poincare Stroboscopic Mapping |
| 13 | B.A. Sharoglazov, K.D. Podsedov, M.K. Kuanyshev Calculation-Analytical Estimation of the Working Cycle Parameters of the Crankless and Crank Engines Under Similar Loading Conditions |
| 14 | G.V. Lomakin,V.Е. Lazarev, V.M. Myslyaev Experimental Estimation of Influence of Fuel injector Nozzle Design on Output Parameters of Tractor Diesel |
| 15 | A.N. Savoskin, A.P. Vasilev Dislocation Model of Wheel-rail Interaction with Locomotive Lateral Fluctuations |
| 16 | A.D. Bardovsky, A.A. Gerasimova, I.I. Basyrov Study of Oscillating Process of Harp Screens |
| 18 | E.E. Richter, A.V. Ignatova, A.V. Ponkin To Issue of Application of Method of Dynamic Mechanical Analysis (DMA) to Determine Viscoelastic Properties and Heat Generation in Rubber Elements of Solid Tires |
| 19 | N.N. Barbashov, I.V. Leonov, K.D. Sologub Modeling of Dynamic and Economical Characteristics of Life-Saving Device with Flywheel Energy Storage |
| 20 | A.I. Artyunin, S.V. Eliseev, O.Y. Sumenkov Experimental Studies on Influence of Natural Frequencies of Oscillations of Mechanical system on Angular Velocity of Pendulum on Rotating Shaft |
| 24 | L. Abdullina, N. Barbashov, I. Leonov Analysis of Possibilities to Reduce Energy Consumption of Elevator Systems |
| 25 | I.A. Teterina,P.A. Korchagin, A.B. Letopolsky Results of Investigating Vibration Load at Human Operator’s Seat in Utility Machine |
| 26 | V.S. Zhernakov, V.P. Pavlov, V. M. Kudoyarova Deformation of Thin Elastic Rod Under Large Deflections |
| 27 | K.E. Rozhkov,I.A. Krivosheev, N.B. Simonov Selection of Incidence Angle at Designing Blade Row of Compressors and Turbines |
| 28 | N.K. Kuznetsov, I.A. Iov, A.A. Iov Synthesis of Controlling the Movement of Digging Mechanisms of Excavators on the Basis of Inverse Dynamics Problems |
| 30 | K.Yu. Kravchenko, S.S. Kugaevskii, M.P. Zhuravlev Damping Ratio and Natural Frequency of Dynamic System in Milling |
| 31 | A.N. Gots Models of Fatigue Fracture under Cyclic Loading Pistons of Internal Combustion Engines |
| 32 | V.Yu. Ovsyannikov, A.I. Klychnikov, A.V. Sharov Investigation of Units Condition of Rotor Type Milling Machines Based on Vibration Analysis |
| 33 | V.L. Zakovorotny, V.E. Gvindjiliya Mathematical Modeling of Wear of Cutter on Back Edge by Taking into Account Beating and Kinematic Perturbations |
| 35 | Петрова И.М., Гадолина И.В. Создание обобщенного спектра нагружения при различных вариантах нагружения в эксплуатации |
| 36 | A.N. Davydov, A.V. Smolyaninov Determination of Critical Speed of Rail Vehicle as Mechanical System with Nonlinear Constraints |
| 38 | S.V. Seregin Influence of Contact Area of Additional Elements on Frequency Spectrum Splitting in Cylindrical Shells |
| 39 | D.R. Mugla, A.L. Galinovskiy, N.V. Kobernik Selection of Rational Technological Modes and Parameters of Underwater Waterjet Cutting |
| 40 | E.I. Shchurova Voxel and Finite Element Modeling of the Ceramic Grains-Polymer Composite Panel for Ballistic Impact Description |
| 42 | A.A. Kondratyuk, V.K. Shilko, A.A. Klopotov Type Problems and Prospects of Crankshaft (Eccentric) Machinery Usage in Sawmilling |
| 43 | V.S. Bykador Drill Bit Self-Oscillation in Cutting |
| 44 | S.S. Kugaevskii , V.N. Ashikhmin Using Local Coordinate Systems for Dimensional Analysis in the Machining |
| 46 | I.O. Lysov, S.S. Nikiforov, E.B. Ryzhuk Research of Nature of Interaction of Fuel Spray with Wall of Combustion Chamber of Overload Diesel Engine on Unique “Injection” Research Installation |
| 49 | S.S. Makarov, V.B. Dementiev Numerical Simulation of Conjugate Heat Transfer in Non-Regular Mode of Cooling High-Temperature Metal Cylinder by Gas-Liquid Medium in Circular Channel |
| 50 | S.V. Rakulenko, V.I. Grishchenko, M.S. Poleshkin Amplitude-Frequency Method of Control of a Mobile Drilling Machine Hydraulic Drive with Dependent Tool Advance |
| 51 | V. Chernyshev, O. Fominova Control of Damping Process in System of Vibration Isolation |
| 53 | S. Majorov, L. Savin, A. Babin Estimation of Energy-Efficiency of Oscillations of Rotors on Radial Fluid-Film Bearings |
| 54 | A.I. Ozerskij, N.A. Tseligorov Method of Investigating Dynamic Operating Modes of Electro-Hydraulic Drive Systems with Movable Boundaries of Working Fluids |
| 56 | S.V. Sergeev, Yu.S. Sergeev, A.V. Kononistov Self-Synchronized Controlled Vibration Drive with Automated Oscillation Parameters Monitoring System for High-Tech Equipment |
| 57 | A.S. Khoruzhiy,P.A. Taranenko Analysis of Effect of Internal Pressure on Natural Frequencies of Bending Vibrations of Straight Pipe with Fluid |
| 58 | V.V. Novikov, D.A. Chumakov, I.A. Golyatkin Experimental Modular Unit for Testing Nodes of Air Suspension with Combined Amortization |
| 59 | A.V. Vasilyev, Y.S. Bakhracheva Calculation of Kinematic Characteristics of Internal Combustion Engine Valve Gear |
| 60 | A.V. Otrokov, G.S. Khazanovich, N.B. Afonina Impact of Design Parameters on Efficiency of Loading Organs with Gathering-Stars of the Roadheaders |
| 63 | V.A. Romanov, V.P. Beskachko Virtual Prototyping Experience of the Coriolis Flowmeter |
| 64 | K.V. Chernyshov, I.M. Ryabov, A.V. Pozdeev Theoretical Foundations of Optimal Two-Step Control of Suspension Stiffness of Transport Vehicle in Oscillation Cycle |
| 65 | K.V. Chernyshov, I.M. Ryabov, A.V. Pozdeev Potential Vibration Isolation Qualities of Suspensions with Two-Step Stiffness Control in Oscillation Cycle |
| 66 | A.A. Abyzov, I.I. Berezin Fatigue Life Prediction of Track Link of a High-Speed Vehicle |
| 69 | V.S. Popov, L.I. Mogilevich, E.D. Grushenkova Hydroelastic Response of Three-layered Plate Interacting with Pulsating Viscous Liquid Layer |
| 70 | M.D. Garipov, D.R. Rezvanov, R.F. Zinnatullin Experimental Study of Spark-Ignited 2-Stroke Heavy Fuel Engine |
| 71 | M.Sh. Nikhamkin, S.V. Semenov, D.G. Solomonov Application of Experimental Modal Analysis for Identification of Laminated Carbon Fiber Reinforced Plastics Model Parameters |
| 72 | Гусаров В.В., Ашишин А.А., Аутхман Р.Л. Анализ возможностей снижения виброактивности одноцилиндрового двухтактного двигателя |
| 73 | V.A. Kryukov, A.V. Plyasov Reducing Level of Vibration in Two-Stream Spur Gear |
| 74 | V. Surikov, Yu. Lisin, A. Valeev Analysis of Application of Pre-Screwed Auger Wheels for Operative Increasing of Throughput Capacity of Oil Pipelines |
| 76 | V.G. Gusev, A.A. Fomin, V.A. Saldaev Mathematical Model of Cut Layer at Intensive Profile Milling of Workpieces |
| 77 | A.A. Fomin, V.G. Gusev, A.R. Sadrtdinov Assurance of Accuracy of Longitudinal Section of Profile Surfaces Milled at High Feeds |
| 78 | S.D. Smetanin, V.G. Shalamov Dynamics of Rotary Milling According to Group Scheme of Obtaining Discontinuous Chips |
| 80 | R.R. Kalimullin, T.A. Volkova, A.R. Valeev Modeling Hydrodynamic Processes in the Vortex Generator |
| 81 | A. Bakhtegareeva, O. Mironova, E. Bakhtegareeva Substantiation of Necessity to Modernize Gas Pipelines Gas Cooling System |
| 82 | A. Yatsun, S. Jatsun Modeling Quasi-static Gait of a Person Wearing Lower-Limb Exoskeleton |
| 83 | A. Koloskova, I. Kiselev, S. Voronov Modeling of Thin-Walled Cylindrical Part Turning Process Dynamics |
| 84 | I. Ivanov, I. Pleshcheev, A. Larkin Investigation of Controlled Vibratory Drilling Dynamics with Variable Velocity Feedback Gain |
| 85 | A.S. Gishvarov, M.N. Davydov Justification of Program for Accelerated Tests of Aircraft Auxiliary Gas Turbine Engine |
| 87 | Nail Farilovich Timerbaev, Omar Abdulhadi Mustafa Almohammed, Asaad Kamil Ali Longitudinal Fin Effect on Effectiveness of Double Pipe Heat Exchanger |
| 88 | D.L. Karelin, A.V. Boldyrev, A.M. Belousov Modeling and Dynamic Analysis of Adjustable Axial Flow Divider |
| 90 | A.Yu. Botashev, A.A. Musaev, R.A. Bayramukov Study of Combustion Stroke of Double-Chamber Explosive Gas Forming Device |
| 91 | V. Lapshin Influence of Elastic-Plastic Transformation of Mechanorheological Model on Impact Duration |
| 92 | E. Bazhenov, S. Buynachev, D. Chernyshev Mathematical Modeling of Oscillations of the Associated Transport and Technological Complex with the Use of the Graph Theory |
| 93 | E.V. Zenkov,V.I. Sobolev Modeling of Seismic Processes in Buildings at Presence of Elastoplastic Seismic Insulators |
| 94 | A.S. Gishvarov, M.N. Davidov, A.V. Zyrianov Planning an Experiment in Assessing Altitude-Velocity Characteristics of Aviation Gas Turbine Engine |
| 95 | A. Gavrilov, E. Poyarkova, N. Morozov Damping Accounting in Calculating Problem of Thin-Walled Rod of Closed Profile |
| 96 | V.A. Kuts, S.M. Nikolaev, I.A. Kiselev Application of Combined Technique for Chatter Prediction in 5-Axis Milling |
| 97 | A.A. Ershov, A.A. Ershova On Bending of Rod under Strong Longitudinal Compression |
| 98 | P.A. Taranenko, D.V. Telegin, V.A. Romanov Analysis of Forced Bending Vibrations of Straight Pipe with Flowing Fluid |
| 99 | I.R. Tazeev, S.O. Gaponenko, A.E. Kondratiev Assessment of Natural Oscillation Frequencies of Rotor for Development of Hard-Bearing Balancing Machine |
| 100 | A.L. Kartashev, M.A. Kartasheva Simulation of Flows in Bottom Field of an External Expansion Annular Nozzles |
| 101 | E.A. Kartasheva On the Economic Viability of Reusable Space–Rocket Systems Use to Deliver Payloads to Satellite Orbit |
| 102 | I.V. Dobrov Mechanics of Uniform Motion of a Rigid Body |
| 374 | V.G. Shram, A.V. Lysyannikov, N.N. Lysyannikovа Development of Device for Evaluating Performance of Rolling Bearings |
| Секция 1.2. Трение, смазка, износ машин (УРАЛТРИБО-2016) | |
| 1 | A.O. Gorlenko, S.P. Shetz Investigation of Kinetics of Wear in Friction Pair of Type “Undercuff Neck - Cuff Edge” |
| 2 | E.V. Balakina, D.S. Sarbaev Qualitative Research of Combined Friction in Contact of Elastic Wheel with Solid Surface |
| 3 | М.V. Zernin, A.G. Yashutin Modeling of Various Types of Surface Wear |
| 4 | Ашейчик А.А. Ресурсные испытания радиальных кольцевых уплотнений при высоких температурах |
| 5 | A.N. Bolotov, V.V. Novikov, O.O. Novikova Magnetic Nanodisperse Oils Based on Organosilicone Fluids: Lubricant Properties of Oils with Different Additives |
| 6 | A.M. Antimonov, N.B. Pushkareva, E.G. Reshetnikov Four-Ball Machine Friction Unit Geometrical Parameters |
| 7 | A.M. Antimonov, N.B. Pushkareva, E.G. Reshetnikov Cylindrical Shell Edges Bending Process Technological Features |
| 8 | A.N. Bolotov, V.V. Novikov, O.O. Novikova Magnetic Nanodispersed Lubricating Oils Based on Organosilicon Fluids: Basics of the Technology |
| 9 | E. Safronov, A. Nosko Measurement Technique for Temperature of Friction Lining of Brake Roller for Pallet Flow Rack |
| 10 | V.A. Markov, V.A. Sokolova, V.I. Kretinin Assessing the Impact Strength of Blade Edges of Forestry Machinery Operating Components |
| 11 | А.М. Ulanov, S.А. Bezborodov Wearing of MR Wire Vibration Insulation Material under Random Load |
| 12 | V.P. Lapshin, T.S. Babenko, D.V. Moiseev Experimental Evaluation of Influence of Tool Wear on Quality of Turning |
| 14 | A.V. Gritsenko, V.D. Shepelev,O.R. Issenova Development of Measures to Prevent Surging Turbochargers of Cars |
| 15 | B.I. Kowalsky, V.G. Shram, A.V. Lysyannikov Semigraphical Method of Motor Oils Thermal-Oxidative Stability Index Control |
| 16 | A.N. Sokolnikov, O.N. Petrov, V.I. Vereshchagin Comparison Method of Engine Oils on Thermooxidizing Stability Indicators |
| 17 | O.N. Petrov, A.N. Sokolnikov, D.V. Agrovichenko Electrometric Control Method for Processes Proceeding at Boundary Sliding Friction |
| 18 | Е.O. Lagunova, M.A. Mukutadze Radial Friction Bearings Conditioned by Melt |
| 20 | Ашейчик А.А. Смазка для вакуумных узлов трения на ос-нове легкоплавких металлов |
| 22 | A.S. Khusainov, A.A. Glushchenko, F.F. Zartdinova Application of Bio Oil in Hydraulic Systems |
| 23 | A.S. Khusainov, A.A. Glushchenko On Support of Optimization Criterion of Recovery Process of Motor Oils |
| 24 | R.R. Dema, R.N. Amirov, O.B. Kalugina Determining Parameters Effecting Work of Lubricants Supplying System at Wide-Strip Hot Rolling |
| 25 | E. Zadorozhnaya, I. Levanov, M. Kandeva Tribological Research of Biodegradable Lubricants for Friction Units of Machines and Mechanisms. Current State of Research |
| 26 | P. Ogar, A. Kozhevnikov, V. Elsukov Contact of Rigid Rough Surface Through Polymer Coating Layer |
| 27 | P. Ogar, D. Gorokhov, E. Ugryumova Relative Contact Area by Indentation and Flattening of Rough Surfaces Spherical Asperities |
| 28 | I. Levanov, E. Zadorozhnaya, D. Vichnyakov Influence of Friction Geo-Modifiers on HTHS Viscosity of Motor Oils |
| 33 | P.I. Malenko, K.J. Relmasira, A.Yu. Leonov Application of Method of Molecular Dynamics (MMD) for Modeling the Process of Dislocation of Hardening of Surface Zone |
| 35 | Y. Rozhdestvensky, K. Gavrilov,A. Doikin Influence of Location of Lubrication Sources on Hydromechanical Characteristics of Diesel Crankshaft Bearings |
| 36 | K. Gavrilov, A. Doikin, M. Izzatulloev, Y. Goritskiy Numerical Model of Mechanical Interaction of Rough Surfaces of Journal Bearings of Piston Engine |
| 37 | E. Torskaya, A. Mezrin, Ju Carlos Sanchez-Lopez Fracture of TiC/a-C(:H) Coatings in Friction Contact |
| 38 | E. Torskaya, T. Muravyeva, Juan Carlos Sanchez-Lopez Study of TiC/a-C(:H) Coatings before and after Friction by Nanoindentation |
| 39 | B.I. Kowalski, E.G. Kravcova, N.N. Lysyannikova Research Results of Influence of Synthetical Additive on Temperature Parameters of Moto Oils |
| 40 | A.V. Morozov, Yu.Yu. Makhovskaya Effect of Adhesion Properties of Frost-Resistant Rubbers on Sliding Friction |
| 42 | N.N. Lysyannikova, E.G. Kravcova, M.A. Kovaleva Control Method of Thermo-Oxidative Stability Factors of Synthetic Motor Oil |
| 44 | I.V. Kolesnikov, А.М. Mukutadze, V.V. Avilov Ways of Increasing Wear Resistance and Damping Properties of Radial Bearings with Forced Lubricant Supply |
