industrial engineering
e-mail icie.rus@gmail.com

ICIE-2017 PROGRAMM

    Authors Name/s, papers Title
    Part 1. Research and development of machines and mechanisms
    Section 1.1. Dynamics of machines and working processes
    1A. Epmakova
    Ideal Failure Models of Structures for Analysis by FEM and AFEM
    2М.V. Shakhmatov, Е.А. Usmanova
    Safety Evaluation of Pipelines on the Basis of Probabilistic Approaches
    3A.M. Ulanov , S.A. Bezborodov
    Research of Stress-Strained State of Pipelines Bundle with Damping Support Made of MR Material
    4V.S. Vagin, A.I. Kurochkin, A.A. Karpesh
    Compact Mobile Sinking Hoists Creation Prospects
    5A. Korobko, A. Chernyaev, V. Korobko
    Determination of Basic Dynamic Vibration Frequency at Trapezoid Plates Using Conformal Radius Ratio Interpolation Technique
    6A. Chernyaev
    Improving the Accuracy of Geometric Interpolation for Determining Fundamental Frequency of Parallelogram Plates Vibration
    7W. Al-Tibbi, V. Hristoforova
    Getting Longitudinal-Torsional Elliptically Polarized Oscillations in Liquids through Complex Acoustic Field
    8E.A. Lazarev , M.A. Matculevich, V.E. Lazarev
    Performance Evaluation of Compression-to-Combustion Transition Process in Diesel Engine Cylinder
    9S. Seregin
    Influence of Small Added Mass on Splitting Flexural Frequency Spectrum of Circular Ring with Initial Imperfection of Shape
    10V.N. Ozherelyev, F.N. Kotikov
    Sprouted Potato Tuber Dynamics and Kinematics during Mechanized Planting
    11R. Polyakov
    Interaction of Rolling-Element and Fluid-Film Bearings Dynamic Characteristics in Hybrid Bearings
    12V.L. Zakovorotny, V. P. Lapshin, T.S. Babenko
    Assessing the Regenerative Effect Impact on the Dynamics of De-formation Movements of the Tool During Turning
    13S.V. Seregin
    Influence of Attached Body on the Frequency and Modes Free Vibrations Cylindrical Shells
    15L.V. Plotnikov, B.P. Zhilkin, Yu.M. Brodov
    The Influence of Piston Internal Combustion Engines Intake and Exhaust Systems Configuration on Local Heat Transfer
    17E.P. Plavelsky , R.R. Sharapov
    The Problems of Dynamics of Wheeled Vehicles with Flow Able Building Cargo
    18D.F. Khabarova, A.V. Podzerko, E.K. Spiridonov
    Experimental Investigation of Fluidic Diodes
    19A.R.Ismagilov, E.K.Spiridonov, O.V.Belkina
    Liquid Jet Ejector Efficiency Improvement
    22S.S. Makarov, V.B. Dement’yev, T.M Makhneva
    Mathematical Simulation of Gas-Liquid Flow in Cooling High-Temperature Metal Bodies
    23S.V. Nosenko, V.A. Nosenko , L.L. Kremenetskii
    The Condition of Machined Surface of Titanium Alloy in Dry Grinding
    24A.L. Kartashev, M.A. Kartasheva, A.A. Terekhin
    Mathematical Models of Dynamics Multiphase Flows in Complex Geometric Shape Channels
    25A.L. Kartashev, M.A. Kartasheva, A.A. Terekhin
    Modeling Operating Regimes in Multiphase Flowmeter Flow Path Using CFD Methods
    27A. Sytin, A. Rodichev, V. Tyurin
    Characteristics of Dynamic Analysis of Rotors in Foil Bearings with the Bump Foil
    28 L.V. Plotnikov, S. Bernasconi, Yu.M. Brodov
    The Effects of the Intake Pipe Configuration on Gas Exchange, and Technical and Economic Indicators of Diesel Engine with 21/21 Dimension
    29S.O. Gaponenko , A.E. Kondratiev
    Device for Calibration of Piezoelectric Sensors
    30V. S. Bykador , Zh. E. Bykador (Bronzova)
    Bifurcations of Deep Hole Drilling Process
    31V.L. Zakovorotny, V.E. Gvindjilia
    Influence of Kinematic Perturbations on Shape-generating Movement Trajectory Stability
    33A. Cherniavsky
    Crack Patterns under Mechanical Loading
    34M. N.Nagorkin, V. P.Fyodorov, A.V.Totai
    Features of Waviness’s Formation and Deviations from Roundness of Machine Details Surfaces at Final Machining with Surface Plastic Deformation by Elastic Action Tools
    35I.A. Krivosheev, K.E. Rozhkov, N.B. Simonov
    Complex Diagnostic Index for Technical Condition Assessment for GTE
    36S.B. Sapozhnikov, E.I. Shchurova
    Voxel and Finite Element Analysis Models for Ballistic Impact on Ceramic-polymer Composite Panels
    40N.V. Baidakova,T.N. Orlova
    Usage of Abrasive Grains with Controllable Shapes as Means of Grinding Wheels Operation Stabilization
    41N.V.Baidakova,T.N. Orlova
    Influence of Abrasive Grain Geometrical Characteristics on the Grinding Quality
    42S.A. Kryukov, M.A. Tkach
    Phenomenological Model of Abrasive Tool Components Mixing Process
    43S.A. Kryukov, A.S. Kryukova
    Determining the Parameters of Grinding Wheels Working Surface Profile
    44O.G.Kulik, V.A.Demenkov
    Kinematics and Dynamics of Chip Formation During Grinding
    45O.G.Kulik, V.A.Demenkov
    Management of Kinematic Factors for the Improvement of Deep Grinding Performance
    46O.I. Pushkarev, P.U. Bochkarev, I.V. Bashkirtseva
    Main Regularities of Elastic-Plastic Deformation and Brittle Failure in Micro Volumes of Abrasive Materials under Micro Pressure
    47V.M. Shumyacher, O.I. Pushkarev, A.V. Slavin
    Energy Efficient Technology of Obtaining Advanced Composite Grinding Materials and Tools in "Silicon Carbide – Corundum" System from Aluminium-Containing Residual Products
    48V.M. Shumyacher, P.U. Bochkarev, A.V. Slavin
    Monitoring Operating Parameters of Abrasive Materials
    49N.K. Kuznetsov, V.L. Lapshin, A.V. Eliseev
    Features of Dynamic Damping in Linear Mechanical System with Additional External Excitation
    51V.V. Kirillov, R.D. Shelkhovskoi
    Heat and Mass Transfer in Low-Temperature Gas Generation
    53R.B. Kuskil’din, M.A. Vasilyeva
    Dynamic loads during safety braking of the container with cargo
    55A.N. Davydov, A.V. Smolyaninov
    Identification of Upper Limit of Horizontal Cross Forces Applied to Track Generated at Curved Movement of Freight-Car Truck Equipped with Elastic Side Bearings
    56M.V.Chuveyko, S.V.Nosachev