| 46 | N. Berezhansky, A. Zaplatyn, R. Karymov Development of Bearing Beam and Seal System for Main Pumps |
| 48 | A.V. Kornaev On Proof of the Generalized Lagrange Variational Principle |
| 49 | S.V. Putintsev, S.P. Chirsky, S.S. Pilatskaya New Method of Tribological Testing Lubricants and Antifrictional Additives |
| 52 | A.S. Fetisov, A.V. Kornaev, N.V. Tokmakov Friction and Vibration in Journal Bearings Operating with Nanofluids: Experimental Results |
| 53 | O.V. Dushko, G.V. Voronkova, S.S. Rekunov Optimisation of Piston Compressor Geometric Size Using the Genetic Algorithm Method |
| 55 | K.E. Kozlov, V.N. Belogusev, A.V. Egorov Development of Method and Instruments to Identify Efficiency of Tracked Vehicles |
| 57 | V.V. Shapovalov,V.B. Mishchinenko, G.A. Areshjan Modelling of Mobile Nonlinear Frictional Systems |
| 58 | V.V. Shapovalov, P.N. Stcherbak, R.A. Kornienko Forecast of Frictional Bonds Abnormal Status |
| Секция 1.3. Конструкторско-технологическое обеспечение машиностроительных производств | |
| 1 | A.V. Vyboishchik Modelling of Cutting Forces in Ball-End Milling |
| 3 | V.M. Volgin, V.V. Lyubimov, I.V. Gnidina Simulation of Ion Transfer during Electrochemical Shaping by Ultrashort Pulses |
| 4 | N.V. Vulykh Microprofile Model Form Changing Research at Axisymmmetric Deformation with Account of Scale Factor |
| 5 | Yu.I. Brovkina, A.N. Sobolev, A.Y. Nekrasov Research of Characteristics and Parameters of Cycloidal Gear |
| 8 | P.G. Pyrikov Technological Aspects of Quality and Renovation of Machines |
| 9 | А.А. Коzlov, А.М. Коzlov, Yu.V. Vasilenko Raster Marking of Surfaces with Elastic Coating |
| 10 | B.А. Lopatin, R.I. Zaynetdinov Cutting Teeth of Non-Involute Gears of the Cylinder-Conical Internal Transmission of Internal Gearing |
| 11 | T.N. Ivanova, V.N. Tyukpiekov Mathematical Model of State of Stress in Cutting Area During Synthegran Machining |
| 12 | D.A. Rychkov, A.S. Yanyushkin, V.Yu Popov Specificity of Cutting Tool Wear in Processing of Polymer Composite Materials |
| 13 | L.G. Egorova, K.N. Vdovin, O.S. Logunova Diagnostics and Forecasting of Defects in Rotation Details |
| 15 | O.Yu. Erenkov, S.N. Khimukhin, A.I. Erukov Influence of Thermoplastics Advanced Ultrasonic Treatment on Treated Surface Roughness after Turning |
| 16 | V.V. Теlegin, А.M. Kozlov, А.V. Кirichek Solid Modeling in Autodesk Inventor at Initial Stage of Training of Specialists in Field Mechanical Engineering |
| 18 | V.Yu. Аncev, N.A. Vitchuk, V.V. Мiroshnikov Management Mechanism for Continuous Improvement of Production Processes Using Quality Management Methods |
| 19 | T.N. Ivanova Influence of Chemical Composition of Tough-to-Machine Materials on Grinding Technologies |
| 21 | L. Haritonova Neural Modeling of the Energy Efficiency Factor for Recuperators (Heat Exchangers) Using Impinging Jets for the Metallurgical Productions and Machine Building |
| 22 | Шандров Б.В., Булавин И.А., Самойлова А.С. Повышение качества сборки подшипниковых узлов на основе адаптивного управления регулировкой преднатяга подшипников |
| 24 | V.N. Tyshkevich, V.A. Nosenko, A.V. Sarazov Determination of Optimal Conditions for Flat Grinding of 20Kh Steel Workpieces |
| 25 | I.Е. Lyuminarsky, S.Е. Lyuminarsky, E.S. Lyuminarskaya Increased Durability of Flexible Gear of Harmonic Drive due to Flexible Bearing Modification |
| 28 | A.V. Korobko, S.Yu. Savin, Yu.E. Balikhina Estimation of Geometrical Torsion Rigidity of Triangular and Rectangular Sections Using Interpolation Method |
| 29 | V.I. Korobko, N. G. Kalashnikova, O. V. Kalashnikova Determination of Maximum Deflection of Elastically Isotropic Plates with Combined Boundary Conditions Using Scaling Method |
| 30 | S.I. Gvozdkova, L.E. Shvartsburg Analysis of Methods for Increase of Sound-Proofing Structure Efficiency for Noise Reduction during Technological Processes of Machinery Production |
| 34 | L. Mironova, L. Kondratenko, V. Terekhov To Question of Creation of General Theory of Deep Holes Machining |
| 37 | A.V. Antsupov, A.V. Antsupov, M.G. Slobodianskii Overhaul-Period Renewal of Cement Kiln Rotary Drive |
| 38 | Alexey V. Antsupov, V.P. Antsupov, Alexander V. Antsupov Model of Failure Due to Wear Process for Mill Rolls Universal Spindle Couplings |
| 41 | A. Kapitanov, V. Mitrofanov General Principles and Design Strategy of Optimal Reconfigurable Manufacturing Systems |
| 43 | M. Kozochkin, D. Allenov, I. Andryushchenko Use of Vibro-Acoustic Monitoring for Stabilization Stress-Strain State of Surface Layer of Workpiece During Cutting |
| 45 | L.G. Vainer Model and Analysis of the Grinding Wheels Transformation in Double Disc Grinding |
| 46 | K.V. Naigert, V.A. Tselischev New Generation Magnetorheological, Magnetodynamic and Ferrofluid Control Devices with Nonstationary Electromagnetic Fields |
| 47 | А.S. Kalashnikov, P.А. Кalashnikov, I.I. Marushchak Technological Peculiarities of Chemical-Heat Treatment of Alloyed-Steel Gears |
| 48 | N.A. Suhova, S.R. Shekhtman, M.Sh. Migranov Synthesis of Nanostructured Composite Coatings in Arc Discharge Plasma |
| 50 | N.V. Syreyshchikova, E.N. Yaroslavova Development of Methodological Recommendations for Selection of Flexible Abrasive Tool by Performance Indicator |
| 53 | A. Fomin, S. Kiselev Structural and Kinematic Analysis of a Shaper Linkage with Four-bar Assur Group |
| 54 | S.A. Kryukov, N.V. Baidakova Dependence of Roughness Parameters of Workpiece Surface on Structural Characteristics of Grinding Discs |
| 55 | S.A. Kryukov, N.V. Baidakova, P.Y. Bochkarev State of Problem of Technological Support of Workpiece Surface Quality During Grinding |
| 57 | T.N. Orlova, I.Y. Orlov, N.S. Hvan Physical and Mathematical Model of the Process of Face Grinding of Rails with Abrasive Wheels Operating at Speed of 50 m/s |
| 58 | V.M. Shumyacher, A.V. Slavin, O.G. Kulik Chip Formation Mechanism at Metal Grinding |
| 59 | V.M. Shumyacher, A.V. Slavin, P. Iu. Bochkarev Monitoring of Grinding Process with Help of Automatic Measuring Complex |
| 61 | O.G. Kulik, E.D. Illarionova Intensification of Technical Grinding Modes by Managing Physical Processes of Chip Formation |
| 62 | А.А. Gruzdev, Yu.А. Morgunov, B.P. Saushkin Tools for Electrical-Discarge Hole Drilling |
| 63 | I.P. Deryabin, A.S. Tokarev Specifics of Reaming Allowances of Different Materials with Indexable Throw-Away Inserts |
| 64 | R.M. Khusainov, P.N. Krestyaninov, D.D. Safin Experimental Optimization of Cutting Modes for Milling Based on Vibroacoustic Analysis |
| 65 | A.G. Ignatiev, V.V. Erofeev Selection of Priority Production Technology Based on Comparative Evaluation of the Oil and Gas Equipment Working Resource |
| 66 | E.A. Herreinstein, L.I. Korolkova, N. Mashrabov Statistical Processing Method of Cylinder Measurement Results |
| 67 | K. Syzrantseva, L. Chernaya Shafts Reliability Assessment in Accordance with Criteria of Fatigue Strength under Random Load Conditions |
| 68 | E. Levchenko, Yu. Deykun, Yu. Moroz Тheoretical Foundations of Vibration Processing Modeling |
| 69 | S.A. Malakanov, O.S. Zhelezkov Modeling Stress State Carbide Dies for Hexagonal Rods Production |
| 70 | M.N. Nagorkin,V.P. Fyodorov, E.V. Kovalyova Automation of Technological System Diagnostics by Parameters of Quality of Surfaces of Machined Parts |
| 71 | I.N. Khaimovich Computer-Aided Design of Die Tooling for Large Parts of Airfoil Profiles |
| 72 | V.Syzrantsev, A. Pazyak Determining Precessional Gearboxes Efficiency of Manual Pipeline Valve Drives |
| 73 | A. Bobkov Engineering Calculation of Axial Force Acting on Rotor of Electric Pumping Unit of Space Thermal Regulation Systems |
| 74 | L.E. Shvartsburg, E.V. Butrimova, O.V. Yagolnitser Assurance of Quality Indices of Technological Processes of Form-Shaping During Preproduction Stage |
| 75 | Кузнецов В.А., Коровин А.В., Щедрин А.В. Исследование процессов резания и поверхностного пластического деформирования в среде СОТС с наноразмерными антифрикционными частицами |
| 76 | V.A. Kuznetsov, A.V. Shchedrin, A.V. Korovin Investigation of Cutting Processes and Surface of Plastic Deformation in Environment of LCTE with Nanosize Antifriction Particles |
| 77 | V.P. Antipin, M.Ya. Durmanov, O.A. Mikhaylov Choosing Transmission Gearset for Agricultural Aggregates Based on Energy Consumption |
| 78 | M.Ya. Durmanov, B.G. Martynov, S.V. Spiridonov Energy and Fuel Consumption of Agricultural Aggregate |
| 79 | A.V. Shchurova Effect of Tool-Operating Mode on Circularity Deviation in Multi-Lobed Turbine Rotor Journal Restoration with Location on Bearing Bottom Half |
| 80 | I.A. Shchurov Improved Axis Determination Method for Calculation of Virtual Pitch Thread Diameter Using a Point Cloud from CMM |
| 81 | I.A. Shchurov, A.V. Nikonov SPH Modeling and Experimental Study of Unidirectional Fiber-Reinforced Composite Cutting |
| 82 | N. Kanatnikov,O. Ivanova, G. Harlamov Strengthening of Low-Alloyed Steels by Carbides During Carbon-Black-Gas Carburizer Cementation |
| 85 | A.F. Denisenko, M.V. Yakimov Dynamics of Spindle Assembly Metal-cutting Machine-tool with Anisotropic Elastic Support |
| 88 | D.T. Safarov,S.V. Kasyanov, A.G Kondrashov Informative Value of Measurements for Quality Management of Auto Parts |
| 89 | N. Pokintelitsa, E. Levchenko Investigation of Parts Thermo-Frictional Treatment Using Special Dynamic Appliances |
| 91 | G. Barsukov, T. Zhuravleva, O. Kozhus Methodics of Quality of Hydroabrasive Waterjet Cutting Machinability Assessment |
| 93 | Y.V. Turuk, N.I. Sysoev, B.B. Lugantsev Substantiation of Structure and Basic Design Parameters of Devices for Orienting Powered Support Relatively to Face Conveyor in Formation Plane |
| 95 | I.S. Boldyrev SPG-Simulation of Free Orthogonal Cutting for Cutting Forces Prediction |
| 96 | Yu.A. Izvekov, E.M. Gugina, V.V. Shemetova Structural Risk Analysis as Basis for Quality Control of Metallurgical Systems |
| 97 | P.P. Pereverzev, A.V. Akintseva, M.K. Alsigar Use of Dynamic Programming Method to Design for Optimal Performance of Grinding Cycles |
| 98 | P.P. Pereverzev, A.V. Akintseva, M.K. Alsigar Modeling Relationship between Different Stages of Cylindrical Grinding Process with Axial feed in Reversal Zones |
| 100 | N.V. Lishchenko, V.P. Larshin Profile Gear Grinding Temperature Determination |
| 102 | N.V. Syreyshchikova, V.V. Batyev Development of Complex of Performance Indicators of a Flexible Abrasive Tool for Assessing the Effectiveness of Application |
| 103 | V.A. Gafarova, N.K. Krioni, A.D. Mingazhev Renovation Repair Of Trunk Pipeline While Operation |
| 104 | D. Bylinkin, A. Zaplatyn, R. Karymov Development of Advanced Technologies for Secondary Use of Thermal Energy |
| 105 | S. Bratan, B. Bogutsky, S. Roshchupkin Development of Mathematical Model of Material Removal Calculation for Combined Grinding Process |
| 108 | F.V. Grechnikov, A.V. Kochetkov, O.V. Zakharov Method for Compensation of Radius and Shape of Spherical Probe when Measuring Complex Surfaces with CMMs |
| 111 | R.B. Tukaeva, A.A. Prokhorov, O.Yu. Miniakhmetov Magnetic Inspection for Assessing the Uniformity of Flange Joints Bolt Tightening |
| 114 | Ya.N. Oteny, E.V. Morozova, V.F. Kazak Research of Temperature Phenomena during Machining Surface Plastic Deformation of Detail |
| 116 | A.V. Zotov, D.A. Rastorguev, O.I. Drachev Neural Network Modeling and Prediction of Adhesion of Coatings Applied by Wire Tool |
| 118 | A.A. Udalov, S.V.Parshin, A.V. Udalov Mechanism for Flow Forming of Cylindrical Workpiece |
| 119 | A.A. Ryzhkin, E.V. Fominoff, C.G. Shuchev Study on Tribological Characteristics of High Entropy High-Speed Steels in Conditions of Dry Friction on Structural Steel |
| 120 | V.V. Maretskaya, A.V. Zaytsev Assurance of Quality Characteristics for Electric-Weld Pipe Mill Roll |
| 122 | I. Katalazhnova Correlation and Regression Method of Centrifugal Pump Geometry Optimization |
| 123 | A.V. Dmitriev, E.I. Salakhova, O.S. Dmitrieva Optimization of Flows in Jet-Film Contact Devices |
| 124 | V.M. Volgin, V.D. Kukhar, A.E. Kireeva Multiphysics Simulation of Electromagnetic Forming of Aluminum Alloy Tubes |
| 125 | A.I. Ogorodnikov, Yu.N. Zhukov Predictive Modeling of Scribing Brittle Material Using Diamond Tool with Improved Geometry |
| 126 | V.A. Chekanin, A.V. Chekanin Packing Compaction Algorithm for Rectangular Cutting and Orthogonal Packing Problems |
| 127 | S. Lukina, M. Kosov, I. Tolkacheva Predictive Modeling of Design Innovative Solutions on Tooling Configurations at High-tech Manufacturing Companies |
| 128 | A. Bobkov Method of Energy Efficiency Increase of Low Power Radial Impeller Micromachines |
| 129 | A.V. Dmitriev, I.N. Madyshev, O.S. Dmitrieva Separation Efficiency of the Heat-Mass Transfer Apparatuses With Jet-Film Contact Devices |
| 130 | S. Lukina, M. Krutyakova Methodology for Automated Design of Optimum Cylindrical Broach Structures Developed by Total of Criteria |
| 132 | I. Manaenkov, V. Makarov Forming and Selection Technique for Optimal Configuration of Form Shaping System for Multiple-Axis Machining |
| 133 | L.A. Barkov, M.N. Samodurova, D.P. Galkina Rolling of Refractory Metals on Four-Roll Passes Rolling Mills |
| 135 | L.A. Barkov, M.N. Samodurova, Yu.S. Latfulina Dependences of Blanks Density from Pressing Force and Packing Density of Molybdenum and Tungsten Powders |
| 136 | M.N. Krasnova, S.V. Safonov, D.M. Chernykh Experimental Installation for Analysing the Dynamics of Cutting Forces and Vibrations at High Frequencies of Machine Spindle Rotation |
| 137 | S.D. Smetanin, V.G. Shalamov System Approach and Multivariance of Screw Surface Profiling |
| 138 | M.G. Galkin, A.S. Smagin Practice of Dimensional Modeling of Assembly Operations Using Static Compensators |
| 139 | M.G. Galkin, A.S. Smagin Computer-Aided Algorithm for Non-linear Optimization of Pre-Machining Using Measuring Instrument |
| 140 | E.V. Zenkov, L.B. Tsvik Verification of Finite Element Model of Deformation of Laboratory Sample for Mechanical Tests by Method of Digital Images Correlation |
| 141 | D. Slavgorodskaya, V. Bugaev Impact Impulse Research During Ice Navigation with Computer Modeling |
| 142 | Z.R. Mukhametzyanov, A.V. Rubtsov, A.S. Valiev Estimation of Influence Character of Installation Loads on Degree of Corrosive Wear of Column Apparatus |
| 143 | G.S. Morokina, Zagdzusem Mungunkhulug Radiation Individual Control Method in Engineering |
| Секция 1.4. Наземные транспортно-технологические машины | |
| 1 | V.V. Shekhovtsov, N.S. Sokolov-Dobrev, M.V. Lyashenko Technology of Creation of Three-Dimensional Model of Tractor Transmission in Program Package “Universal Mechanism” |
| 3 | T.A. Balabina, Yu.I. Brovkina, A.N. Mamaev Elastic Toroidal Wheel Rolling with Side Slip |
| 5 | K.T. Mambetalin The Calculation of Reserve Coefficient Clutch |
| 9 | A.A. Shelepov, D.I. Istomin, E.E. Rikhter Efficiency of Application Self-blocked Cross-Axle Screw-ball Differential at Car 4x4 Movement on Not Deformable Base Surface |
| 10 | S.V. Streltsov, V.A. Ryzhikov Influence of Uneven Braking of Running Wheels on Stress-Strain State of Crane Metal Structure |
| 11 | P.V. Vitchuk, V.Yu. Antsev, A.A. Obozov Lifting Mechanism with Ribbon Brake |
| 12 | A. Startcev, S. Romanov, O. Vagina Increasing Engine Power by Applying Water Injection |
| 13 | E.M. Itkis, E.A. Fedyanov, Y.V. Levin Experimental and Numerical Investigation of Influence of Hydrogen Addition to Hydrocarbon Fuel on Wankel Rotary Engine Performance |
| 14 | A. Startcev, S. Romanov, G. Romanova Influence of Water Injection on Performance of Diesel Engine |
| 16 | К.А. Goncharov, А.V. Grishin Synthesis of Main Parameters and Experimental Approbation of Test Bench for Study of Working Processes of Intermediate Belt Conveyor Drive |
| 17 | E. Podchasov, A. Terenteva Theoretical Methods for Precision Increment of Earthwork Made by Power Shovel Actuator |
| 19 | A.I. Nefed'ev, G.I. Sharonov, I.E. Ilyina Three-Position Solenoid Valve for Pneumatic Systems of Trucks |
| 22 | I.A. Teterina,P.A. Korchagin, A.B. Letopolsky Investigation of Soil Destruction by Trench Chain Excavator Cutting Element Process |
| 23 | V. Kushnir, N. Gavrilov,T. Shkotova Improvement of the Extruder Construction |
| 24 | I.P. Troyanovskaya, I.Yu. Novikova, I.S. Zhitenko New Roller Testing Unit for Vehicles |
| 26 | A.V. Lysyannikov, V.G. Shram, Y.F. Kaiser Modern State and Development of Grader Blades for Earth Moving and Snow Removal |
| 27 | A.V. Gritsenko, V.D. Shepelev , E.V. Shepeleva Optimizing Consumption of Gas Fuel Using Static Method of Tuning Automobile Gas-Cylinder Equipment |
| 29 | A.M. Plaksin, Z.V. Almetova, A.E. Popov Method and Means for Shutting Off Individual Cyclic Feeds of ICE and their Use for Measuring ICE Speed and Load Characteristics |
| 30 | D. Kushaliyev, L.T. Shulanbayeva, B.A. Ermanova Repair Kit Application with Spring Insert in Silentblockof Amortizor |
| 31 | D.B. Vlasov, A.G. Ignatiev, Z.V. Almetova Methodological Aspects of Diagnostics of Electric Gasoline Pumps in Operation of Automobiles |
| 32 | P.V. Boslovyak, M.M. Jileykin Optimal Design of Steel Structure of Conveyor with Hanging Belt |
| 33 | Ye. Koshkarev, M. Stepanov Determination of Scope of Two-Arm Concrete Placing Booms |
| 34 | K.V. Naigert, V.A. Tselischev Hardware Implementation of Automatic Control System for New Generation Magnetorheological Supports |
| 35 | A.V. Kostukov, L.A. Kosach, A.S. Gornovskii Microturbine with Heat Exchanger with Regeneration Ratio Equal 95% |
| 36 | A. Fomin, A. Olexenko Study on Structure and Kinematics of Quick-Return Mechanism with Four-Bar Assur Group |
| 39 | O. Ognev, A. Yanikov, Y. Stroganov Optimization of Maintenance Service Parameters on the Example of Motor Transport Company Located in North-West Region of the Russian Federation |
| 40 | T. Ripol-Saragosi, L. Ripol-Saragosi System Approach Realization under Compressed Air Quality Increase Strategy Choice Based on Resource-Saving |
| 41 | O. Lukashuk, A. Komissarov, K. Letnev Operation Parameters Matching for Main Mechanisms of Open-Pit Excavators Employed in Rock Excavation |
| 42 | O. Lukashuk, A. Komissarov, K. Letnev Distribution of Consumed Power between Drives of Main Mechanisms in Open-Pit Excavators uring the Process of Rock Excavation |
| 48 | I.A. Lagerev, A.V. Lagerev Research of Dynamics of Hydraulic Loader Crane in Case of Conjoint Movement of Sections |
| 49 | B.A. Kaitukov, M.A. Stepanov Selection of Mixers for Preparation of Quality Building Mixtures |
| 51 | N.A. Fomenko, S.V. Aleksikov, S.G. Artemova Hydraulic Drive Relieving Device for Road Construction Machines |
| 52 | G.G. Nadareishvili,V.V. Galevko2, R.I. Rakhmatov Improvement of Acoustic Characteristics of Motor Vehicle Intake System Based on Calculation and Experimental Research |
| 55 | V.S. Isakov, V.P. Maksimov, Y.V. Maksimov Evaluating the Effectiveness of the Cable Excavator Bucket Swing Mechanism |
| 56 | D.Ya. Antipin, V.I. Vorobiev, М.А. Maslov Improving Construction of Magnetic Clutch Amplifiers of Locomotive Wheels with Rails |
| 57 | D.Ya. Antipin, E.V. Lukashova Technique of Increasing Passenger Comfort by Ensuring Rational Parameters of Flexural Stiffness of Bodies of Passenger Cars |
| 58 | V.I. Vorobiev, O.V. Izmerov, S.O. Kopyilov Features of Decision Making Simulation When Designing Locomotive Underframe Part |
| 61 | Yu.I. Moiseev, A.V. Popov, K.A. Badikov Modernization Gas Purifying System In Bus Methane Feed System |
| 63 | R.Yu. Dobretsov, A.V. Lozin, M.S. Medvedev Hyperbolic Steering for Tracked Vehicles |
| 66 | I.A. Yaitskov Theoretical Study of the Vibrations Transmitted to Frame from Internal Combustion Engine of Locomotives and Diesel Locomotives and Their Influence on Labour Conditions of Locomotive Crews |
| 71 | A.N. Gots, V.S. Klevtsov Choice of Destruction Criteria of Cylinder Heads of Piston Engines |
| 72 | D.N. Kuimov, A.V. Pavlenko Design of Inductor as Knot of Electromechanical Converter with Secondary Discrete Part |
| Секция 1.5. Оборудование и технология сварочного производства | |
| 1 | V.L. Broido, S.S. Chernyak Welding and Build-Up Technologies at Dredge Scooping Pin Manufacture and Renovation |
| 2 | D.A. Gaponova, A.V. Shcherbakov, R.V. Rodyakina Investigation of Wire Feed Control Channel in Additive Manufacturing Unit |
| 4 | E.P. Nikolaeva, A.Yu. Nikolaev Measurement of Residual Stresses in Thin-Sheet Welded Constructions of Low-Alloyed Steel |
| 5 | L.I. Korolkova, A.V. Herreinstein, N. Mashrabov Filler Wire Feeding Device |
| 6 | V.V. Abramov, Yu.P. Rakunov Kinetics of Contact Interaction between Dissimilar Solid Materials by Pressure Welding with Heating |
| 10 | V.N. Lastovirya, A.A. Cherepakhin, R.V. Rodyakina Determination of Functional Relation Between Parameters of Weld Penetration Shape and Measurable Output Variables in Electron-Beam Welding Process |
| 11 | M. Nurguzhin, G. Danenova, T. Akhmetzhanov Computer Modeling of Residual Stresses and Strains at Arc Welding by Modulated Current |
| 13 | L. Shron, V. Bogutsky, E. Yagyaev Study Оn Dispersion Of Concentrator Geometric Parameters In Fillet Welded Joints |
| 14 | S. Ivanov, E. Valdaytseva, S. Stankevich Numerical Analysis of Surface Formation of Titanium Parts During Direct Laser Deposition |
| 15 | P.A. Golovin, A.M. Vildanov, K.D. Babkin Optimization of High-Speed Direct Laser Deposition Regime Parameters in Titanium Blades Production |
| 16 | N. Astafeva Tungsten Electrode Fracture in Submerged Arc Welding Process | Раздел 2. Материаловедение и технологии промышленного производства |
| Секция 2.1. Новые функциональные материалы и технологии | |
| 1 | G.V. Nesvetaev, Y.I. Koryanova, T.N. Zhilnikova Coefficients for Calculation of Deformation-Strength Characteristic of Concrete for Injection with Two-Stage Expansion |
| 2 | G.V. Nesvetaev, Y.I. Koryanova , A.V. Kolleganov E-Modulus and Creep Coefficient of Self-Compacting Concretes and Concretes with Some Mineral Additives |
| 3 | A.V. Vyboishchik , I.L. Kostiunina Producing Improved Masonry and Protective Paints by Means of Modifying and Introducing Additives in Liquid Glass |
| 5 | С.V. Davydov, А.О. Gorlenko Morphology of Tungsten Carbide Inclusions in Wear-Resistant Coatings of Carbon Steels |
| 6 | R.V. Gavariev, I.A. Savin Research of the Mechanism of Destruction of Compression Molds for Casting Under Pressure of Color Alloys |
| 10 | V.F. Balakirev, V.V. Krymsky, N.А. Shaburova Electromagnetic Pulse Treatment of Silumin Under Experimental and Industrial Conditions |
| 11 | A.M. Stolyarov, M.V. Potapova, M.G. Potapov Influence of Different Factors on Withdrawal Speed of Continuous Cast Billet |
| 14 | M. Filippov, N. Ozerets, S. Nikiforova, E. Smagireva Increasing the Abrasive Wear Resistance of High-chromium Steel after Cold Treatment/td> |
| 15 | L. Shtirc, S. Vlasova, K. Zemlyanoi Synthesis of Porous Heat-Insulating Material from Industrial Waste |
| 16 | N.Yu. Dudareva, A.B. Kruglov, R.F. Gallyamova Structure and thermophysical properties of coatings formed by the method of microarc oxidation on an aluminum alloy AK4-1 |
| 17 | V.I. Loganina, Ch.V. Zhegera Estimation Of Strength Of Coating Of Solvent Layer On The Basis Of Adhesive Building Mixture |
| 18 | V.A. Perfilov, V.V. Gabova Nano Modified Foam-Fiber-Concrete Mixture |
| 19 | A.V. Shaparev, I.A. Savin Influence of the State of the Contact Surfaces on the Formation of the Joint of Steel and Brass during Cold Cladding |
| 26 | I.G. Shubin, М.V. Shubina Methodology of High-Carbon Wire Rod Perlite Grain Grade Identification |
| 27 | K.N. Vdovin, М.V. Shubina, I.G. Shubin Investigation of Grey Cast Iron Microstructure Influence on Its Heat Resistance |
| 28 | E.G. Sokolov Structure Formation During Liquid-Phase Sintering of the Diamond-Containing Composites with Sn-Cu-Co-W Binders |
| 34 | M. Filippov, G. Yagudin, V. Legchilo, N. Ozerets The Usage of Metastable Austenite to Increase the Wear Resistance of Steels of the Pearlite Class |
| 36 | Yu.B. Egorova, L.V. Davydenko, Ye.V. Chibisova Heat Treatment Regimes Influence on Mechanical Properties of Forging Products of ?+?- and Pseudo- ?-Titanium Alloys |
| 37 | P.G. Ivanochkin, K.N. Dolgopolov, S.A. Danilchenko Creation of Oil-Filled Composites of Tribotechnical Purpose Based on Aromatic Polyamide Phenylone C-2 |
| 38 | O. Fomina, A. Stolboushkin, M. Druzhinin Method for Parameter Determination of Ceramic Products Compression using the Mounting for Curves Readout |
| 41 | V.V. Kukhar, A.V. Grushko, I.V. Vishtak Shape Indexes for Dieless Forming of the Elongated Forgings with Sharpened End by Tensile Drawing with Rupture |
| 42 | D.I. Tishkevich, A.V. Trukhanov, S.S. Grabchikov Electrodeposited Bismuth Shields against Electron Irradiation for Aerospace Application |
| 46 | P.V. Matyukhin Modification of the Hematite Filling Surface of New Composition Material during High Pressure Testing |
| 48 | V.A. Nosenko, A.V. Fetisov, V.Ye. Puzyrkova Morphology and Chemical Composition of Silicon Carbide Surfaces Interacting with Iron Cobalt and Nickel in Microscratching |
| 49 | S.V. Nosenko, V.A. Nosenko, A.A. Koryazhkin The Effect of the Operating Speed and Wheel Characteristics on the Surface Quality at Creep-feed Grinding Titanium Alloys |
| 52 | A.A. Valeev, E.V. Morozova Simple Universal Kelvin Equation Valid in the Critical Point Vicinity External-Internal State Correction and their Application to Nitrogen Capillary Condensation in Mesoporous Silica SBA-15 |
| 53 | Zh.A. Sapronova, S.V. Sverguzova, A.V. Svyatchenko About a Possibility of Usage of Sugar beet Industrial Carbonate-Containing Byproducts in Dry Construction Mixtures and Oil Paints Manufacturing |
| 57 | A.A. Solobai, A.V. Trukhanov, S.S. Grabchikov Ni-Fe Alloys as Perspective Materials for Highly Efficient Magnetostatic Shielding |
| 58 | I.K. Domanskaya, E.S. Gerasimova Portland Cement with Mineral Fillers and Polymer Additives |
| 60 | A. Bogatov, D. Nukhov Development And Research Of The Method Of Severe Alternating Deformation In The Process Of Rolling Of Thick Steel Sheets And Plates Made Of Non-Ferrous Alloys |
| 61 | L.A. Porozhnyuk, E.V. Porozhnyuk The Development of a Purification Method of Sewage from Chromium (VI) by Iron-Containing Waste |
| 67 | O.V. Burlachenko, O.G. Chesnokova, T.F. Cherednichenko Research of Thermophysical Properties of the Ultrathin Liquid Heat-Insulation |
| 68 | A.Yu. Omarov, A.D. Shlyapin The Structure Phase Composition and Rheological Properties of Powders Obtained by Chemical Dispersion of Al Alloys with Mo V and Zr |
| 72 | G.A. Orlov, A.G. Orlov Qualimetry rating of hot-rolled pipes |
| 74 | N. Ozerets, V. Sharapova, A. Levina, T. Mal’tseva, M. Pavlov A Study of the Structure and Properties of Austenitic Metastable Steels under Strain |
| 75 | E.A. Kudryashov, I.M. Smirnov, E.V. Pavlov About Turning the Surface of a Part Formed by a Combination of Dissimilar Structural Materials with Break Elements |
| 76 | A.A. Redikultsev, G.M. Rusakov, M.L. Lobanov The Possibility of Obtaining Electrical Steel with Texture |
| 77 | I.N. Yegorov, N.Ya. Yegorov The Influence of Milling Regimes in Beater Mill on Particle Size Distribution and Structural Characteristics of Strontium Hexaferrite Powder |
| 78 | M.V. Maisuradze, M.A. Ryzhkov Microstructure and Mechanical Properties of High Strength Alloyed Steel for Aerospace Application |
| 79 | M.V. Maisuradze, A.A. Kuklina Numerical Solution of the Differential Diffusion Equation for a Steel Carburizing Process |
| 80 | V.I. Pastukhov, A.V. Kozlov, M.L. Lobanov Crystallographic Peculiarities of Shear ?-? Transformation in Austenitic Stainless Steel in the High Temperature Area |