    Influence of Deformation Effects on Wheeled Systems Dynamics
    57A.N. Gorbenko, N.P. Klimenko, G. Strautmanis
    Influence of Rotor Unbalance Increasing on its Autobalancing Stability
    58V. Chernyshev, O. Fominova
    Dynamic Damping Process Control
    60V.G. Gusev, A.A. Fomin , A.R. Sadrtdinov
    Dynamics of Stock Removal in the Profile Milling Process by the Shaped Tool
    61V.G. Gusev, A.A. Fomin
    Multidimensional Model of Surface Waviness Treated by Shaping Cutter
    64F. Yagodkin, M. Pleshko, A. Prokopov
    Perspective Schemes Equipment Ultra-deep Shafts
    65A.S. Vasiliev
    Efficiency Evaluation of Freight Cars Perspective Draft Gear Coupler
    67M.D. Garipov, R.F. Zinnatullin, V.A.Shayakhmetov
    Numerical Study of the Compressed-Air Atomizer for Spark- ignited Jet Fuel Engine
    70B. Sharoglazov , O. Mashkov
    Estimation of Working Combined Power Plant Cycle Parameters and Indicators Applied to Function Modes Featuring Frequencies Corresponding to External Speed Characteristic
    71A. Sytin, A. Rodichev, A. Babin
    Experimental Study of Foil Gas-Dynamic Bearing Elastic Elements Deformation
    72M.S. Poleshkin, V.S. Sidorenko, S.V. Rakulenko
    Research of Automated Positional Hydrodrive with Hydraulic Control Circuit
    73V.S. Sidorenko, M.S. Poleshkin, D.D. Dymochkin
    The Problem of Optimal Operation Speed of Positional Hydromechanical Drive Systems
    74V.O. Eremeyev, F.S. Peplin, A.V. Tumanin
    Mathematical Model of Dynamics of Air Cushion Vehicle with Ballonet Type Skirt on Water
    75A.P. Khomenko, S.V. Eliseev, A.V.Nikolaev
    Possibilities of Dynamical Condition Control in Technical Systems under Vibration Excitation
    76A.E. Kishalov, K.V. Markina
    Computer-Aided Design of Structural Elements of Modern Turbofan Compressors
    79S. Vasilevykh, V. Buravlev, E. Shelihov
    Method of Mathematical Model Development to Study Vibration Resistance of Non-Rigid Shaft Linear Turning
    80A.A. Prikhodko, A.I. Smelyagin, A.D. Tsybin
    Kinematics of Planetary Mechanisms with Intermittent Motion
    82P. Yu. Grachev, E. V. Strizhakova, A. S. Tabachinskiy
    Starter-Generator Design and Dynamic Processes Simulation for HEVs
    83I.M. Ryabov, K.V. Chernyshov, A.V. Pozdeev
    Vibroprotective and Energetic Properties of Oscillating System Equivalent to Vehicle Suspension with Pendular Regulator on Shock Absorber
    84A.A. Danshina
    Methodology of Practical Determination of Electric Drive for Force Compensating Manipulator
    85A.N. Savkin, K.A. Badikov , A.A. Sedov
    Damage Models and Durability Prediction for Structural Elements of Transport Under Variable Loading
    86A.N. Savkin, M.A. Klimov, A.O. Doluda
    The Automobile Design Element Fatigue Life Modeling Due To Its Dynamic Model
    87A.A. Tumakov, V.I. Grishchenko , A.V. Kozhukhova
    Mathematical Modeling of the Sensor Tilt Membrane Type
    88A.D. Lukyanov, T.S. Onoyko, T.A. Najafabadi
    The Optimization of Processing Conditions when Drilling Deep Holes: Twist Drills
    89I.I. Berezin, A.A.Abyzov
    Probabilistic Modeling of Tracked Vehicle Mover And Ground Interaction
    90G.V. Voronkova, V.A. Pshenickina, S.S. Rekunov
    Statistical Model for Dynamic Analysis of Beams on Stochastic Foundation
    93M.V. Lankin, O.I. Lozin, M.Yu. Lankina
    Magnetization Dynamic Characteristics Models for Hydraulic Drives of Proportional Electromagnets
    95G.S. Khazanovich, A.V. Otrokov, V.G. Chernyh
    Dynamics of Process, Algorithm, and System of Uninterrupted Action Loading Machine Feeding
    96G.S. Khazanovich, E.Yu. Voronova, A.V. Otrokov
    Simulation of Performance Formation Process of Loader with Wedge-like Working Elements as Part of Blast and Bulk Tunneling Complex
    98V. Koltsov, D. Starodubtseva
    Investigation of Traces of Interaction between Flap Wheel and Aluminum Alloy Plain Surface
    99K. Molokov, Y. Domashevskaia
    Estimation of Endurance Limits of Welded Joints by the Criterion of Non-propagating Cracks
    102A.M.Golosov , V.V.Makarov, N.A.Opanasiuk
    Complex Method of Detection Reliable Precursors of Stressed Rock Samples Failure
    106D. Ibragimov, A. Mochalov, Yu. Ilinskiy
    Research Data of Microturbine Nozzles with Outlet Angles Under 9 Degree
    107Yu.Ya. Fershalov, M.Yu Fershalov, A.Yu. Fershalov
    Energy Efficiency of Nozzles for Axial Microturbines
    108A. Babin, D. Shutin, L. Savin
    Modeling of rotor P-controlled position on thrust bearing with fixed inclined pads
    109L.V. Radionova, A.D. Chernyshev, R.A. Lisovskiy
    Interactive Educational System –"Sheet Rolling" Virtual Simulator
    110I.M. Ryabov, K.V. Chernyshov, A.V. Pozdeev
    Vibroprotective and Energetic Properties of Vehicle Suspension with Pendular Damping in a Single-Mass Oscillating System
    112В.В. Елисеев, Т.В. Зиновьева, С.А. Абид
    О теории и методике расчета критических режимов вращения упругих роторов
    113S.V. Majorov, L.A. Savin, A.Y. Koltsov
    Energy-Efficient Trajectories Rotors Supported on Radial Fluid-Film Bearings
    114L.A. Barkov, M.N. Samodurova, E.A. Trofimov
    Computer Simulation of Porous Material Plastic Deformation
    116D.A. Blagodarov, D.D. Grigorian, Y.M. Safonov
    The Approach to Design Control System for the Electric Drive with Flexible Mechanics
    118В.В. Елисеев, В.А. Пискунов
    Динамика и прочность пневмоклапана из композита
    122A.P. Paramonov, M.R. Kadyrov, A.A. Trinchenko
    Research on Influence of the Furnace Chamber Aerodynamics on Ecological Indicators of Boiler Plants (Part 1)
    125A.P. Paramonov, M.R. Kadyrov, A.A. Trinchenko
    Research on Influence of the Furnace Chamber Aerodynamics on Ecological Indicators of Boiler Plants (Part 2)
    124A.A. Yaushev, P.A. Taranenko, V.A. Loginovskiy
    Analysis of influence of mechanical boundary conditions on zero point shift of Coriolis flowmeter
    126М.А. Sosedkova, L.V. Radionova,Т.А. Lisovskaya