| 81 | R.A. Shishkin, A.P. Zemlyanskaya, A.R. Beketov High PerformanceThermal Grease with Aluminum Nitride Filler and an Installation for Thermal Conductivity Investigation |
| 82 | Yu.Yu. Galkin, S.A. Udodov X-ray Phase Analysis of High-Aluminate Cements Under Conditions of Early Compression |
| 83 | A.Yu. Stolboushkin, A.I. Ivanov, O.A. Fomina A Study on Structure and Phase Composition of Cellular Ceramic Materials from Dispersed Silica-rich Rocks |
| 84 | A. Kamenskikh The Analysis of the Work of Materials of Mouthguard Designs during Biomechanical Deformation |
| 85 | V.S. Rudnov, V.A. Belyakov, R.T. Galiakhmetov New Technology of White Portland Cement Production in the Ural Federal District |
| 86 | V.G. Merzlikin, T.V. Zhubreva, A.V. Kostukov Modeling of the Structure of Heat-insulating Semi-transparent Materials and Coatings for Industrial and Transport Power Plants |
| 87 | V.G. Merzlikin, G.I. Bolkina, L.N. Ignatova Effective and Ecological Technologies of Application of Structured Materials for Roadbed in the Permafrost Regions |
| 88 | S.A. Parshina, A.Yu. Sokolov, E.O. Savchenko Technological Processes for Obtaining Monolithic Polydisperse Protein-Base Systems |
| 89 | A.T. Kanayev, A.V. Bogomolov, A.A. Kanayev Increase of Wear Resistance and Contact-Fatigue Strength of Wheel Steel by Plasma Hardening |
| 90 | V.V. Kukhar, A.V. Grushko, I.V. Vishtak Shape Indexes For Dieless Forming Of The Elongated Forgings With Sharpened End By Tensile Drawing With Rupture |
| 91 | Yu.V. Yuferov, F.M. Zykov, E. Malshakova Defects of Porous Self-structured Anodic Alumina Oxide on Industrial Aluminum Grades |
| 92 | Ch.V. Zhegera, I.S. Pyshkina Applications of Calcium Hydrosilicates and Amorphous Aluminosilicates in Lime Dry Mixes |
| 93 | O.B. Kolmachikhina, Y.A. Napolskikh, K.A. Vakula Nickel Extraction from Poor Solutions by Sorption on Modified Coke |
| 94 | E.R. Zvereva, A.O. Makarova, O.S. Zueva Methods and Materials of Nanotechnologies for Improving the Boiler Fuel Properties |
| 95 | A.A. Voznesenskaya, A.V. Zhdanov, D.A. Kochuev Investigation of the Influence of the Form Factor of Finely Dispersed Carbon Components on the Hydrophobicity of the Surface |
| 97 | M.A. Fedosov, O.B. Butusov Microstructural Analysis of Granular Metal-Ceramic Composite Materials of Matrix Type |
| 98 | V. Konukhov, S. Mukhanov, G. Konukhova Optimal Shape Selection of Heat Exchangers Surfaces during Convective Heat Transfer |
| 99 | N.Yu. Kiryushina, A.Yu. Semeykin Optimization of Wastewater Treatment from Cd2+ Ions Using Slag of Electric Furnace Steelmaking Production |
| 101 | E.S. Sergeeva Dependence of the Elastic Properties of a Single-Walled Carbon Nanotube on its Chirality |
| 102 | Yu.N. Belyayev, E.I. Yashin, O.Y. Yashina Conversion of Elastic Wave Polarization in Calcium Molybdate Layer |
| 104 | I.N. Shcherbakov, V.V. Ivanov, A.A. Korotkiy Elaboration and Investigation of Metallic Coating with Inclusion of Potassium Polytitanate |
| 105 | M.V. Novikov, E.E. Prokshits, A.N. Goykalov Creep and long-time strength of compression elements from foam concrete |
| 106 | T.N. Storodubtseva, A.А. Aksomitny, A.R. Sadrtdinov Thermal Insulation Properties Of Wood Polymeric Sand Composite |
| 107 | A.V. Matushkin1, Yu.A. Pyckin, S.V. Anakhov, I.Y. Matushkina About Raising of the Gas Vortex Stabilization Efficiency in Plasma Torch for Metal Cutting |
| 108 | S.I. Platov, V.A.Nekit,N.N. Ogarkov Comparative Evaluation of Analytical Methods for the Determination of Coefficients of Friction and Stresses when Wire Rod Drawing |
| 109 | N.S. Lupandina, N.Yu. Kiryushina, E.V. Porozhnyuk Adsorption Activity of Thermally Modified Shell Hazelnut in Relation to Ions Ni2+ |
| 110 | G.G. Mikhailov, T.M. Lonzinger, V.A. Skotnikov Effect of Thermochemical Treatment on the Structure and Mechanical Properties of Materials Based on Aluminum Oxide |
| 111 | V.A. Ivanov, S.P. Zakharychev Reinforced Antifriction Epoxy Fluoroplastics |
| 112 | Yu.M. Kosichenko, O.A. Baev Geo-composite Materials with Preset Properties and Their Application in Hydraulic Engineering Construction |
| 114 | V.I. Kuz'min, V.I. Lysak, E.V. Kuz'min A Study of the Structure and Regularities of Formation of the Compounds during Explosive Welding of Steel-Aluminum Composite |
| 118 | N.P. Lukuttsova, E.G. Karpikov, S.N. Golovin Highly-Dispersed Wollastonite-Based Additive and its Effect on Fine Concrete Strength |
| 119 | L. Gurevich, D. Pronichev, R. Novikov The Effect of Soft Interlayers on the Behavior of a Four-Layer Titanium-Steel Composite at High Temperatures |
| 120 | L. Gurevich, D. Pronichev, R. Novikov Compressive Strength of Four-Layer Titanium-Steel Adapter with Soft Interlayer of Varying Thickness |
| 121 | N. Kanatnikov, P. Kanatnikova, D. Pickalov Thermal Processes Simulation during Processing Bevel Gears |
| 124 | E.V. Solomin, E.A. Sirotkin, I.M. Kirpichnikova Efficiency Analysis of the Friction Material for the Wind Turbine Braking System |
| 126 | R.F. Gallyamova, S.N. Galyshev, F.F. Musin, A.G. Badamshin, V.A. Dokichev Investigation of Protective Coatings for Carbon Fibers by the Sol-Gel Method |
| 127 | P.V. Solovyev, A.I. Gomzin, L.A. Ishbulatov, S.N. Galyshew, F.F. Musin Stress-Strain State Exploration of Stringer Made of Composite Materials Depending on Layers Stacking Structure |
| 128 | M.M. Kosukhin, A.M. Kosukhin The Research of the Influence of Ferruginous Aggregates Surface and Polyfunctional Modifiers on Interfacial Phenomena and Strength Formation of the Contact Area in Concretes |
| 129 | I.V. Starostina, A.E. Nikitina, Y.V. Porozhnyuk Magnetic Petroleum Sorbent Based on Waste Kieselghur Sludge from Oil Extraction Industry for Removing Petroleum Products from Water Surface |
| 133 | V.D. Tukhareli, O Y. Pushkarskaya, A.V. Tukhareli Methodological Approaches in Assessing the Possibility of Using Waste Electrocorundum Materials in Concrete Compositions |
| 135 | V.M. Lipkin, L.N. Fesenko, S.M. Lipkin Tin Powders Electrodeposition from Choline Chloride Based Ionic Liquid |
| 136 | A.V. Shcherbakov, R.V. Rodyakina , D.A. Gaponova Using of Smoothed Particle Hydrodynamics Method for Constructing a Mathematical Model of Electron-Beam Surfacing Process |
| 137 | I.Cherunova, L. Osipenko, M. Stenkina Influence of Structure and Composition of the Fibrous Materials on the Performance Characteristics of Thermal Protection Structures with Combined Functions |
| 139 | A.V. Zhelnina, A.G. Illarionov, A.V. Trubochkin Study of Interstitial Impurities Influence on Properties of Titanium Alloy Ti-5Al-5V-5Mo-3Cr-1Zr |
| 141 | A. Kamenskikh, M. Bartolomey Analysis of Elastoplastic Behavior Model of Antifriction Polymers |
| 143 | А.А. Lukash, N.P. Lukutsova Technological Features of the Production of Embossed Plywood |
| 144 | T.M. Lonzinger, V.A. Skotnikov Increase in the Slag Resistance of Refractories Based on the Al2O3-Sic-Sio2 System |
| 145 | M.M. Kosukhin, A.M. Kosukhin A Mechanism of Action of a Polyfunctional Modifier Made of Hydrocarbons Production Waste in Mineral Suspensions Based on Fine-Ground Cements |
| 147 | Т.А. Vasilenko, M.Р. Lamakina, O.M. Brusnitsyna The Purification of Electroplating Industry Effluents with Agricultural Waste |
| 148 | Т.А. Vasilenko, A.D. Mishina Designing a Technology of Industrial Sewage Waters Purification from the Spent Polishing Powder Based on Ceric Oxide |
| 149 | A.A. Sukhikh, V.B. Dement’ev, T.M. Makhneva Properties of Austenite in Maraging Steel |
| 150 | O.V. Tarakanov, E.A. Belyakova, V.S. Yurova Complex Organomineral Additives with Hardening Accelerator |
| 151 | R.R. Safin, E.A. Beliakova, A.R. Mukhtarova Heat Treatment of Wood in Liquids |
| 152 | M.A. Vasilyeva Influence of the Accuracy of Determining the Inner Diameter of Pressure Polyethylene Pipes by the Amount of Head Loss by Length |
| 153 | V.A. Guryeva, A.V. Doroshin Building Ceramics Based on Carbonate-Containing Raw Materials |
| 154 | А.А. Lukash, N.P. Lukutsova Determination of the Geometric Parameters of Round Logs as Functional Materials for Wooden Housing Construction |
| 155 | S.B. Mikhailov, N.A. Mikhailova, V.A. Sharapova Zero Background Line for Iron Alloys Samples Dilatographs Decoding |
| 156 | V.V. Karzhavin, L.V. Maltsev, V.V. Bakina Study on Surface Layers of Aluminum and Titanium Alloys and Analysis of Their Scuff Resistance |
| 157 | I. Garkina, A. Danilov A Design of Composite Materials with Desired Properties |
| 158 | T.V. Shveyova, V.I. Astashchenko, A.I. Shveyov New Decisions in Manufacturing Techniques of the Cemented Parts of Cars |
| 160 | L.N. Shafigullin, A.R. Ibragimov,A.I. Saifutdinov An investigation of the effects of High Temperature on Mechanical Properties of Thermal Spray Coatings Applied by Plasma Spraying |
| 161 | A.A. Vishnevskiy, F.L. Kapustin Problems of Autoclaved Aerated Concrete Treatment |
| 162 | D.V. Gadeev, A.G. Illarionov Determination of Beta-Transus Temperature of Two-Phase Titanium Alloys Using Differential Scanning Calorimetry |
| 165 | Yu.L. Starostina, O.A. Plotnikova Efficient Autoclaved Silicate Concretes with the Use of Steelmaking Slag |
| 166 | Yu.L. Starostina, L.V. Denisova, L.A. Porozhnyuk The Processing of Citrogypsum for Obtaining Modified Gypsum Binders and Composite Materials on Their Basis |
| 167 | V.I. Astashchenko, E.V. Purtova New Technology of Hardening of Chromium-Nickel Steel Parts |
| 168 | V. Kuts, A. Byshkin, S. Khodyrevskaya The Method and Device for Automated Material Elastic and Proportionality Limits Calculation |
| 170 | V.M. Zhikharev, M.S. Pavlovskaya The Dependence of Gibbs Energy of Formation of Niobium Mono-nitride on its Composition and Temperature in the Range of 1773-2023 K |
| 171 | R.N. Gadelshin, P.V. Ponomarev, A.R. Kurbangaleeva, S.I. Volfson, Yu.N. Khakimullin Effect of Organoclays on Fire Resistance of Siloxane Rubbers |
| 172 | Овсянников Б.Л. Особенности тепловых процессов на электродах при электроэрозионной микрообработке |
| 174 | V.V. Berezovskaya, A.V. Berezovskiy, D.H. Hilfi Laser Welded Joints of High-Nitrogen Austenitic Steels: Microstructure and Properties |
| 175 | A.T. Gabdrakhmanov, I.H. Israphilov, L.N. Shafigullin Increasing Efficiency of the Laser Action to Materials |
| 176 | V.S.Rudnov, V.A. Belyakov, R.T. Galiakhmetov New Concrete for Protection from Radiation in the Urals Based on Natural Fillers |
| 177 | V.P. Shveikin Thermomechanical Hardening of Steels |
| 179 | M.S. Gribkov, M.A. Portnov, A.S. Kozhechenko Influence of Electrode Gaps Value in Electron Gun on the Penetrating Ability of Electron Beam during the Implementation of Additive Processes |
| 182 | M.O. Sklyar, O.G. Klimova-Korsmik, G.A. Turichin, S.A. Shalnova Influence of Technological Parameters of Direct Laser Deposition Process on the Structure and Properties of Deposited Products from Alloy Ti-6Al-4V |
| 183 | V.G. Klimov, S.S. Zhatkin, А.V. Kogteva Using VPr11-40N Brazing Powder as a Wear-Resistant Cladding for GTE Blade Airfoils |
| 184 | M.A. Goncharova, R.A. Gorin, O.V. Karaseva The Formation of Composite Curing Systems Based on Technogenic Raw Materials |
| 185 | Shalnova S.A., Klimova-Korsmik O.G., Sklyar M.O. Influence of the Roughness on the Mechanical Properties of Ti-6Al-4V Products Prepared by Direct Laser Deposition Technology |
| 187 | A.V. Khandoshka, S.G. Vlasova The Choice of Chemical Composition and Raw Materials for the Production of Basalt Wool with the Defined Characteristics |
| 188 | A.V. Mikhailov, A.S. Fedorov Preliminary Study of Tubular Peat Extrusion |
| 191 | A.V. Ryabov, T.V. Prokaeva, Yu.E. Amosova Free-Cutting Cr–Ni–Mo Steel |
| 194 | I. Kovyazina, S. Vlasova, F. Kapustin Hydrolytic Resistance of Na2O–SiO2–SnO2 Glass System |
| 195 | A.Yu. Rodichev, A.V. Sytin, V.O. Tyurin Varying of Oil Consumption of Fluid-Film Bearings Surface Layer by Means of Application of Anti-Friction Coatings |
| 196 | A.V. Korolev, A.F. Balaev, A.A. Korolev Experimental Study of the Effectiveness of the Vibromechanical Stabilization of Bearing Rings |
| 197 | A.V. Korolev, A.F. Balaev, A.A. Korolev The Study of Ultrasonic Relaxation of Residual Stresses of Metal Plates Using Computer Simulation |
| 199 | A.G. Panov, D.A. Gurtovoy, I.F. Shaekhova About the Possibility of Increase in CGI Properties by Austempering |
| 200 | L.N. Fesenko, I.V. Pchelnikov, R.V. Fedotov Technology of Producing of Sodium Hypochlorite from the Concentrate of Reverse Osmosis Systems |
| 202 | I.R. Kuzeev Asphaltenes as Nano Objects Regulating Macrostructure of Solid High-Carbon Substances |
| 203 | M.A.Goncharova, V.V. Simbaev, O.V. Karaseva Optimization of Fine-Grained Concrete Composition in order to Improve the Quality of Units Front Surface |
| 205 | A.O. Korneeva, R.Yu. Saprykin, A.B. Bondarev The Influence of Structure-Forming Factors on the Properties of Polymer Composite Material under Static Loading |
| 206 | A.V. Tyurin, N.Ya. Galimova,A.V. Belyaev Using the Simplex Design Technique for Optimization of Modes of Burnishing with Ball Tools |
| 207 | E.R. Galimov, T.N. Vagizov, A.V. Belyaev Method for Synthesis of Retro-Reflective Coatings with Specified Optical Properties |
| 208 | V.L. Fedyaev, E.R. Galimov, N.Ya. Galimova Theoretical Description of Electrophysical Properties of Syntactic Carbon Foams |
| 209 | A.V. Smirnov, S.G. Ponomarev, V.V. Rybalchenko Dense Packing of Poly-Fractional Powder of Ceramic Materials |
| 210 | E.A. Trofimov, O.V. Samoilova, E.R. Vakhitova Thermodynamic Assessment of the Na–Cu and Na–K Binary Systems |
| 211 | I.V. Starostina The Through-Dyed Autoclaved Silicate Concretes with the Use of Thermally Activated Iron Ore Raw Materials Refinement Tailings |
| 212 | M. Bruyako, L. Grigoryeva Ecologically Safe Composite Building Materials Based on Cellulose-Containing Solid Household Waste |
| 213 | S.A. Tipalin, M.A. Petrov, N.F.Shpunkin To the Influence of the Deformation Speed on Hardening Process during the Cold Sheet Forming |
| 214 | Yu. Bakhracheva Combined Methods of Laser Processing of Steel |
| 216 | A.D. Ahmetov, M.O. Sklyar, R.S. Korsmik, I.A. Tsibulskiy Features of the Structure Formation at Laser and Laser-Arc Deposition from Aluminum Wire |
| 218 | V.A. Beregovoi, A.M. Beregovoi Lightweight Ceramic Materials with Increased Strength Based on Microporous Silicates |
| 220 | E.N. Gryadunova, R.N. Polyakov, N.V. Tokmakov Photometric Method of Diagnosis of Bearing Units Operating with Hydrocarbon Mixtures |
| 221 | Sh.N. Dzhabbarov, E.I. Pryakhin, A.A. Germanov Research Regarding Heat Treatment Influence on Properties of Chromic Steel 40H GOST 4543-71(DIN 41Cr4 GB 40Cr ASTM 5140) with Quenching in Polymer Solution with Purpose of Matching Tubing Pipes which Used in Oil and Gas Extraction |
| 222 | M.A. Filippov, E.I. Korzunova, M.V. Tyumkova Engineering Method for Analysis of the Ability to Strain-Hardening of Steels |
| 224 | A.M. Rekov Strain State During Rolling of Aluminum Samples |
| 225 | E. Khairova, S. Vlasova Investigation of the Usage of the Opportunity of the Dinur OJSC Scrap in the Packing Glass Manufacture |
| 226 | S.A. Alekseev, A.S. Dmitriev, I.A. Mikhailova New Functional Materials for Energy Applications Based on Hybrid Graphene Nanocomposites |
| 227 | Петров М.А., Эльдиб И.С.А. Исследование процесса 3D-сканирования изделий и создание виртуальных копий изделий для оценки качества внутри производственных линий |
| 228 | E.B. Kolmachikhina, E.A. Ryzhkova, D.V. Dmitrieva Influence of Zinc Sulfide Wetting in Surfactants Presence on Leaching Parameters |
| 229 | A. Stolbovsky, E. Farafontova Statistical Analysis Method of the Grain Structure of Nanostructured Single Phase Metal Materials Processed by High-Pressure Torsion |
| 230 | V.G. Shmorgun, A.I. Bogdanov, A.O. Taube Layered Ni-Cr-Al Coatings for Air Tuyeres Protection from the Burnout |
| 231 | V.R. Baraz, S.S. Gerasimov, I.A. Gruzdeva Ion-Plasma Sprayed Coating as a Protective Decorative Coating for Copper-Nickel Alloy |
| 233 | K.D. Naumov, V.G. Lobanov Effect of Lime and Organic Binders on Clay Gold-Bearing Ores Filterability |
| 236 | R.R. Sattarov, T.A. Volkova, I.Z. Gubaydullin Electromagnetic Effect of Eddy Currents in Composites with Conductive Components: Magnetic Field Strengthening and its Simple Analytical Estimation |
| 237 | A.I. Golodnov, Yu.N. Loginov, S.I. Stepanov Numeric Loading Simulation of Titanium Implant Manufactured Using 3D Printing |
| 238 | V.V. Gostishchev, E.D. Kim, E.H. Ri Synthesis of Aluminum-Matrix Alloys with Al-Zr-W by Metallothermy of Oxides |
| 239 | S.Ya. Zhuravlev, V.I. Matyukhin, V.A. Goltsev Investigation of Fuel Briquettes Properties Using Wastes of Mineral Wool Production |
| 242 | V.V. Stepanov, N.F. Timerbaev Composite Railroad Ties Obtained by the Energy Efficient Recycle of Wooden Railroad Ties |
| 234 | M.P. Shalimov, E.B. Votinova Application of the Complete Material Balance Method to Estimate the Transition of Elements in Flux Cored Arc Welding |
| 244 | N. Lukonina, E. Nosova, F. Grechnikov The Effect of Annealing on Mechanical Properties, the Number of Fluidity and the Size of Coherent Scattering Regions in Amg1 Amg5 and Amg6 Alloys |
| 247 | V.G. Gusev, A.A. Fomin, A.R. Sadrtdinov Adaptation of the Methodology of Designing Cylindrical Milling Processes to the Profile Milling Processes |
| 248 | A.A. Fomin, V.G. Gusev, Z.G. Sattarova Geometrical Errors of Surfaces Milled with Convex and Concave Profile Tools |
| 249 | D.B. Prosvirnikov, R.G. Safin, S.R. Zakirov Microcrystalline Cellulose Based on Cellulose Containing Raw Material Modified by Steam Explosion Treatment |
| 250 | P.V. Shalamov, I.D. Cherepkov, V.L. Kulygin Strength of a Threaded Joint on Cut in Holes with Flanges Formed by a Rotating Punch in Thin-Sheet Work-pieces |
| 251 | S.N. Chebotarev, V.A. Irkha, Adnan A.A. Mohamed Low-Energy Ion Technique for Semiconductor Surface Preparation |
| 252 | A.I. Romantsov, M.A. Fedorov, M.A. Ivanov Thermal Cycles and Peculiar Properties of Austenite Decomposition when Laser-Hybrid Welding Steel of K60 Strength Class |
| 253 | M.A. Ivanov, P.A. Danilkin, V.D. Kvashnin Anticorrosion Protection of Welded Joints of Oil Pipelines |
| 255 | V.S. Antipenko, A.A. Stroyev, A.V. Lepeshkin The Influence of Deformation of Tungsten-Based Alloys of Electrodes on Their Thermoemission |
| 256 | V.G. Perederiy, B.G. Gasanov, A.A. Aganov Structurization and Properties of Magnetoplastics Made of Mechanically Activated Amorphous-Crystalline Powder Alloys Based on the Nd-Fe-B System |
| 257 | T.N. Storodubtseva, A.А. Aksomitny, V.A. Saldaev The Study of Soundproofing Properties of Wood Polymer-Sand Composite |
| 258 | D.V. Tuntsev, D.B. Prosvirnikov, R.R. Kozlov Physical and Chemical Properties of Activated Lignocellulose and Its Areas of Application |
| 259 | D.A. Zakharyevich, Yu.N. Kuryleva Isolation of Strontium in Antimonates |
| 260 | O.S. Zueva, Y.K. Mongush, A.O. Makarova Carbon Nanotubes Microenvironment in Ionic Surfactant Water Solutions |
| 261 | E.E. Blokhin, Arustamyan D.A., L.M. Goncharova Functional Characteristics of QD-InAs/GaAs Heterostructures with Potential Barriers AlGaAs and GaAs |
| 262 | D.A. Vinnik, V.E. Zhivulin, S.A. Gudkova Lead Germanate Pb5Ge3O11 Crystal Growth |
| 263 | A. Kuznetsov, A. Bryukhova Video Control Application for Increasing of Materials Spectral Analysis Accuracy |
| 264 | D.N. Gurulev, L.V. Palatkina Relaxation Processes in Ti-Al Composite Material after Rolling |
| 265 | M. Nikhamkin, N. Sazhenkov, D. Samodurov Fatigue Testing Method of Test Coupon and Structurally Equivalent Samples of Carbon Fiber Reinforced Polymer for Gas Turbine Engine Parts and Assemblies |
| 266 | A. Stolbovsky, E. Farafontova Statistical Analysis of Histograms of Grain Size Distribution in Nanostructured Materials Processed by Severe Plastic Deformation |
| 267 | N.L. Zaytsev Improving Methods of Assessment of a Stress State of Structures According to the Results of Coercive Measurements |
| 268 | A.M. Osipov, Yu.V. Bezgans To the Question of Evaluation of the Anode Voltage Drop |
| 269 | O.N. Gruba, I.V. Shmidt, A.E. Gorodkova Influence of the Parameters of Galvanomechanical Chromium Plating on the Coating Quality and Process Productivity |
| 270 | A.V. Sulitsin, R.K. Mysik, S.V. Brusnitsyn Modification of Copper |
| 271 | L.S. Lunin, M.L. Lunina, A.E. Kazakova Growing of AlInGaAsP Solid Solutions on InP Substrates for Photovoltaic Converters |
| 273 | V.V. Berezovskaya, E.A. Merkushkin, Yu.A. Raskovalova Structure Formation in High-Nitrogen Steel during Heat Treatment |
| 276 | V. Krutsilo, A. Samboruk, N. Krotinov Investigation of the Influence of Various Kinds of Hardening on the Surface Structure EI893 |
| Секция 2.2. Инновации и ресурсосбережение в металлургии | |
| 1 | S.V. Gladkovskii, A.I. Potapov, D.R. Salikhyanov Rheological Properties And Substantiation Of Hot Rolling Regimes Of Low- And Medium Carbon Structural Steels |
| 3 | N.А. Shaburova Studying The Peculiarities Of Steel Grinding Balls Structuring |
| 5 | A. Gerasimova, S. Gorbatyuk, V. Devyatiarova Application of Gas-Thermal Coatings on Low-Alloyed Steel Surfaces |
| 6 | G. Shimov, V. Shimov, A. Zavalin A Study of the Influence of the Manufacturing Process Parameters on the Distribution of Residual Stresses in Pipe Walls during Sink Drawing |
| 7 | L.S. Zimin, A.G. Sorokin, A.S. Egiazaryan Advantages in System Approach to Optimal Design of Induction Heating Installations for Aluminum Extrusion Process |
| 8 | L.R. Kharisov, N.N. Safronov, G.N. Safronov Strength of SHS Aluminium Cast Iron from Dispersed Mechanical Engineering Waste |
| 12 | D. Pavlov, A. Bogatov, E. Pavlova The Investigation of Pipe Ends Formation under Reduction Mill Rolling |
| 14 | A.H. Prysiazhnyi, V.V. Kukhar, E.Yu. Balalayeva Method for Determining the Optimum Counter-Flexing Force of Working Rolls during Sheet Rolling |
| 16 | Е.А. Чекалова, В.В. Довольнова Инновационная технология механической обработки с путем применения ионизированной среды |
| 17 | Т.В. Марченко Повышение долговечности режущего инструмента в промышленном производстве |
| 18 | Е.А. Чекалова, А.С. Твердохлебов Повышение износостойкости сложнопрофильного инструмента в машиностроении |
| 21 | G.L. Baranov The influence of the hardening curve profile on the drawing force of a bar |
| 23 | Ye.S. Abdrakhmanov, P.O. Bykov, A.V. Bogomolov Thermal Capacity of Enriched Fuel Briquets Produced from the Fine of Ekibastuz Coal |
| 24 | I.I. Barankova, U.V. Mikhailova, O.B. Kalugina Induction Heating Technology for Steel Wire Processing |
| 25 | Yu.N. Loginov, N.А. Babailov The Improvement of the Briquetting Press Rolls |
| 26 | A.S. Bilgenov, Yu. Kapelyushin, P.A. Gamov Statistical Analysis of Metal Particles Forming during Reduction of Oxides with Low Iron Content |
| 27 | A.A. Shoppert, L.M. Karimova, D.V. Zakharyan Novel Method for Comprehensive Processing of Low-Grade Copper Concentrate |
| 29 | K.A. Mirkhaydarova, А.S. Tyusenkov, R.G. Rizvanov Gas Corrosion of Pyrolysis Furnace Coils |
| 30 | V.G. Nekrutov, A.V. Irshin, B.A. Reshetnikov Improvement of Equipment for Knocking out Castings from Molds |
| 31 | L.G. Kolyada, Е.V. Tarasyuk, N.L. Medyanik Accelerated Tests of Protective Properties of Packaging Materials for Cold-Rolled Steel |
| 32 | M.V. Boshnyak, A.R.Galimianov, O.B. Kolmachikhina Evaluation of the Processing Opportunity of Galvanic Production Sludges with Nickel Recovery |
| 33 | T.D. Pol’shina, O.Yu. Makovskaya, V.V. Egorov Synthesis of Fe(III)-Based Inorganic Sorbent and its Application for Arsenic Sorption |
| 34 | M.V. Erpalov, E.A. Kungurov Examination of Hardening Curves Definition Methods in Torsion Test |
| 35 | A.R. Barashev, O.V. Bazhenov, Yu.O. Tarasova Alternative Technology of Nickel-Cadmium Batteries Recycling |
| 36 | G.V. Pachurin, S.M. Shevchenko, M.V. Mukhina Rolled Metal Structure Resource Saving Preparation for Long-Length Hardened Bolt Upsetting |
| 37 | S. Kuptsov, V. Shimov, R. Magomedova Laser-spark Modification of the Surfaces of Structural Materials by the Example of St3 |
| 38 | A.N. Sobolev, A.A. Mirzoev, D.A. Mirzaev Structure and Stability of Intermediate (Fe, Cr)7C3 Carbides |
| 39 | A.V. Verkhovykh, A.A. Mirzoev, D.A. Mirzaev Interaction of Phosphorus with Impurity Atoms in Bcc Iron |
| 40 | Yu.E. Tokach, Yu.K. Rubanov, O.V. Doroganova Extraction of Metals from Wastes of Metallurgical Production |
| 41 | M.A. Mikheenkov, O.Yu. Sheshukov, D.A. Lobanov Slag Technogenic Formations as a Material for the Production of Silicate Products and Pig Iron |
| 44 | A.A. Yusupova, A.A. Bobryshev, A.A. Treschev Development of Sulfur and Silicon Dioxide Activation Method in the Sulfur Concrete Technology |
| 45 | D.A. Zherebtsov, O.N. Gruba, K.R. Smolyakova Effect of Abrasive Tools in Galvanomechanical Treatment on the Roughness of the Deposited Chromium Layer |
| 48 | O.A. Nasibullina, A.G. Gareev, R.G. Rizvanov Investigation of the Hydrogen Stratification of the Metal of the Active Gas Pipeline |
| 50 | Jicai Kuai, D.V. Ardashev, Huali Zhang Research on Generation and Polishing Mechanisms of Nano Grain ?-Fe2O3 in Precision Electrolytic in Process Dressing (ELID) Grinding |
| 51 | R.N. Hasanov, A.S. Valiev, I.R. Kuzeev Development of the Algorithm for Determination of Mechanical Properties of Steel 20 with Different Levels of Cumulative Fatigue Damage with the Application of Compact Samples |
| 52 | I.R. Kuzeev, E.A. Naumkin, S.A. Pankratiev, R.R. Tlyasheva Impact of High-Frequency Vibrations on Metal Items Resistance to Cyclic and Axial Loads |
| 53 | T.V. Kozlova, T.V. Lipkina, S.M. Lipkin Modeling Calculation of the Corrosion Rate of Low Carbon Steel in Heat and Power Systems |
| 54 | D.M. Galimov, D.V. Ardashev, A.A. Dyakonov Methods for Determining the Quality of Galvanic Chromium Coating |
| 56 | V. Deev, E. Prusov, K. Ponomareva Effect of Superheat Melt Treatment on Microstructure and Mechanical Properties of Aluminum Alloys Produced by Lost Foam Casting |
| 57 | O.V. Samoilova, L.A. Makrovets Constructing Isotherms of Oxygen Solubility in the Liquid Metal of the Cu–Na–K–O System |
| 59 | D.A. Baranov, A.A. Parkin, S.S. Zhatkin XN45BMTUBR Alloy Impact of Laser Beam Welding Modes on Micro-structure and Distribution of Alloying Elements in the Seam |
| 60 | D. Pavlov, A. Bogatov, E. Pavlova The Investigation of the Influence of Friction and Roll Calibration on the Pipe Formation during Plug Rolling |
| 61 | A.N. Maznichevsky, Yu.N. Goikhenberg, R.V. Sprikut Influence of Nitrogen and Nitride-Forming Elements on Properties of Boron-Treated Steel |
| 62 | R.E. Rusalev, D.A. Rogozhnikov, S.S. Naboichenko Investigation of Complex Treatment of the Gold-Bearing Antimony Flotation Concentrate |
| 63 | L.G. Znamenskii, O.V. Ivochkina, A.S. Varlamov Accelerated Forming on the Sol-Silicate Binder in Precision Casting |
| 64 | A.N. Dildin, V.Yu. Gerasimov, E.A. Trofimov The Influence of Heat Treatment on the Size of the Carbide Inclusions and Hardness of Multilayer Composite Material ZD-0803 |
| 66 | V.L. Steblyanko, A.P. Ponomarev Features of Steel Tape Deformation-Strength Properties Formation by Plasma-Cavitating Treatment |
| 67 | G. Shimov, A. Bogatov, D. Kovin FEM Simulation of Copper Busbar Pressing on the Continuous Extrusion Line CONFORM |
| 68 | M.P. Kuz’min, V.V. Kondratiev, L.M. Larionov Production of Al–Si Alloys by the Direct Silicon Reduction from the Amorphous Microsilica |
| 69 | V.M. Kolokoltsev , A.S. Savinov , A.S. Tuboltseva Prediction of Temperature Fields in the System Casting and a Damp Sandy-Argillaceous Mold |
| 70 | V.A. Kuznetsov, A.V. Smirnov, D.A. Buvakin The Study of the Characteristics of Metallic Powders after Electroerosion Dispersion |