    Mathematical Model of Hot Rolling Temperature Parameters
    Section 1.2. Friction, wear and lubrication in machines
    3A. Keropyan, S. Gorbatyuk, A. Gerasimova
    Tribotechnical Aspects of Wheel-Rail System Interaction
    4M.V. Zernin
    Friction Units Durability Estimation Method Based on Friction Surfaces Limiting States Criteria System
    5A.M. Burov, V.F. Danenko, M.V. Ivanov
    On the Use of Powder Alloys for Friction Units
    6S.A. Renev
    The Method of Solving Problems of Strength and Fracture Toughness in CAE-System Using Modified “Birth and Death” Functions
    7P.E. Rodriguez, L.E. Shvartsburg, M.S. Artemyeva
    Methodological Design and Commissioning of an Experimental Stand for the Study of the Spread of Harmful Substances in the Air of Work Areas during the Processing of Metals in Industry
    8V.P. Lapshin, I.A. Turkin
    Modeling Tractive Effort Torque of Wheel in Deformation Movements of Pneumatic Tire Wheel
    10A.N. Bolotov, V.V. Novikov, O.O. Novikova
    Dielectric Criteria of Colloidal Stability of Nanodispersed Ferrofluid Lubricating Oils
    11A.N. Bolotov, I.V. Gorlov, V.V. Novikov
    Nanodispersed Ferrofluid Oil Lubricity Improvement with Processing Methods
    12A. Gritsenko, A. Plaksin, V. Shepelev
    Studuing Lubrication System of Turbocompressor Rotor with Integrated Electronic Control
    13K.E. Kozlov, A.V. Egorov, V.N. Belogusev
    Experimental Evaluation of Chain Transmissions Lubricants Quality Using a New Method Based on Additional Inertia Moment Use
    14A.V. Zhidkov, A.V. Tyutyakin, V.V. Mishin
    Research of Time-Frequency Characteristics of Electrical Resistance Signal of Friction Zone of Hip Joint Endoprosthesis with Metal-Metal Friction Pair
    15O.S. Zhelezkov, S.A. Malakanov, V.V. Semashko
    Prediction of Thread Rolling Tools Wear Resistance
    17K.J. Relmasira, A.Yu. Leonov, P.I. Malenko
    Application of molecular dynamics method for simulation of the process of increasing the diffusion mobility of atoms using vacancy diffusion mechanism
    18A.A. Asheichik, Mohammad Reza Bahrami
    Investigation of Graflon Antifriction Feature under Friction in Seawater
    20Yu. Rozhdestvensky, K. Gavrilov, A. Doikin
    Forced Diesel Piston Tribological Parameters Improvement
    21Yu. Rozhdestvensky, K. Gavrilov, A. Doikin
    Development of Technical Solutions for Forced Diesel Main Tribosystems
    23A.R. Zagretdinov, A.E. Kondratyev, S.O. Gaponenko
    Reliability Increasing Solutions for Multilayer Composite Structures Shock-Acoustic Control
    24V.V. Zelinskiy, E.A.Borisova
    Reducing Wear during Coalescence in Steel-Steel Tribo-Systems by Magnetic Action
    25A.V. Mikhailov, I.A. Korolyov, A.O. Lopatiuk
    Corrosion Stability of Cutting Tool's Material for Exploitation of Peat Deposits
    26V.A. Godlevskiy, V.A. Sandler, R.I. Harlamov
    Application of Electric Methods to Estimate Lubrication Layer Supramolecular organization
    27V.V. Shapovalov, P.V. Kharlamov, S.L. Gorin
    Friction Contact Control in “Wheel – Rail” Locomotive System
    28K.E Borisova, T.N. Ivanova, R.G.Latypov
    Corrosion Stability of Cutting Tool's Material for Exploitation of Peat Deposits
    29N.Yu. Dudareva, N.Kh. Musin
    Feasibility Study on the MAO- and SH-coated Cylinder Liners Application in ICE
    31A.D. Rulevskiy, M.A. Izzatulloev, A.S. Nechaev
    The Method for Calculating Dynamics and Lubrication of the Hydrodynamical Tribosystems in the Piston Machines
    32V.P. Pavlov, V.M. Kudoyarova
    Spline Based Numerical Method for Heat Conduction Nonlinear Problems Solution
    33V.S. Zhernakov, V.P. Pavlov, V.M. Kudoyarova
    Spline-Method for Numerical Calculation of Natural-Vibration Frequency of Beam with Variable Cross-Section
    34E. Zadorozhnaya, S. Sibiryakov, N.Lukovich
    Calculated Estimates for the Thermal State and the Precession Amplitude of the Rotor in the Turbocharger Radial Bearing
    35I. Mukchortov, E. Zadorozhnaya, E. Polyacko
    Transitional Friction Regime Modeling under Boundary Lubrication Conditions
    36E. Zadorozhnaya, I. Levanov, V. Erkin
    Assessing Resource of Internal Combustion Engine Crankshaft Bearing in Consideration of Transient Regime
    37V.A. Kompanets, O.E. Surov
    Idle-Time Corrosive Wear of Hull Plating: A Study
    38A. Minaev, R. Сhizhikov, O. Portnova
    Multifunctional Coatings for Gas-Lubricated Bearings Used in Marine Equipment
    41A. Erulanova, A. Muslimova
    Development of Conceptual Model for Virtualization of Bulk Materials Dispensing Technological Process
    42I.V. Dobrov
    On Kinematics -of Stock Deformation Process during Drawing
    43A.P. Garshin, V.I. Kulik, A.S. Nilov
    Study of Ceramic-Matrix Composites Tribological Properties Paired with Cermet
    44M.A. Skotnikova, N.A. Krylov, A.A. Popov
    Structural and Phase Transformation in Metals at High-Speed Cutting and Tool Wear
    Section 1.3. Design and manufacturing engineering of industrial facilities
    1V.V.Glebov
    Investigation of Effect of Parameters of Electrochemical Processing with Scanning Electrode Tool on Material Removal Rate and Quality of Engineering Products Processing
    2V.I. Korobko, S.Yu. Savin , I.A. Ivlev
    Stability Analysis of Orthotropic Plates By The Form Factor Interpolation Method
    3A. Bulgakov, T. Kruglova
    Intelligent Method for Fault Finding of Electric Drive Based on Wavelet Analysis of its Electrical and Mechanical Parameters
    5V. Sokolov, O. Krol
    Installations Criterion of Deceleration Device in Volumetric Hydraulic Drive
    6А.S. Yanyushkin, D.A. Rychkov
    The Process of Composite Materials Machining Cutting Tools Profiling
    7V.Yu. Antsev, N.A. Vitchuk, V.V. Miroshnikov
    Improvement in Production Process for Pipelines Manufacturing Based on Quality Management Method
    8S.I. Gvozdkova, L.E. Shvartsburg
    Analysis of Sources and Methods for Reducing Noise by Minimizing Vibrations of Engineering Technological Processes