| 71 | K.D. Naumov, V.G. Lobanov Gold Electroextraction Fundamentals Using Zinc Three-Dimensional Cathode |
| 72 | V.A. Lebedev, A.A. Shoppert Efficient Assessment of Physico-Chemical Properties of the Cryolite Melts for Research on the Improvement of Low-Temperature Aluminum Electrolysis |
| 73 | A.A. Baron, L.V. Palatkina, I.L. Gonik The Investigation of Microhardness of Grey Cast Iron Dendritic Structure |
| 76 | B. Yur'ev, V. Gol'tsev, V. Dudko Development of the Metallurgical Waste Recovery Process |
| 77 | A. Tribunskiy, E. Nosova, M. Tepterev Effect of Manganese and Magnesium Content and Conditions of Annealing on Mechanical Properties and Cracking Formation during Bending of Aluminum Alloy AA3005 |
| 78 | S.E. Polygalov, S.A. Mastugin, E.A. Shadrina To the Problem of Reducing the Amount of Harmful Emissions when Refining Silver |
| 79 | A.V. Volkov, A.S. Malenkov, A.Ia. Shelginsky Resource-Saving System of Heat and Cold Supply in Power Complex of the Metallurgical Plant |
| 85 | B. Yur'ev, V. Dudko, M. Biakova Application of Ecologically Clean Technology to Drying of Iron-Ore Pellets |
| 86 | S.V. Danilov, P.L. Reznik Hot-Rolled Texture of FCC and BCC Metals |
| 87 | V. Deev, E. Prusov, K. Ponomareva Effect of Superheat Melt Treatment on Microstructure and Mechanical Properties of Aluminum Alloys Produced by Lost Foam Casting |
| 89 | Y.V. Yavorovsky, D.O. Romanov , V.G. Khromchenkov Experimental Research of Thermo-Hydraulic Separators and Dispatchers in Heat Supply Systems | Раздел 3. Системы управления и автоматизации технологических процессов и объектов |
| Секция 3.1. Системы и технологии управления | |
| 3 | Соколов В.И., Кроль О.С., Степанова О.Г. Система автоматического управления гидроп-риводом вращательного движения технологи-ческого оборудования |
| 4 | Lazutkin S.L., Lazutkina N.A. Technical Implementation of Portable Control Movement of Manipulator |
| 7 | Lopatin A.G., Brykov B.A., Vent D.P. Development and Study of Control System with Fuzzy Correction of Proportional Part of PID Controller |
| 8 | Valentyn N. Sichkar Fingerprint Identification as Access Control System |
| 10 | Shikhin V.A., Abd Elraheem A.K., Ren J. Real-Time Control of Microgrid via Multi-Agent Approach |
| 11 | Kira V. Chupina, Evgeny V. Kataev, Igor A. Sennikov Robust Control System for Vessel Descent-Rise Device with Heave Compensation Capability |
| 12 | Enin S.S., Omelchenko E.Y., Beliy A.V. Crane Anti-Sway Control System with Sway Angle Feedback |
| 14 | Emaletdinova L.Yu., Kabirova A.N. Development of Neural Network Model of Regulator for Automatic Control System of Technical Object in Absence of Mathematical Model of Object |
| 15 | Shnayder D.A., Barbasova T.A., Lapteva Y.V. Enhancing Blast Furnace Control Efficiency Based on Self-Organizing Kohonen Neural Networks |
| 16 | Kramar V. Equivalent One-Time Model with Structural Invariant of Quantum Circuits of Multivariable Multi-Stage Control System |
| 18 | Baryshnikova O., Terenteva A., Podchasov E. Selecting Most Effective Moving Average Control |
| 26 | Kanaev A.K., Login E.V., Saharova M.A. Simulation Model of Carrier Ethernet Network Operation for Network Reliability Estimation |
| 27 | Aleksander I. Danilushkin, Aleksej P. Mostovoj, Marina A. Maksimova Optimal Control Start-up Modes of Two-section Induction Heaters with Discrete–Distributed Control Actions |
| 31 | Lysyannikov A.V., Lysyannikova N.N., Shram V.G. Automatic Control System of Motor Grader Blade |
| 32 | Korobkin V., Kolodenkova A. Diagnostics of Distributed Information-Management Systems on the Basis of Cognitive and Fuzzy Cognitive Modeling |
| 33 | Vladimir L. Kodkin, Alexandr S. Anikin, Alexandr A. Baldenkov Spectral Analysis of Rotor Currents in Frequency-Controlled Electric Drives |
| 37 | Kuzishchin V.F., Merzlikina E.I., Hoang Van Va Study of Maximal Rapid Response Algorithm Combined with PID-algorithm and Autotuning Module |
| 40 | Obychaiko D.S., Shikhin V.A., George Chrysostomou Reliability Analysis of Cyber-Physical Systems |
| 42 | Logunova O.S, Somova Yu.V., Gladysheva M.M. Sludge Deoiling of Bottom Sediments: Laboratory Installation for Carrying Out Automated Scientific Research |
| 44 | Alexandr N. Neverov, Igor D. Sergeev Contact Magnetostrictive Pickup of Amplitudes of Displacement |
| 48 | Aleksey V. Kudryashov, Elena S. Galishheva, Alisa S. Kalinina Lighting Control Using DALI Interface |
| 49 | Georgi M. Martinov, Nikolay V. Kozak, Ramil A. Nezhmetdinov Approach in Implementing of Logical Task for Numerical Control on Basis of Concept "Industry 4.0" |
| 50 | Khastsaev B.D. Study of Possibilities of Structural-Iterative Method to Design Invariant Converters Impedance Parameters |
| 51 | Vladimir V. Bulaev Adaptive Correction of Open-Loop Control for Linear Dynamical Systems |
| 52 | Demyanov D.N. Analytical Synthesis of External Perturbation Observer for Bilinear Dynamic System |
| 53 | Eremenko Y.I., Glushchenko A.I., Fomin A.V. Effectiveness Study of PI-controller Parameters Adjustment to Reject Disturbances Acting on Continuous Billet-Heating Furnace |
| 55 | Anna Pashkovskaya, Nikita Berezhansky, Dmitry Bylinkin Development of the Replacement Time Optimization Methodology of Equipment for Petrol Garages with Accounting for Its Physical Deterioration and Obsolescence |
| 56 | Taran V.N., Detistov V.A. Optimal Drone Control based on Predictive Model |
| 57 | Liliya I. Martinova, Sergey V. Sokolov, Aleksandr I. Obukhov Practical Aspects of Ensuring Accuracy of Machining on CNC Machine Tools within Framework of "Smart Manufacturing" |
| 58 | Andrey F. Shorikov, Alexandert Y. Goranov About One Adaptive Correсtion of Optimal Open-Loop Control for Spacecraft Rendezvous |
| 60 | Andreev S.M., Parsunkin B.N., Savinov A.S. Evaluation of Constraints Influence on Optimal Control of Billet Heating Before Rolling |
| 64 | Shaykhutdinov D., Nuri Narakidze Powder Ferromagnets Magnetic Properties Testing for Mechatronic Drives Production Control System |
| 68 | Savin S. Dynamic Estimation of Model Parameters for In-Pipe Walking Robots |
| 69 | Savin S. Parameter Optimization for Walking Patterns and the Geometry of In-Pipe Robots |
| 70 | Malchikov A., Yatsun A., Yatsun S., Savin S. Study of the Characteristics of Bipedal Walking Robot Actuators |
| 73 | Nikishechkin P.A., Chervonnova N.Yu., Nikich A.N. Approach to Development of Specialized Terminals for Equipment Control on the Basis of Shared Memory Mechanism |
| 74 | Anatoly A. Anisimov Synthesizing Robust Control Systems for Mechatronic Objects with Digital State Controllers and Observers |
| 78 | Larisa G. Kopylova, Sergey V. Tararykin Specific Features of Implementing Digital Selectively Invariant Electromechanical Systems |
| 85 | Kobzev A., Monakhov Yu., Lekareva A. Synthesis of Artificial Intelligence Based Adaptive Controllers for Dynamic Objects |
| 86 | Eremin E.L., Chepak L.V. Compound Controller for One-Class of Non-Affine Plants with Control and Status Lags |
| 89 | Liudmila Denisova, Vitalii Meshcheryakov Development of Self-Tuning Control System with Fuzzy Compensation of Steady-State Error |
| 93 | Glushkin E.Ya., Kochetkov V.P., Kolovsky A.V. Application of Square Formulas in the Problems of Research of Automatic Control Systems |
| 97 | Lenar A. Galiullin, Asgat H. Sanakulov Simulation Model for Internal Combustion Engines Diagnostic |
| 98 | Kubil V.N., Mokhov V.A., Grinchenkov D.V. Multi-Objective Ant Colony Optimization for Multi-Depot Heterogenous Vehicle Routing Problem |
| 99 | Kotenev V.I., Elkin D.A., Osipov V.S. Automatic Control System of Load Bus Reactive Factor |
| 103 | Aleksandr B. Ljubimov, Roman L. Pushkov, Svetlana V. Evstafieva Approach to Build a Universal Communication Protocol for Equipment of Different Manufacturers |
| 109 | Ismagilov F., Vavilov V., Gusakov D. Hybrid Magnetic Core for Perspective Supply System of the Aircraft |
| 113 | Sosnovskiy N.G., Popov D.N., Siukhin M.V. Sensitivity of Dynamic Characteristics of Electrohydraulic Servo Drive |
| 119 | Morokina G.S., Umbetov Umirbek, Khu Ven-Tsen Design Program for Testing Systems with Distribution of Resources |
| 120 | Khomyakov A.V., Kravchenko O.A. Algorithmization in Compensation Control of Reactive Power Enterprises |
| 121 | Chenfeng Yao, Stanislav S. Voronin A Simple Model of Typical Conveyor System with DC Gear Motor |
| 122 | Chenfeng Yao, Stanislav S. Voronin The kinematic analysis of the SCARA on MATLAB |
| 123 | Zhou Jiateng, Ekaterina A. Gartlib Mechatronic System of Main Electric Drive of Hot Plate Mill |
| 124 | Yakimov I.A., Gasiyarov V.R. The Improvement of Operational Efficiency of High Power Electric Arc Furnace due to Electrical Equipment |
| 125 | Yakimov I.A., Gasiyarova O.A. The Energy-Efficient Control of the Electrical Regime of High-Power Electric Arc Furnaces: the Case of EAF-180 MMK, PJSC |
| Секция 3.2. Промышленные мехатронные системы и робототехника | |
| 1 | Khmara V.V., Kabyshev A.M., Lobotskiy Yu.G. Optimization of Control for Pneumatic Container Transport System |
| 2 | Voinov I.V., Telegin A.I., Timofeev D.N. Maxima-Code For Derivation of Dynamic Reactions and Generalized Driving Forces in Joints of Robotic Manipulators |
| 3 | Ebrahim Najafi Kajabad Detection of Vehicle and Brake Light Based on Cascade and HSV Algorithm in Autonomous Vehicle |
| 4 | Voinov I.V., Kazantsev A.M., Nosikov M.V. Robot-Manipulator MR-48 for Nuclear Industry |
| 5 | Munasypov R.A., Tselischev V.A., Tselishchev O.V. Pneumatic Drive Employment in Adaptive Suspension of Gyrostabilized Transport Platforms for NC Machining Centers Service |
| 6 | M. Rachkov, V. Bebenin Automatic Two-Stage Vacuum Gripper System |
| 7 | Nikolaev A.A., Tulupov P.G., Zarutskaya Zh.N. Features of Electric Mode Control in Shaft Electric Arc Furnaces and Electric Arc Furnaces Equipped with the Consteel System |
| 8 | Vladimir V. Tyutikov Simplifying Control units During Synthesis of ACS |
| 12 | Bobyr M.V., Dorodnykh A.A., Yakushev A.S. Analysis of Fuzzy Models of Implication in the Task of Controlling a Mobile Robot |
| 13 | Bobyr M.V., Kulabukhov S.A., Sorokoletova A.V. Yakushev A.S. Fuzzy Model for Capturing Moving Object with Pneumatic Mechanisms |
| 15 | Belonozhko P.P. Proper Inertial Motion of Robotic Space Module. Reduced System Dynamics |
| 17 | Vartanov M.V., Mishchenko R.S., Petrov V.K. Experimental Study Of Contact States In The Zone Of Conjugation Using Robotic Assembly Of Precision Cylindrical Joints |
| 25 | Lapikov A., Masyuk V. Approach to Solution of Inverse Problem for Multisectional Parallel Mechanisms |
| 26 | Olga M. Ogorodnikova, Ivan M. Pronychev, Alexey I. Ogorodnikov Studying Human Motion to Adjust Robot-Exoskeleton Control System |
| 27 | Mantserov S.A., Ilichev K.V. Group Robotic Platform Based on Mechanisms of Swarm Intelligence |
| 29 | Yurasova E.V., Volosnikov A.S. Expanding Functionality of “Angle-Parameter-Code” Measuring Transducers |
| Секция 3.3. Электроэнергетические системы и возобновляемые источники энергии | |
| 1 | Baidildina Aizhan Process Automation of Autonomous Object Power Supply System Using Smart Technologies |
| 3 | Faida Е.L., Sivkova А.P, Nikonova Т.Yu. To the Problem of Building the Self-Adaptive System of Electric Domestic Heating |
| 4 | Mikhail P.P. Symmetric 14-pole as Element of Electrical Energy Transmission |
| 5 | Boris N. Abramovich, Yuriy A. Sychev, Roman Yu. Zimin Selection of Shunt Active Filter Main Parameters in Conditions of Centralized and Distributed Power Supply Systems |
| 7 | Sharafeev T.R., Osokin V.Ju., Kulikov A.L. Cyber-Security Problems in Smart Grid |
| 8 | Kurnyshev B.S., Solomanichev M.A., Staroverov B.A. Conversion of Renewable Vacuum Energy |
| 9 | Yuri N. Bulatov, Andrey V. Kryukov, Grigory O. Arsentiev Intelligent Electrical Networks Based on Controlled Energy Routers |
| 10 | Ryzhkova E.N., Mladzievskiy E.P., Tsyruk S.A. Resistive Neutral Grounding Device with Increased Thermal Withstand Capability |
| 12 | Kulikov A.L., Osokin V.Ju., Obalin M.D. Improving Accuracy the Fault Location on Transmission Line 6-35 kV for Double Earth Fault |
| 13 | Telegin V.V., Morozova A.V. Modeling and Calculation of Parameters of Autonomous Electrogenerating Complexes |
| 16 | Repkina N.G., Repkin D.A., Levin M.N. Structural Synthesis of System of Remote Interrogation of Metering Devices |
| 17 | Pleshkova T.A., Pushkov A.P., Repkina N.G. Dynamic Stability of Synchronous Turbogenerators with Longitudinally-Transverse Excitation |
| 18 | Sheryazov S.K., Doskenov A.H. Increase of Effectiveness of System of Solar Heat Supply |
| 19 | Sheryazov S.K., Ptashkina-Girina O.S., Guseva O.A. Renewable Low-potential Thermal Energy Investigation of Water Bodies |
| 20 | Bezdushniy D.I., Sharafeev T.R., Vukolov V.Ju. Information Analysis of Relay Protection Operation |
| 22 | Yablokov A., Filatova G., Timofeev A. Research of Methods for Fault Location Determination Using Signals from Digital Current and Voltage Transformers |
| 24 | Gracheva E. I., Naumov O.V. Probabilistic Forecasting Changes In Magnitude Of Insulation Resistance Of Line Cable And Wire Workshop Networks |
| 27 | Shilin A., Shilin A., Dementyev S. Smart Towers of Overhead Lines of Active-Adaptive Power Grid: Concept, Implementation, Prospects |
| 30 | Serebryakov A.S., Osokin V.L., Bezdushniy D.I. Active and Inactive Power in AC Circuits with Controlled Key Elements |
| 37 | Kovalenko D.V., Kisselyov B.Yu., Ivanova E.V. Calculation of Resonant Modes for Power Supply Systems and Development of Measures on Higher Harmonics Filtering |
| 38 | Pavel V. Ilyushin, Andrew V. Pazderin Requirements for Power Stations Islanding Automation |
| 39 | Biryulin V.I., Gorlov A.N., Kudelina D.V. Method for Cable Lines Insulation Monitoring |
| 40 | Alexander M. Ershov, Galimyan S. Valeev, Rustam G. Valeev Logical Signs Characterizing Modes Breaks Phase and Neutrals Wires of Overhead Line of 380 V Electrical Network |
| 42 | Zvada P., Pitko Ju. Analysis of the Use of Synchronization Methods in Intelligent Electronic Devices |
| 45 | Biryulin V.I., Gorlov A.N., Kudelina D.V.Calculation of Cable Lines Insulation Heating with the Account of High Harmonics Currents |
| 46 | Kubarkov Y., Alehin R. Application of Adaptive PSO and GA algorithms for Voltage Optimization and Reduction of Power Loss |
| 47 | Ershov A.M., Khlopova A.V., Sidorov A.I. Voltage Changes in Case of 6-10 kV Overhead Line Phase Wire Breakage in 6-10/0.38 kV Electic Network |
| 49 | Gandzha S., Kiessh I., Aminov D. Development of Engineering Technique for Calculating Magnet Systems with Permanent Magnets |
| 50 | Gandzha S., Kiessh I. Selection of Winding Commutation for Axial Gap Machines with any Phases |
| 52 | Muntyanov S.N., Volovich G.I., Yakovlev V.A. AC Digital Voltmeter Error Caused by Amplitude Quantization |
| 53 | Dolgikh N.N., Kovalenko D.V., Faifer L.A. Calculation of Incidental Losses of Electric Power under Non-Sinusoidal Modes with Allowance for Actual Heating of Conducting Parts |
| 54 | Dolgikh N.N., Satpaev D.S., Faifer L.A. Analysis of Incidental Power Losses from Interharmonics Based on Wavelet Transform |
| 56 | Osipov D.S., Satpaev D.S., Kisselyov B.Yu. Analysis of Single Phase-to-Ground Fault in Mixed Neutral Ground Systems Using Wavelet Transform |
| 59 | Sandalov V.M., Romanov K.V. Device of Autonomous Power Supply |
| 60 | Smolentsev N.I., Voinov I.V., Sirekanyan V.V. Electromechanic Energy Storage. Development and Research Investigation |
| 62 | Iuliia V. Chernenko Effect Of Switchgear Failures In Calculations Of Structural Reliability Of Power Supply Circuits At Industrial Facilities |
| 64 | Platonova E.V., Chistyakov G.N. Cluster Analysis of Geomagnetic Disturbances Impact on Reliability of Microprocessor Protection |
| 67 | Krivoshein I.L., Suslov Е.А. Improvement of Determination Accuracy of Direction Search of Single-Phase Earth Fault |
| 68 | Evgeniya A. Panova, Artem T. Nasibullin Development of Algorithm for Adaptive Relay Protection of Autotransformer of Substation Hub Industrial Supply |
| 69 | Serkov S.A., Rumyantsev M.Y., Gadzhiev D.K. Calculation of Steam Turbine for Autonomous Small-Capacity Power Plant on Low-Reactive Fuel |
| 71 | Sologubov A.Yu., Kirpichnikova I.M. Approach to Accounting of Non-Linear Properties By Example of Electric Drive with DC Motor Controlled Type Inverter H-bridge |
| 73 | Kovernikova L.I., Luong Van Chung, Fedchishin V.V. Modeling Non-Linear Load Currents by Mixture Distribution Separation |
| 74 | Shuin V., Filatova G., Vorobeva E. Development of Single-Phase Earth Fault Location Algorithms Using Cable Line Simulation Models |
| 75 | Rakhmatullina G.E. Use of Reactive Currents for Melting Ice on Overhead Transmission Lines of 10kV |
| 78 | Loskutov A., Pelevin P. Pattern Recognition Methods Application to Power Systems Protection and Control |
| 79 | Bessolitsyn A.V., Golgovskikh A.V., Novikov A.V. Estimation of Possibility to Use Electromagnetic Relays at Frequencies Below Industrial One |
| 80 | Cheremisin V.T., Erbes V.V., Komyakov A.A. Development of Device for Monitoring of Energy Efficiency of Production Processes at Enterprises |
| 81 | Nagay I.V., Nagay V.I., Kireev P.S. Increasing Sensitivity of Backup Protection of Transit Overhead Lines with Branches |
| 82 | Kulaev I., Kubarkov Y. Regulation of Voltage and Optimization of Power Losses in Active-Adaptive Networks |
| 86 | Nadtoka I.I., Vialkova S.A. Transformation of Cloud Amount into Illumination based on Algorithm of Fuzzy Clustering in Speculation of Energy Consumption |
| 88 | Golov V., Kormilicyn D. Oscillatory Stability Regions of Electrical Power System with Controlled Extra-High Voltage Transmission Line |
| 90 | Fomin I., Makhianova N., Belikov R. Remote Monitoring of Circuit Breakers in Partitioned Power Line |
| 91 | Andreev A.A., Vozmilov A.G., Kalmakov V.A. Results of Experimental Study of System Maintaining Battery Optimal Temperature |
| 93 | Petrov A.V., Kostyukov D.A., Zhukov M.V. Investigation of Error of Express Estimation of Total Harmonic Distortion Current and Voltage with Frequency Deviation in Electric Network |
| 94 | Kononov Yu.G., Rybasova O.S., Sidirov K.A. Identification of Overhead-Line Parameters from PMU Data with Compensation of Systematic Measurement Errors |
| 98 | Veselovskaya E.V., Tkachenko D.O. Increasing the Reliability of Operating Thermal Power Complexes by using New Technologies in Water Treatment Processes |
| 102 | Malafeev A.V., Tremasov M.A. Method for Сalculating Torque-Rate Characteristics of Feed Pump in Pumping, Turbining and Return Flow Mode |
| 104 | Martyanov A.S., Troickiy A.O., Korobatov D.V. Performance Assessment of Perturbation and Observation Algorithm for Wind Turbine |
| 105 | Goman V., Fedoreev S. Experimental Study of Moveable Contact Joint Characteristics in Power-Distribution Equipment |
| 106 | Aleksey A. Kuvshinov, Aleksey N. Chernenko, Vera V. Vakhnina Peculiarities Of Power Transit By Overhead Lines Under Conditions Of Geomagnetic Disturbances |
| 107 | Aleksey A. Kuvshinov, Vera V. Vakhnina, Dmitry A. Kretov Natural Power And Transmission Capacity Of Compensated Distribution Line With Losses |
| 110 | Kolosok I., Gurina L. Wavelet Analysis of PMU Measurements for Identification of Cyber Attacks on TCMS |
| 111 | Kulikov A.L., Sharygin M.V., Voroshilov A.A. Method of Reducing Technical Losses of Electric Power in Transformer Groups by Means of Automatic Switching-off of Transformers |
| 113 | Vadim Z. Manusov, Nasrullo Khasanzoda, Lola Sh. Atabaeva Two-Way Energy Flow Optimization Based on Smart Grid Concept |
| 114 | Shepelev A.O., Petrova E.V., Sidorov O.A. Consideration of Active Resistances Temperature Dependency of Power Transformers When Calculating Power Losses in Grids |
| 116 | Mitrofanov S.V., Baykasenov D.K., Suleev M.A. Сomplex System of Protection of Autonomous Solar Power Plant with Sun-Tracking System |
| 120 | Mitrofanov S.V., Agapov V.A. Substantiation of Using DC transmission with Developing Mathematical Model in Environment Matlab |
| 122 | Kozhevnikov A., Moskalenko A. Choosing Gas Turbine Inlet Temperature for Cyclic Operation |
| 123 | Toropov A.S., Tulikov A.N., Bayshev A.V. Efficiency of Using Solar Electric Panels with Grid-Tied Inverter for Public Buildings |
| 124 | Vadim Z. Manusov, Dmitry V. Orlov Diagnostics of Current Technical State of Transformer Equipment Using the Analytic Hierarchy Process |
| 125 | Bukhmirov V.V., Sadchikov A.V., Kokarev N.F. Increase in Efficiency of Thermophilic Operating Regime of Biogas Plant |
| 127 | Topolskiy D.V., Yumagulov N.I., Galiyev A.L. Development of Technical Solutions for Digital Substations Using Ddigital Instrument Combined Current and Voltage Transformers |
| 129 | Burianina N., Lesnykh E., Suslov K. Principles of Current Protection Based on Three Instantaneous-Value Samples |
| 133 | Sergei V. Aliukov, Li Minghui, Ma Jie, Wang Shixiao Features of Operation of Wind Power Plants in the Arctic and Remote Regions with Identification of Conditions of Increase of Efficiency of their Work |
| 134 | Andrey E. Shchelkonogov, Ke Haishan, Guo Shiqi, Cao Yuxuan Methods of Integral-Matrix Analysis of Hydrogen Energy Development Strategies |
| 135 | Basmanov V.G., Kalinina E.A, Kholmanskikh V.M. Selecting Optimum Stage Switching Interval for Capacitor Unit as Way to Increase Efficiency of Reactive Power Regulation |
| 136 | Aleksandra V. Varganova, Maksim M. Lygin, Vadim R. Khramshin Fuel Mix Optimization of Utility Boilers of Industrial Power Stations |
| 137 | Ozhegov A.N., Derendjaeva L.V., Zakalata A.A. Network Reduction in Calculation of Oscillatory Characteristics of Branching Point Resistor of Electric Loads at Industrial Enterprise |
| 139 | Burkov V.N., Loginovskiy O.V., Dranko O.I., Hollay A.V. The Mechanisms of Smart Management for Industrial Enterprises |
| 140 | Panferov S.V., Gelrud Y.D., Panferov V.I., Loginovsky O.V. To the Solution of the Energy Saving Problem of Industrial Buildings |
| 141 | Loginovskiy O.V., Kulikov G.G., Rizvanov K.A. Methodological and Information Technological Aspect of Business Intelligence for Production Systems |
| Секция 3.4. Силовая электроника, электрические машины и электроприводы | |
| 1 | Zheltov A.S., Bychkov A.E., Kachalov A.V. Reduction of Dynamics Load in Interconnected Electric Drives |
| 2 | Boris N. Abramovich, Yuriy A. Sychev, Pavel A. Kuznetsov Mathematical Modelling of High-Frequency Electrical Motors with Harmonic Elimination Filters for Technological Complexes |
| 3 | Potapov L.A., Maklakov V.P. Modeling of Surface Effects in Massive Rotors of Electromagnetic Brakes |
| 6 | Potapov L.A., Averchenkov V.I., Butarev I.Y. Modeling Electromagnetic Processes in Magnetоelectric Dampers with Disk Non-Magnetic Rotors |
| 7 | Mytsyk G.S, Myo Min Thant, Hlaing Min Oo Informational and Methodological Support for Construction of AC Load Electronic Simulators |
| 8 | Tikhonova O., Malygin I., Plastun A. Calculation of Inductive Resistances of Induction Motor with Ring Windings by “ANSYS Maxwell” |
| 9 | Mytsyk G.S, Tin Aung Zaw Issue of Structural-Parametric Optimization of Fed-Converted Generators |
| 10 | Laletin V.I., Malyshev E.N., Prismotrov N.I. Study of Gear Ratio Influence of Reducer on Characteristics of Discrete Electric Drive |
| 11 | Strizhkov I.G., Chesnyuk E.N., Oskin S.V. Method for Calculating Asynchronous Motor Slip in Tasks of Electric Drive |
| 13 | Veniamin F. Samoseiko, Aleksandr V. Saushev Electromagnetic Torque of Reluctance Machines with Star-Shaped Stator and Rotor in the Context of Polyharmonic Current in Winding |
| 14 | Konesev S.G., Khazieva R.N., Bochkareva T.A. Mathematical Modeling of Inverter with a Hybrid Resonant Circuit Operation Modes |
| 15 | Denisov V., Tretyakova M. Positional Asynchronous Electric Drive with Vector Control and Non-linear Correction |
| 16 | Kruglova T., Yaroshenko I., Rabotalov N. Cyber-physical System of Intelligent Diagnosis of Generator Winding Insulation |
| 17 | Sergei G. Voronin, Dmitry A. Kurnosov, Pavel O. Shaburov Synthesis of Phase Currents of Optimal Form of Synchronous Motor with Permanent Magnets |
| 18 | Barakin N.S., Vanurin V.N., Bogatyrev N.I. Features of Calculation of Asynchronous Generator with Autotransformer Wye-Connected Stator Winding |
| 19 | Nikolaev A.A., Gilemov I.G., Denisevich A.S. Analysis of Influence of Frequency Converters with Active Rectifiers on the Power Quality in Internal Power Supply Systems of Industrial Enterprises |
| 20 | Семёнов А.С., Егоров А.Н., Федоров О.В. Анализ практики применения высоковольтных преобразователей частоты ACS5000 |
| 21 | Ismagilov F.R., Vavilov V.E., Sayakhov I.F. Analysis of Performance of Disc-Type High-Speed Generators Design with PMs |
| 22 | Krasovsky A., Sobolev V., Solovev V. Output Power Control Switched Reluctance Drive For Automotive Applications |
| 23 | Gizatullin F.A., Khakimyanov M.I., Khusainov F.F. Technological Parameters Influence on Energy Intensity of Oil Wells Pumps |
| 24 | Flur R. Ismagilov, Vyacheslav Ye. Vavilov, Valentina V. Ayguzina Genetic Algorithms for Electrical Machine Optimal Design |
| 25 | Glushchenko A.I., Petrov V.A., Eremenko Y.I. On Neural Tuner Development to Decrease Instantaneous Output Torque Oscillations for Rolling Mill Drive |
| 26 | Bolshenko I., Gumme A., Batishchev D. Control of Electromagnetic Valve Actuators Working Under External Effects of Revolution |
| 27 | Malafeev S.I., Konyashin V.I. Induction Motor Drives for Electric Mining Shovels: Synthesis, Design and Research |
| 28 | Malafeev S.I., Malafeev S.S. Compensation of Voltage Loss in Power Line Mining Enterprise |
| 30 | Yudin V.V., Yudin A.V., Pankratov M.V. Analysis of Processes in Electromagnetic Devices in Case of Non-Sinusoidal Influence |
| 31 | Korobatov D., Martyanov A., Solomin E. Modeling of Switching Control Algorithms over the Power Transistors of Bi-directional Synchronous-Vector Rectifier for Storage Battery Charge |
| 33 | Riabov Ie., Liubarskyi B. Determination of Phase Flux-linkage of Flux Switching Motor with Spatial Magnetic System |
| 34 | Koptjaev E., Popkov E. Direct-Conversion Electric Propulsion System |
| 35 | Pustovetov M.Yu. Method for Taking Into Account of Magnetization Curve Nonlinearity at Variable Frequency of Feeding Voltage |
| 36 | Pyatibratov G.Ya., Altunyan L.L., Danshina A.A. Electromechanical Force Compensation System of Weight Removal of Patient for Rehabilitation by the Medical Simulator |
| 37 | Pyatibratov G.Ya., Danshina A.A., Altunyan L.L. Determination of Actuator and Electric Drives Efficient Parameters of Lifting Devices |
| 39 | Lopatkin N.N. New Implementation of Nearest Vector Selecting Space Vector Control for Three-Phase Multilevel Voltage Source Inverter |
| 40 | Lopatkin N.N. Voltage THD and Integrated Voltage Harmonics Factors of Three-Phase Multilevel Voltage Source Inverter with Nearest Vector Selecting Space Vector Control |
| 41 | Lubov E. Roginskaya, Anton S. Gorbunov Application of Autotransformer Converters of Number of Phases in DC Power Supplies with Increased Energy Parameters |
| 42 | Lubov E. Roginskaya, Anton S. Gorbunov Determination of Installed Power of Autotransformer Phase Number Converters to Improve Electromagnetic Compatibility |
| 43 | Smirnov A.Yu., Zimin A.Yu., Kudryashov D.A. Research on Waveform Pulses on Step Drive Running with Inductor Motor |
| 44 | Strelkov V.F., Andryukhin M.V. Peculiarities of Operation of Radar Antenna Variable Speed Electric Drive |
| 46 | Abdulveleev I.R., Khramshin T.R., Kornilov G.P. Novel Hybrid Cascade H-bridge Active Power Filter with Star Configuration for Nonlinear Powerfull Industrial Loads |