    9N.V. Syreyshchikova, L.A. Semashkо
    Gauges Manufacture Process Planning Automated Control System at an Industrial Enterprise
    10T.N. Ivanova, V.B. Dementyev
    Investigation of Influence of Grinding-machine Spindle Unit Rigidity on the Character of Abrasive Tool Wear
    11S. Shevchenko, A. Mukhovaty, O. Krol
    Gear Clutch with Modified Tooth Profiles
    12P.V. Shalamov, Ju. V. Kazantseva
    Thermal Drilling with Force-Feed Tool
    14Yu. Novoselov, V. Bogutsky, L. Shron
    Patterns of Removing Material in Workpiece - Grinding Wheel Contact Area
    16M.G. Slobodianskii, A.V.(Jr.) Antsupov, A.V. Antsupov
    Providing the Maximum Feasible Service Life of Backup Rolls When Designing Finishing Modes
    17L. Haritonova
    On Neural Modeling of Heat Exchange in Heat Exchangers (Recuperators) with the Systems of Plane-Parallel Impingement Jets for Machine Building and Metallurgical Productions
    19L.E. Shvartsburg, E.V. Butrimova, O.V. Yagolnitser
    Energy Efficiency and Ecological Safety of Shaping Technological Processes
    20A.V. Averchenkov, E.A. Leonov, D.V. Orekhov
    Automation of Engineering Preparation of Volumetric Hydraulic Actuator Production in a Small Company
    21I.P. Timofeev, M.A. Vasilyeva
    Synthesis of Parameters of Executive Body of Continuous Action Mining Loading Machines
    22A.V. Vyboishchik
    The Influence of Dynamical Parameters on Surface Quality During Ball-End Milling
    23G. Barsukov, T. Zhuravleva, O. Kozhus
    Quality of Hydroabrasive Waterjet Cutting Machinability
    24D.V. Ardashev
    Integrated Description of Grinding Wheels Operating Capacity
    25D.V. Ardashev
    Thermomechanical Fatigue of Abrasive Grain
    26A.V.(Jr.) Antsupov, A.V. Antsupov, V.P. Antsupov
    Resource Forecasting for Rolling Bearings According to Energy Criterion of Contact Endurance
    27D.V. Berezhnoi, M.R. Shamim
    Numerical Investigation of Clinch Connection Manufacturing Process
    28R.R. Safin, I.F. Khakimzyanov, S.R. Mukhametzyanov
    Non-volatile Facility for Vacuum Drying of Thermolabile Materials
    29R.M. Khusainov , A.R. Sabirov, I.I. Mubarakshin
    Study of Deformations Field in the Working Zone of Vertical Milling Machine
    30V.V. Lyubimov, V.M. Volgin, I.V. Gnidina
    Regular Microreliefs on Tool Cutting Wedges Surfaces and Electro-Physical and Chemical Methods of Their Production
    31K. Syzrantseva, V. Syzrantsev
    Estimation of Novikov Gearing Loading Capacity Based om Integral Strain Gauges Application
    32R.M. Khusainov, R.R. Khaziev
    Mathematical Model for Assessing the Accuracy of Processed Gears on Gear Shaping Machines
    34B.Ya. Mokritskii, A.V. Morozova, Т.I. Usova
    Results in Composite Hard-alloy and Mill Design Based on Simulation of Their Operation Conditions
    35V.V. Batueva, V.I. Guzeev, V.A. Batuev
    Procedure of Engineering Design of Fine Milling of Crooked Spatial Surfaces with a Stepped Allowance
    36V.V. Batuev, V.A. Batuev
    Assessing the Impact of Center of End Radius Milling Cutter on the Components of Cutting Force at Volume Milling
    37А.М. Kozlov, G.Е. Malyutin, A.V. Handozhko
    Performance Increase of Precision Volumetric Milling on NC Machines Based on Frame-Accurate Control
    38V.V. Kuts, Yu.A. Malneva, O.N. Fedonin
    Concept of New Circuit Synthesis in Cutting Surfaces with Double-Curvature
    39O.V. Anikeeva, A.G. Ivakhnenko, O.Yu. Erenkov
    Modeling the Influence of Geometric Errors of Turning Machine for Accuracy Machinable Surface
    40I.S. Boldyrev, I.A. Shchurov
    FEM thermo-mechanical simulation of the free orthogonal cutting and temperature distribution in tool and workpiece
    41I.A.Shchurova, L.H. Al-Taie
    Constant Scallop-Height Tool Path Generation for Ball-End Mill Cutters and Three-Axis CNC Milling Machines
    42A.V. Shchurova
    Modeling the Turbine Rotor Journal Restoration Located on Cylindrical Surface of the Supporting Bearer
    45Ю.А. Моргунов
    Инновационный потенциал метода обработки как мера эффективности технологических инвестиций
    46A.S. Sergeev, Z.S. Тikhonovа, D.V. Кrainev
    Automated Thrust Force Calculation of Machine Tool Actuators in Fastening and Turning Steels
    47N.V. Syreyshchikova, D.Yu. Pimenov
    Quality Assessment of Emery Cloth-based Abrasive Tool Using Elasticity Technological Parameter
    48S.A. Kochergin, Yu.A. Morgunov, B.P. Saushkin
    Particularities of Pulse Laser Cutting of Thin Plate Titanium Blanks
    49A.S. Kalashnikov, Yu.A. Morgunov, P.A. Kalashnikov
    Continuous Grinding of Teeth by Generating Cylindrical Planetary Transmission Gears
    50V.A. Nosenko, V.N. Tyshkevich, A.V. Sarazov
    Optimization of Conditions for Non-rigid Workpieces Flat Grinding by Elastic Deformations Controlling
    51A.V. Akintseva, P.P. Pereverzev
    Modeling the Influence of the Circle Overtravel on the Stability of Internal Grinding Process
    52A.V. Akintseva, P.P. Pereverzev
    Modeling of Discontinuous Surfaces Intragrinding Processing Peculiarities
    53B.A. Lopatin, S.V. Plotnikova
    Helical-Bevel Gearing with Small Wheel Axles Angles
    54O.S. Dmitrieva, A.N. Nikolaev, A.V. Dmitriev
    Determination of Heat Transfer Coefficient of Falling Film to the Gas Flow in the Jet-Film Contact Device
    58I.S. Boldyrev
    EFG-simulation of the free orthogonal cutting and cutting forces prediction
    60A.A. Dyakonov, L.V. Shipulin, A.S. Ovsienko
    Automated Processing of Vibration Test Results for Basic Metal-concrete Components of the Cutting Machines
    61L.V. Shipulin, A.A. Dyakonov, M.M. Al-Aqeeli
    Development of Module for Automated Abrasive Tool Selection on High-speed Machining Operation
    62I.V. Shmidt, A.S. Degtyareva
    Development and Testing of Concrete Mix for Machine Tool Base Elements
    63V.I. Guzeev, A.Kh. Nurkenov
    Calculation of Technological Limits in Designing High-Speed Operations