| 48 | Khramshin T.R., Kornilov G.P., Khramshin R.R. A Novel Neutral Point Potential Stabilization Technique for Three-Level Inverter-Fed Direct Torque Control of Synchronous Motor |
| 49 | Ptakh G.K., Yakovenko A.E., Zvezdunov D.A. Switched Reluctance Drive of Draglines ESH 20.90 Main Machinery |
| 50 | Azaliya A. Imanova, Vladislav V. Platonov, Viktor Y. Bespalov Increase of Rolling Mill Electric Drive Precision |
| 51 | Sergey P. Gladyshev, Artyom D. Golykov, Danil А Levkin Electric Circuit of Brushless Motor Electric Drive |
| 52 | Artyom М. Zhuravlev, Nikolay V. Kormilicin, Evgeny S. Khayatov Design of Electric Drives with Improved Mass-Dimensional Indicators |
| 53 | Maksim E. Korzhavin, Nikita I. Naumovich, Evgeny S. Khayatov Energy Saving Electric Drives of Boilers Fans |
| 54 | Artyom A. Gryzlov, Lada A. Doykina, Sergey S. Bukhanov Design of Fast Response Electric Drive |
| 55 | Anatoly T. Tsirkunenko, Sergey S. Bukhanov, Marat A. Ramazanov Increase in Reliability of Frequency Converters of Rolling Mill |
| 57 | Fernando Bento, Jorge O. Estima, Antonio J. Marques Cardoso Performance Evaluation of Three Variable Speed AC Motor Drives under Different Load Profiles |
| 58 | Prakht V., Dmitrievskii V., Kazakbaev V. Theoretical Performance Analysis of Ultra Premium Efficiency PM Assisted Synchronous Reluctance Motor with Ferrite Magnets |
| 59 | Kazakbaev V., Prakht V., Dmitrievskii V. Comparative Assessment of Power Consumption of IE2 Induction and IE5 Synchronous Reluctance Motors in Multistage Centrifugal Pump Application |
| 60 | Andriyanov A.I. Comparative Efficiency Analysis of Non-Linear Dynamics Control for Converters with Unipolar Reversible Modulation Based on Target-Oriented Control |
| 61 | Andriyanov A.I. Calculation of Fixed Points of Desired Dynamic Modes for DC-to-DC Converters |
| 68 | Denis N. Kuimov, Maxim S. Minkin Algorithm of Switching of Phases for Sensorless Management of Process of Movement of Secondary Descrete Part of Electromechanical Converter |
| 70 | Vinogradov K.M., Moskvichev A.V. High-speed Autonomus Generator with Field Regulated Reluctance Machine |
| 72 | Sychev D.A., LIU Lin, GOU Xinyue, MU Shicai Loss Components in Electric Drive of Cold Pilger Mill. Control Law Optimization |
| 73 | Igor V. Bochkarev, Ivan V. Bryakin, Vadim R. Khramshin Control of Operational Condition of Electromagnetic Devices of Automation Systems |
| 74 | Baskov S.N., Litsin K.V., Baskova T.V., Litsina D.Yu., Usatyi D.Yu. Influence of Intermediate Transformers on Energy Performance of High-Voltage AC Drives |
| 75 | Gartlib E.A., Baskova T.V., Gasiyarova O.A. The Use of a Neural Network for Building a Process System “Torque Controller - Synchronous Motor” |
| 76 | Luo ZhiNan, Maklakov A.S. Research of Bridge Crane Hoist Control System with Skew Controller |
| Секция 3.5. Микропроцессорные системы управления и обработка сигналов | |
| 3 | Ryabtsev V.G., Evdokimov A.P., Mudar Almadi Microprocessor Matrix Switcher for Diagnosing Digital Systems on Single Crystal |
| 4 | Shilin A.A., Kuznetsova N.S., Avdeyuk D.N. Intelligent Reflectometer for Monitoring Overhead Power Lines |
| 7 | Lanskikh V.G., Vakhrushev V.Yu., Lanskikh Yu.V. Method of Synthesizing Non-Linear Pseudo-Random Sequence Generator |
| 8 | Lyuminarskaja Е.S., Lyuminarsky I.Е. Theoretical Study of Electrical Contact Dustiness Impact on Transition Resistance |
| 9 | Matantsev A., Urazbakhtina Yu., Nafikova R. Method for Minimizing Semiconductor Gas Sensors Errors Based on Signals Processing with Use of Artificial Neural Network |
| 11 | Varlamov D.B., Savchits A.V. Development of Adaptive Regulator in Instrumental Version |
| 14 | Romashov V.V., Khramov K.K., Doktorov A.N. Experimental Verification of Mathematical Models of Noise Curves of Direct Digital Synthesizer AD9910 |
| 15 | Olonichev V.V., Staroverov B.A., Smirnov M.A. Optimization of Program for Run Time Parametrical Identification for ARM Cortex Processors |
| 16 | Lvovich I.Ya., Preobrazhenskiy A.P., Choporov O.N. Research of Opportunities for Reducing Transmission Errors in Orthogonal Frequency-Division Multiplexing Signals |
| 18 | Glushkin E.Ya., Kochetkov V.P., Kolovsky A.V. Application of Square Formulas in Problems of Research of Automatic Control Systems |
| 19 | Zakasovskaya E., Tarasov V. Recognition of Moving Objects by Intelligent Distributed Information and Measurement System |
| 20 | Polyakov D.A., Pugach V.N., Nikitin K.I. Power Transmission Lines Monitoring System |
| 24 | Kostromitin K.I., Dokuchaev B.N., Skorobogatov A.V. Using Methods of Thermal, Electric, Adapter and Probe Control to Analyze Work of Integral Chips |
| 27 | Kolpakov A.A., Kropotov Yu.A. Optimizing Use of Genetic Algorithms for Computing Graphics Processors for Problem of Zero Bit Vector |
| 28 | Shafik Sh. Khuzyatov, Rustam A. Valiev Software Template Engineering for Utilization System of Associated Petroleum Gas in Gas Turbine Plant |
| 29 | Sadykov M.F., Andreev N.K., Goryachev M.P. Hardware-Software of Device for Technical Condition Control of Engine as Part of Truck Autopilot System |
| Секция 3.6. Моделирование и компьютерные технологии | |
| 2 | Korolkova L., Panfilov A., Mashrabov N. Production Repeat Process Model |
| 4 | Gibadullin R.F., Vershinin I.S., Minyazev R.Sh. Development of Load Balancer and Parallel Database Management Module |
| 6 | Sedykh, D., Gordon M., Efanov D. Computer-Aided Design of Railway Signalling Systems in Russian Federation |
| 16 | Pashkovskiy A.V., Tkachev A.N., Bahvalov U.A. New Standard Elements for Calculating Magnetic Fields of Electromechanical and Magnetic Systems with Permanent Magnets |
| 17 | Дубровин А.Г., Баранов Ю.Н., Трясцин А.П. Разработка модели орбитального движения искусственных спутников земли |
| 22 | Ahmed W. M. A., Fomenkov S.A., Gaevoy S.V. Reducing Approximation Time of Cluster Workload by Using Simplified Hypergamma Distribution |
| 24 | Dmitry B. Borzov, Ilya I. Masyukov, Alexander S. Sizov Planning of Program Placement in Cubic Multiprocessor Systems |
| 28 | Igor V. Anikin, Rinat M. Gazimov Privacy Preserving Data Mining in Terms of DBSCAN Clustering Algorithm in Distributed Systems |
| 31 | Chye E.U., Shein A.B. Method of Solving Nonhomogeneous Differential Equation for Dynamic Systems Modeling |
| 32 | Pashnin S.V. Influence of Casing Design on Temperature Field of Self-Baking Electrode (Sodeberg's Electrode) |
| 35 | Eugenie L. Eremin, Evgeniy A. Shelenok Modeling of Decentralized Combined Control System for 2-DOF Manipulator with Input Constraints |
| 37 | Khludova M. Performance-Reliability Modeling for Long-Running Programs |
| 43 | Shempelev A., Iglin P. On Mathematical Model of Condenser Equipped with Water-Jet Ejector |
| 44 | Shilin A.N., Snitsaruk D.G. Computer Modeling of Optical Schemes for Measuring Profilograms of Shells of Rjyevolution |
| 50 | Серков Н.А., Никуличев И.В., Шлесберг И.С. Имитационное моделирование алгоритмов коррекции первичных отклонений 5 координатного станка с ЧПУ |
| 56 | Muravyova E.A., Sharipov M.I. Comparative Energy Consumption Analysis of Two Types of Booster Pump Station Control Systems |
| 57 | Muravyova E.A., Uspenskaya N.N., Galiaskarova G.R. Software Implementation of Salt Reserves Simulation Model by AnyLogic Software Package |
| 59 | Семёнов А.С., Хубиева В.М., Харитонов Я.С. Математическое моделирование статических и динамических режимов двигателя постоянного тока в пакете программ MATLAB |
| 60 | Orlov S.P., Girin R.V., Uyutova O.Yu. Artificial Neural Network for Technical Diagnostics of Control Systems by Thermography |
| 64 | Korzhakov A.V., Oskin S.V. Investigation of Influence of Pulse Voltage Form on Change of Voltage Gradient of Magnetic Field in Working Zone of Acoustic and Magnetic Device Model |
| 65 | Sergeev Yu.S., Sandalov V.M., Karpov G.E. Developing Model of Switched Reluctance Electric Vibration Drive for Debugging of Executive Body Complicated Movements Control Algorithms |
| 68 | Smagin K.A., Khrenov S.I., Timofeev E.M. Statistical Aspects of Particle Behaviour in Industrial Electrostatic Precipitators |
| 70 | Ukhobotov V.I., Ptashko E.A. Automatic Generation of Fuzzy Rules for Control of Mobile Robot with Track Chassis Based on Numerical Data |
| 72 | Kinsht N., Petrunko N. Various Kinds of Test Influences in Circuit Diagnostic Problem |
| 76 | Shnayder D.A., Kalinina E.A. Data Mining and Model-Predictive Approach for Beneficiation Plant Productivity Increasing |
| 79 | Shchuchkin D., Podbereznaya I., Khoroshev A. Modeling Magnetic Hysteresis in Magnetic Systems of Magnetizing Devices for Flaw Detection in Steel Ropes |
| 92 | Savelov N.S., Grechany S.A., Lebedev I.S. New Approach to Modeling Dynamic Objects |
| 94 | Irina S. Babanova, Boris N. Abramovich, Yuriy A. Sychev Development Of Prediction Models For The Purpose Of Management Of Electric Consumption Modes Of Industrial Enterprises |
| 98 | Tushev S., Sukhovilov B., Sartasov E. Robust Coded Target Recognition in Adverse Light Conditions |
| 101 | Tlyasheva R.R., Gostenova E.A., Kuzeev I.R. Deformation of Industrial Pipelines Under the Influence of Shock Wave |
| 112 | Rykov A., Luppov A., Krasikov M. Identification and Classification of Signal Distortions Based on Wavelet Transform and Neural Networks |
| 114 | Rustem Ayr. Nizamov, Evgenii Yu. Fedorov Layout of Items and Structural Assemblies of Electrical Equipment of UAV |
| 117 | Frid A.I., Vulfin A.M., Berkholts V.V. Architecture of Modular system for Assessing Security of Telemetry Information Transmission System |
| 119 | Bushmeleva K., Uvaysov S., Bushmelev P., Uvaysova A. Detection of Methane Leaks from the Main Gas Pipeline for Remote Sensing with Oblique Laser Beam |
| 122 | Rustam T. Murzakaev, Anatoliy N. Poliakov, Vadim V. Artemev Solution of Kinematics Problem of 5-DOF Manipulator Emitter for Non-Destructive Defectoscopy |
| 123 | Krasinskiy A.Ya., Krasinskaya E.M. Mathematical and Computer Modeling of Dynamics of Manipulators with Geometric Constraints |
| 125 | Kostoglotov A., Lazarenko S., Pugachev I., Kornev A. Analysis of Dynamic Errors in Estimating Parameters of Structurally Uncertain Measurement Processes Based on Quasioptimal Intellectual Algorithms of Combined Maximum Principle |
| 126 | Киншт Н.В. Петрунько Н.Н. Интерпретация интегральной картины частичных разрядов как множества взаимосвязанных процессов |
| 127 | Сизов Ю. А., Ким М. Е. Исследование нестабильности выходного напряжения тяговой аккумуляторной батареи автомобиля при учете реального разброса параметров аккумуляторов по компьютерной модели системы контроля и выравнивания |
| 131 | Lekh I., Taranenko P. Development of Functional Electromechanical 1D Model of Coriolis Flowmeter Measuring Tubes |
| 136 | Sinyavskaya E.D., Shestova E.A. Assessment Adequacy and Updating of Fuzzy Control Models Parameters of Production Facilities |
| 138 | Solodusha S. Amplitudes of Test Signals for Identification of Volterra Kernels |
| 139 | Filaretov V., Kurganov S., Gorshkov K. Cancellation-free Symbolic Analysis of Switched-Capacitor Circuits |
| 141 | Evich L.N., Ostroukh E.N., Panasenko P.A. Methods for Solving Optimization Problems with a Multimodal Objective Function Based on Hybrid Algorithms |
| 142 | Bagoutdinova A.G., Vorontsova V.L. On Application of Conical Tube-in-Tube Helical Coil Heat Exchangers with Variable Bending Radius of Helix |
| 145 | Tyugashev A. On Use of Adaptive Schedules in Semantic Modeling of Real-Time Control Algorithms |
| 146 | Makarovskikh T.A., Panyukov A.V. Resource-Efficient Technologies for Cutting Process |
| 147 | Alexey S. Katasev, Lilia Yu. Emaletdinova, Dina V. Kataseva Neural Network Model for Information Security Incident Forecasting |
| 148 | Alexey S. Katasev, Lilia Yu. Emaletdinova, Dina V. Kataseva Neural Network Spam Filtering Technology |
| 150 | Vikulov E., Denisov O., Meshcheryakov V. Event-Driven Simulation of Server Stations Load Balancing |
| 151 | Kudelin S.P., Inatovich U.V., Bondin A.R. Use of Expert System for Optimization of Technologies of Hot Bar Rolling |
| 159 | Sapozhnikova M.U., Nikonov A.V., Vulfin A.M. Intrusion Detection System Based on Data Mining Technics for Industrial Networks |
| Секция 3.7. Теория и практика динамических измерений | |
| 5 | Andrey N. Serov, Nikolay A. Serov, Ekaterina A. Dolgatcheva Influence of Nonlinearity of ADC Conversion Function on RMS Measurement Error |
| 6 | Grachev N.N., Safonov S.N. Investigation of the Sensitivity and Stability of Transfer Characteristic of Electromechanical Measuring Transducer of Small Values of Velocity Head of Rarefied Gas |
| 8 | Andrey N. Serov, Aleksandr A. Shatokhin, Gennady V. Antipov Method to Reduce the Measurement Error of the Spectrum by the Demodulation Technique |
| 9 | Tanana V.P., Sidikova A.I. Approximate Solution To The Inverse Boundary Value Problem For The Heat Equation |
| 10 | Sergey V. Shalobanov Defect Search In Automatical Control Systems With Depth To Dynamic Block |
| 11 | Shady Sayed, Samer Wagdy, Moutaz Hegazy, Ahmed Badawy Sensitivity Measurements of a Symmetrical and Decoupled Resonant Gyroscope |
| 12 | Gerasimov S., Zhelbakov I. Correlation Analysis of Probing Signals as a Special Case of The Digital Signal Processing Methods in an Ultrasonic Liquid Flow Measurement Applications |
| 19 | Rakhimov N.R., Khakimova A.I. Optoelectronic Information-Measuring Systems for Determining Physical and Chemical Parameters of Oil-Containing Fluids |
| 21 | Shilin A., Petrushkin A., Bukreev V. Method for Measuring Motor Speed Obtained from the Spectral Characteristics of Current Consumption Form |
| 22 | Yumagulov N.I., Galiyev A.L., Topolskaya I.G. Unit for Stabilizing Power of Reference Generator |
| 23 | Solodusha S., Yaparova N. Numerical Solutions of Dynamic Measurement Challenges by Volterra Equations |
| 24 | Limorenko M., Terenteva A., Podchasov E. Development of Systematical Biases Exclusion Methods for Technical Measurements |