    64А.A. Dyakonov, F.Kh. Nurkenov, A.D. Kazansky
    Realization Method of Calculating the Logarithmic Decrement in Turning And Boring CNC Machines Technological Systems
    65I.E. Kolesnichenko, E.A. Kolesnichenko, V.B. Artemiev
    Theoretical Studies of Dust-Raising Characteristics of Heading Machines
    66A. Gritsenko, A. Plaksin, Z. Almetova
    Development of Combined ICE Startup System by Means of Hydraulic Starter
    67R.R. Safin, I.F. Khakimzyanov, A.F. Garaeva
    Energy Saving Equipment for Crushed Materials Drying
    68J.L. Tchigirinsky, I.V. Firsov, P.S. Nesterenko
    Influence of Finishing Methods of Treatment on Condition of Steel 36NiCrMo16 Part Surface Layer
    69V.V. Telegin, A.M. Kozlov, V I. Sakalo
    Solid Modeling and Dynamic Analysis of Mechanisms of Press-forging Machines
    70M.A. Kuznetsov, E.A. Zernin, V.I. Danilov
    Structure, Mechanical Properties and Corrosion Resistance of Stainless Steel Surface Layers Faced Using Ultradisperse Powders of Inorganic Materials
    71N.N. Ogarkov, S.I. Platov, D.V. Sufyanov
    Development of Criteria Specifying the Conditions of Interaction between the Scale with the Rolls of Continuous Cast Machine and Continuous Cast Billets
    72K.A. Odnokurtsev, E.V. Zykova
    Providing for Positioning Accuracy when Assembling Large-Sized Constructions
    74D.V. Kraynev, A.A. Bondarev, Yu.L. Tchigirinsky
    On-line Monitoring and Parameter Control of a Surface Microprofile
    76R.M. Khisamutdinov, I.Z. Sungatov, M.R. Khisamutdinov
    Kinematics of Spherical Milling Cutters Forming
    77P.A.Ogin, D. G.Levashkin, S.I.Yaresko
    Block-Modular Principle of Build Composition Automatically Changeable Laser Modules for CNC Machines
    78M.M. Tverskoy, V.N. Andrianov, A.V. Sokolov
    Creating New Generation of Actuators for Shut-off and Control Ball Valves with Double-Gate
    80A. Fomin, L. Dvornikov, Jamie Paik
    Calculation of General Number of Imposed Constraints of Kinematic Chains
    83L. Nikitina
    Modeling of Motor-Spindel Thermal Values
    84A. Bobkov
    Criteria for Small Capacity Pump Type Selection for Two Phase Temperature Control System of Information Support Space Vehicle
    85N. Pokintelitsa, E. Levchenko
    Application of Thermo-Frictional and Mechanical Treatment Complex Method for Production of Parts with Specific Properties
    87A.N. Golovko, A.G. Kondrashov, S.Yu. Yurasov
    Improved Design of a Worm Type Instrument for Final Machining of Evolvent Gear Teeth
    88S. Maksimov, J. Bashkova, A. Maksimova
    Modernization of Technology and Equipment for Glass Fiber Reinforced Plastic Rebar Production
    89N. Kanatnikov, P. Kanatnikova, V. Vlasov
    Tool Design Influence on the Thermal Effects Appearing during Bevel Gear Processing
    90L.R. Kashapova, D.L. Pankratov, V.G. Shibakov
    Automated Generation of Rational Sheet Metal Forming Technology Variants at Process Engineering Stage
    94S.V. Naumov, A.M. Ignatova, M.N. Ignatov
    Submerged Arc Welding Using Slag Base of West Urals Mineral Raw Resources with Low Detrimental Impurities Content
    96S. Varushkin, D. Trushnikov, G. Permyakov
    Optimal Mode of Beam Oscillation for Melt-Through Mode in Electron Beam Welding and Its Influence on Penetration Control System
    97Ashwani Pratap, Karali Patra, A.A. Dyakonov
    Enhancing Performances of Micro-Grinding of BK-7 Glass through Modification of PCD Micro-Tool
    99E.V. Solomin , E.A. Sirotkin, A.A. Sirotkin
    Universal Electrospinning Scalable Plant for Filtering Nanofiber Production
    100N.F. Timerbaev, A.R. Sadrtdinov, R.G. Safin
    Software Systems Application for Shafts Strength Analysis in Mechanical Engineering
    102N.Yu. Dudareva, R.D. Enikeev, V.Yu. Ivanov
    Thermal Protection of Internal Combustion Engines Pistons
    103Yu.M. Lyashenko, E.A. Revyakina, D.N. Shurygin
    Application of the Laws of Mechanics of Granulated Solidsin Studies to Loader Bucket Interaction with Bulk Material Stack
    104D.S. Belinin, S.D. Neulybin, Yu. D. Schitsyn
    Creating Composite Materials Based on High-Nickel Alloys with the Use of a Plasma Arc at Current Reverse Polarity
    105S.D. Neulybin, D.S. Belinin, S. A. Terentyev
    Comparative Analysis of Wear and Corrosion Attack Resistance of Bimetal Steel-Copper Products Manufactured by Plasma-Jet Hard-Facing with Direct and Reversed Polarity Current
    109A.V. Azarov, N.S. Zhukova, F.G. Antonov
    Water-spray systems reducing negative effects of fine-dispersion dust at operator’s workplaces of machine-building industries
    113T. Stadnik , D. Sidorov, A. Kharchenko
    Investigation of Diamond Elastic Belts Characteristics Effect on Rotary Belt Grinding Process Output Performance
    115S. Bratan, S. Roshchupkin, P. Novikov
    Modeling the Grinding Wheel Working Surface State
    116S. Bratan, S. Roshchupkin, P. Novikov
    Probabilistic Approach for Modeling Electroerosion Removal of Grinding Wheel Bond
    117A.V. Zotov, D.A. Rastorguev, R.R. Dema
    Surface Temperature Modeling and Analysis During Cladding of Technological Equipment Guide by Wire Tool
    118A. Tarakhovskiy, B. Bukach, D. Tabakаev
    Mechanical Device for Sealing Ring Mounting into Internal Groove And its Opening Technical and Economic Justification
    119D.A. Rastorguev, A.V. Zotov, A.V. Bobrowskii
    Simulation and Forecasting of Wire Tool Piles Fatigue Endurance by Using Neural Networks
    120R. Anisimov, A. Tarapanov, N. Kanatnikov
    Complex Analysis of Edge Cutting Machining of Periodic Profiles
    123O.V. Zakharov, A.F. Balaev, A.V. Kochetkov
    Modeling Optimal Path of Touch Sensor of Coordinate Measuring Machine Based on Traveling Salesman Problem Solution
    124A.A. Polivanov, A.V. Belov, E.V. Morozova
    Evaluation of Stress-Strain State of Engineering Structures Subject to Damage in Materials Under Creep-Based Simulation
    125A.V. Kapitanov
    Manufacturing System Flexibility Control
    126S. Egorov, A. Kapitanov, D. Loktev
    Turbine Blades Profile and Surface Roughness Measurement
    127Y.N. Oteny, V.F. Kazak, E.V. Morozova
    Determination of Geometrical Parameters Contact Zone for Detail Machining Surface Plastic Deformation
    130D.L. Karelin, A.V. Boldyrev, A.M. Belousov
    Design Features of Multistage Centrifugal Compressor of Vapor Refrigerating Machine with Complete Working Fluid Intercooling
    131V.V. Kuts, M.S. Razumov, M.A. Sidorov
    Development of the Internally Cutting Milling Cutter Model with Radial Advance for Treatment of Profiling Rolls
    133D. Abdulgazis, E. Umerov, U. Abdulgazis
    Development of Endothermic Properties and Improvement of Tribotechnological Properties in Oil Cutting and Cooling Lubricants
    134S.V. Kasjanov, A.G. Kondrashov, D.T. Safarov
    Regulation of Geometrical Parameters Deviations of Automotive Components Parts through Diagnostic Measurements Organization
    135V. Lelyukhin, O. Kolesnikova
    Approach to Determining Order of Production of Parts and Assembly Units of Engineering Products in Production Process Planning
    136А.В. Стулов, И.А. Трофимович, А.И. Тихонов
    Разработка САПР силовых трансформаторов на основе автономых библиотек моделирования физических полей и электрических цепей
    137I. Bobarika, A. Demidov, S. Bukhanchenko
    Hydraulic Model and Algorithm for Branched Hydraulic Systems Parameters Optimization
    138Chidurala Srinivas
    Consignment Inventory model with variable
    Section 1.4. Surface transport and technological machines
    2R.V. Kargin, I.A. Yakovlev, E.A. Shemshura
    Modeling of Workflow in the Grip-Container-Grip System of Body Garbage Trucks
    3I.P. Troyanovskaya, B.M. Pozin, N.K. Noskov
    Ploughing Tractor Lateral Withdrawal Model
    4S.V. Kondakov, E.A.Gorely, A.G. Savinovskich
    Mathematic Modeling of Self-Propelled Unmanned Tracked Platform with Hydrostatic Transmission
    5E.A. Salykin, V.I. Lipilin, A.A. Skorobogatov
    Method of Fuel Injection in Small Diesel Engines
    6A.V. Pobedin, V.V. Shekhovtsov, A.A. Dolotov
    Computational Probabilistic Evaluation Of Passenger Cars Noise Level
    7M.V. Lyashenko, A.P. Chebanenko, P.V. Potapov
    Analysis of Stresses In Elements of Hub Reduction Gear of TREKOL-39041Off-road Vehicle
    8V.A. Ryzhikov, D.Y. Batyshchev
    Differential Braking Device
    9V.V.Blednykh, P.G.Svechnikov, I.P.Troyanovskaya
    Tractor Plough with Repeated Cutting Angle on Working Elements
    10D.Ya.Antipin, D.A.Bondarenko, O.V.Izmerov
    Study of Dynamic Loads in Traction Drive of Freight Locomotive under the Influence of Railway Track Irregularities
    11D.Ya. Antipin , O.I. Polushko, S.G. Shorokhov
    Evaluation of Inter-Car Connections Dynamic Loading at Train - Obstacle Emergency Collision
    16V.S. Velikanov, A.V. Kozyr, N.V. Dyorina
    Engineering Implementation of View Objectives in Mine Excavator Design
    19V.S. Kukis, A.V. Raznoshinskai, E.A. Omelchenko
    Implementation and Results of Pneumatic Fuel Atomization in Diesel
    21Рихтер Е.Е., Игнатова А.В.
    Сравнительная оценка нагруженности и теплового состояния массивных шин с наружной и внутренней амортизацией
    24M.S. Dmitriyev, M.L. Khasanova, A.V. Raznoshinskaya
    Substantiation of Hydraulic System for Weighing Freights Transported with Dump Trucks
    25V. Kushnir, N. Gavrilov, S. Kim
    Experimental Studies on Grain Material Extruding Process
    26A.Sh. Khusainov, A.A. Glushchenko
    Increasing Wear Resistance of Internal Combustion Engines Cylinders with Work Friction Surface Metal Coating
    27S.N. Ashurkova, V.V. Kobishchanov, E.V. Kolchina
    Methods Used to Analyze the Impact of Passenger Cars Bodies Design Features on their Stiffness and Strength Characteristics
    28A.I. Pavlov, I.A. Polyanin, K.E. Kozlov
    Improving the Reliability of Hydraulic Drives Components
    29Y. Kudryavtsev
    Automatic Calculation Techniques for Soil Digging Force Applied by Bucket Swing
    30Y. Kudryavtsev
    Identification of Soil Excavation Operating Zone of Excavator Equipped with Backhoe Attachment
    31S.A. Plotnikov, A.N. Kartashevich, E.A. Kuimov
    Development of Diesel-Eengine Bio-fuel Supply-Line Components and Systems
    32I. Timofeev, A. Bolshunov, M. Stoliarova
    Specific Features of Friction-Type Traction Gear of Rotating Machines Drives
    33A. Nosenko, A. Domnitskiy, E. Shemshura
    Predictive Reliability Assessment of Loading and Transport Modules of Tunneling Equipment During Construction of Road Tunnels
    36E. Volkov, N. Gorshkova, E. Tatarincev
    Mobile Remote Controller for Construction Machines
    41N.A Fomenko, S.V. Aleksikov, S.G. Artyomova
    Blocking Device of the Hydraulic Actuator of Vehicles in Case of Unauthorized Emission of Power Fluid into the Atmosphere
    43G.I. Pavlov, О.R. Sitnikov, K.A. Valeeva
    Performance Evaluation of Internal Combustion Engines Silencers based on Comparative Testing of Their Characteristics on Non-Motorized Test Stand
    44V.S. Goun, V.S. Morozova, V.L. Polyatsko
    The Rating Factors in of Jet Fuel Formation in Channel Spray Nozzles Diesel
    47Y. Koshkarev
    Influence of Engine Load on Concrete Pump Operating Parameters
    48G.I. Pavlov, P.V. Nakoryakov, E.A. Sukhovaya
    Development of Silencer for Low-Power Internal Combustion Engines
    50K.V. Burmistrov, N.A. Osintsev, A.N. Shakshakpaev
    Selection of Open-Pit Dump Trucks during Quarry Reconstruction
    57A. Fomin, W. Ivanov, Jamie Paik
    Design of Five-Bar Screw-Lever Manipulator and Optimization of its Output Link Path of Motion
    63S. Mogilny, A. Sholomitskii
    Precision Analysis of Geometric Parameters for Rotating Machines During Cold Alignment
    65V.A. Kalmakov, A.A. Andreev, A.S. Martyanov
    Remaining Vehicles Useful Lifetime Estimation Based on Operation Conditions Measurement
    66Карелин Д.Л.
    Метод определения температуры конденсации рабочего агента для парокомпрессионных систем охлаждения энергетических установок
    67Yu. Pogulyaev, O. Nikishin, A. Zheltov
    The Kinematics of the Swashplate Engine with two Rotating Pairs
    68A.Yu. Bukashkin, R.Yu. Dobretsov, Yu.V. Galyshev
    Split Transmission of Tractor with Automatic Gearbox
    69R.A. Didikov, R.Yu. Dobretsov, Yu.V. Galyshev
    Power Distribution Control in Perspective Wheeled Tractor Transmission
    70A.V. Kireev, N.M. Kozhemyaka, N.V. Grebennikov
    Energy-regenerative Shock Absorber Mathematical Model
    71S.A. Voynash, P.A. Gaydukova, A.N. Markov
    Rational Route Сhoosing Methodology for Machine Parts Restoration and Repair
    Part 2. Materials engineering and technologies for production and processing
    2Shaburova N.A., Ratmanov T.D., Minkin A.M.
    Physical-Chemical Properties of Molybdenum Films Prepared with Magnetron Sputtering
    5Loganina V.I., Pyshkina I.S.
    Synthesis Mode Optimization of Supplement Based on Calcium Hydrosilicate for Lime Dry Mixes
    6Zimich V.V.
    Regulation the Properties of Materials on Magnesia Binder
    7Matyukhin V.I., Dudko V.A., Grebneva N.V.
    Current State and Future Prospects for Improvement of Mineral Melt Production Technologies
    9Shabashov A.
    Getting metallic suture materials for microsurgery
    10Davydov S.V., Gorlenko A.O.
    The Wear Resistance Of Mottled Iron With Stabilized Carbide Phase
    11Mikhnev I.P., Salnikova N.A., Lempert M.B.
    Research of Activity of Natural Radionuclides in Construction Raw Materials of the Volgograd Region
    12Yusupova A.A., Akhmetova R.T., Shafigullin L.N.
    Sulfur Composite Materials Based on Sulfide Containing Industrial Waste
    14Zimich V.V.
    Improving the Properties and Structure of Magnesium Materials of Sol of Iron Hydroxide
    15Skorikov А.V., Ulyanovskaya E.V.
    The Kinetics of Formation of Diffusion Layers when the Surface Alloying Steel with Chromium Powder by Electrolysis of Ionic Salt Melts
    16Skorikov А.V., Ulyanovskaya E.V.
    Features Diffusion Aluminizing Powder Steels in Liquid Media
    18Oreshkin D.V., Perfilov V.A.
    Environmental and Technical Possibilities of Marble Waste Recycling in Bricks and Sorbents Production
    19Perfilov V.A., Oreshkin D.V.
    Improvement of Environmental Safety Due to Utilization of Industrial Wastes In Refractory Concretes Production
    22Knyazev A.V., Lahderanta E., Zakharchuk I.A.
    Magnetic and Microstructural Properties of Cobalt Substituted NiZn Ferrite Powders
    23Letavin D.A.
    Saving Working Material When Manufacturing Microstrip Microwave Devices
    24Tuncev D.V., Sattarova Z.G., Galiev I.M.
    Multi-layer Wood-Polymer Composite
    25Rozenbaum M.A., Serebryakov A.V., Bazhukov I., Shimov G.V.
    Study of Residual Stresses and Surface Hardening in Tubes for Nuclear Steam Generators
    26Platov S.I., Nekit V.A., Ogarkov N.N.
    Determination of Frictional Forces during Wire Rod Drawing Process by Reverse Method
    27Poyarkova E.V., Kuzeev I.R.
    Multifractal Parametrization of Welded Joints Structure as an Instrument of Diagnostics and Detection of Defects
    28Poyarkova E.V., Kuzeev I.R., Zabelin K.L.
    Assessment of welded joints structure defectiveness based on the presence of non-metallic inclusions
    29Shestakov A.L., Karipov R.S., Karipov D.R., Barbasova Т.A., Grechkin S.A., Skorobogatov A.V.
    The Design of Capstone (USA) Injection Microturbine Gas Burners and Ways for Their Improvement
    30Krymsky V.V., Balakirev V.F., Shaburova N.А.
    Pulse Processing of Molten Metals
    31Marinin E.A., Chirkov A.M., Gavrilov G.N.
    Choice of Laser Cementation Method of Blade Woodcutting Tools
    32Kuznetsov D.M., Maslova E.E.
    Use Of Acoustic Control Method in Galvanic Technology
    33Reshetnikova E.S., Usatiy D.U., Usataya T.V.
    Bolts Manufacturing Technology
    34Mayatskaya I.A., Fedchenko A.E., Zagutin D.S.
    Strengthening Mini Silo Construction Made of Reinforced Concrete Blocks with Carbon Fiber Lamellae
    35Mayatskaya I.A., Fedchenko A.E., Demchenko D.B.
    Strengthening Building Structures with Polymer Composite Materials
    37Sagalakov A.M., Malikov V.N., Dmitriev S.F.
    Research of Nanomaterials with the Use of Subminiature Eddy Current Transducers
    38Osmanov S.G.
    Influence of Concrete Mix Transportation with Inertia Conveyor on Concrete Properties
    40Koryanova Y.I.
    Structure and properties of concrete for injection with two-stage expansion
    41Nesvetaev G.V., Korchagin I.V., Lopatina Y.Y.
    On Effect of Superplasticizers and Mineral Additives On Creep Factor of Hardened Cement Paste and Concrete
    42Grushko A.V., Kukhar V.V., Slobodyanyuk Yu.O.
    Phenomenological Model of Low-Carbon Steels Hardening during Multistage Drawing
    43Vishnevskiy А.А., Kapustin F.L.
    Low Density Cellular Concrete Made of Reftinskaya SDPP Fly Ash
    44Belyaev А.N., Degterev B.I., Flegentov I.V.
    Future-Oriented Technology of Preparing Suspensions of Metals
    46Makhneva T.M., Dement’yev V.B., Makarov S.S.
    On Reliability Of Stainless Maraging Steel
    47Shekhtman S.R., Migranov М.S.
    TI-TIN Multilayer Coatings Obtained by ION FLUX Surface Modification
    48Nepriakhin S.O.
    Simulation of Thermal Conditions during Rolling of I-Beams at Modern Rail and Structural Steel Mill
    50Galyavetdinov N.R., Safin R.R., Khasanshina R.T.
    Wood Heat Treatment in Construction Materials Production
    51Adamova M.E., Zhukov E.A.
    Lamb Wave Analysis for Plate of Weak Ferromagnetic YFeO3
    52Radchenko S.J., Dorokhov D.O., Gryadunov I.M.
    Evolution of BrOCS 5-5-5 Alloy Microstructure and Mechanical Parameters under Intensive Plastic Deformation Conditions
    54Бекмурзаев Л.А., Мицик М.Ф., Бырдина М.В.
    Оптимизация раскладок конических спиральных разверток
    56Пожидаева С.Д., Агеева Л.С., Иванов А.М.
    Металлическое олово как реагент в получении основных и средних солей олова (II) и олова (IV)
    57Mikhailov G.G., Morozova A.G., Lonzinger T.M.
    Research of Surface Phase Formation in Interaction of Granular Composite Sorbent with Technological Multicomponent Saline Solutions
    58Kolesnik V.V., Rubanov Yu.K., Tokach Yu.E.
    Multi-Component Coatings Formation on Polycathode Magnetron Sputtering Systems
    59Zhelnina A.V., Illarionov A.G., Kalienko M.S.
    Effect of Heat Treatment Temperature-Rate Parameters on Structure and Complex of Physical-Mechanical Properties in Vst5553 Titanium Alloy Rod Semi-Finished Goods
    63Shaikhutdinova A.R., Safin R.R., Nazipova F.V.
    Thermal Modification of Wood in Production of Finishing Materials
    64Багайсков Ю.С.
    Особенности изготовления высокоструктурных равномернопористых абразивных инструментов на керамической связке
    66Safin R.R., Kaynov P.A., Beliakova E.A.
    Research of Wood Thermal Modification Process in Flue Gases Environment
    67Sokolov A.G., Bobylyov E.E.
    Diffusion Saturation by Titanium from Liquid-Metal Media as Way to Increase Carbide-Tipped Tool Life
    69Markov V.A., Sokolova V.A., Kretinin V.I.
    Assessing Impact Strength of Blade Edges of Forestry Machinery Operating Components
    70Kasatkina E.G., Mezin I.Y., Limarev A.S., Somova J.V.
    Quality Evaluation of Platinit Wire by Different Producers
    71Dovydenkov V.A., Zvereva O.S., Alibekov S.Ya.
    Process of Shaped Metal Billets Production from Compositions Based on Iron Powder, Iron Oxide, and Binder
    74Moskovsky S.V., Noskov A.S., Rudnov V.S.
    New Composite Dispersiony Reinforcement Materials with Modulated Characteristics
    75Evdokimov S.I., Meshkov Е.I., Gerasimenko T.E.
    Fusion Technology Nanopowder Magnetic Fluids
    76Shmorgun V.G., Bogdanov A.I., Taube A.O., Novikov R.E.
    Investigation of Heat Resistance OF Al-Ni Layered Coating
    77Rodichev A.Yu., Sytin A.V., Barabash V.V.
    Technological Increase of Adhesion Strength between Antifriction Coating and Base in Bimetal Fluid-Film Bearings
    78Tukhareli V.D., Cherednichenko T.F., Pushkarskaya O.Y.
    New Unconventional Additives in Concrete Technology for Expansion its Functionality
    79Shveyova T.V., Astashchenko V.I, Shveyov A.I.
    Minimization and Stabilization of Deformation and Bucking of Cemented Car Details
    80Shveyova T.V., Pesin A.M., Pustovoytov D.O.
    Behavior of Micro-Alloyed Steel at Thermal Treatment
    82Syutova A.I., Alibekov S.Ya., Syutov N.P.
    Study of Carbon Fiber Materials Sorption Capacity to Remove Heavy Metal Ions and Oil Products from Wastewater during its Treatment
    83Khasanshin R.R., Safin R.R., Galyavetdinov N.R.
    Use of Low-Grade Vegetable Raw Materials in Production of Composites by Preliminary Processing
    84Kretova Yu.I.
    Practical Aspects of Electrophysical Methods Application in Brewing Technology
    85Gafarova V.A., Krioni N.K., Mingazhev A.D.
    Renovation Repair of Trunk Pipeline While Operation
    86Mingazhev A.D., Krioni N.K., Gafarova V.A.
    Integrated Method of Study of Hardened of Details
    87Krioni N.K., Mingazheva A.A., Kononova A.Yu., Mingazhev A.D., Gafarova V.A.
    Islet Nitriding of Product Surfaces Made from Alloy Steel
    88Cherunova I., Kornev N., Paschen M.
    Study of Compression Soft Porous Foam Materials
    89Cherunova I., Lesnikova T., Korinteli A.
    Effect of Aggressive Components of the Marine Environment the Protective Properties of the Textile Materials
    91Shamaev V.A., Yudin R.V., Parinov D.A.
    Design Engineering and Manufacturing of Technology of Bearings for Heavy-Duty Friction Units
    92Tukhareli V.D., Tukhareli A.V., Cherednichenko T.F.
    Expansion of Concrete Functionality Due to Use of New Hydrophobic Additives
    93Novokreschenov V.V., Rodyakina R.V., Karimbekov M.A.
    Physical and Technological Features of Formation of Large Thickness Welded Joints in Electron-Beam Welding
    94Artemov A.O., Ignatov M.N., Ignatova A.M.
    Influence of Structural Components on Strength Properties of Silicate Stone Casting Materials during Controlled Crystallization
    96Naumov S.V., Ignatov M.N., Sheksheev M.A.
    Technology of Mineral Raw Materials Granulation by Electric Arc for Manufacturing of Welding Fused Flux
    97Mastalygina E.E., Popov A.A.
    Mechanical Properties and Stress-Strain Behaviour of Binary and Ternary Composites Based on Polyolefins and Vegetable Fillers
    98Sukhareva K.V., Mikhailov I.A., Mastalygina E.E.
    Properties of Elastomeric Adhesive Composition Based on Chlorinated Isobutylene Isoprene Rubber Obtained by Mechanochemical Halide Modification
    99Abramyan S.G., Oganesyan O.V.
    Polymer-Bitumen Binder Based Multifunctional Material
    100Shikalov V.S., Ryashin N.S., Lapaev A.V.
    Cold Spray Repairing Corrosively Damaged Areas on Aircraft Constructions
    101Zueva O.S., Makarova A.O., Faizullin D.A.
    Creating Carbon Nanotubes Microenvironment in Surfactant Water Solutions
    105Belyakov V.A., Bannikova L.A.
    Study and Analysis of Aluminate Dry Construction Mixtures Properties
    106Zvereva E.R., Khabibullina R.V., Zueva O.S.
    Nano Additives Influence on Fuel Oil Properties
    108Vyboishchik A.V., Kostiunina I.L.
    Improving Masonry and Protective Paints Quality
    109Starostina I.V., Stolyarov D.V., Kosukhin M.M.
    Carbonic and Mineral Adsorbent, Produced of Slurry Withdrawal of Oil-Extracting Production
    110Kosukhin M.M., Shapovalov N.A., Kosukhin A.M.
    Colloid-chemical Bases on Creation of Multifunctional Modifiers of Concrete Mix and Concrete
    112Korovkin M.O., Eroshkina N.A.
    Combined Influence of Opoka and Slag on Cement Properties in Presence of Superplasticizer
    114Ismagilov F., Vavilov V., Miniyarov A., Mednov A.
    Research of Materials for High Temperature Electromechanical Energy Converter
    115Korovkin M.O., Grintsov D.M.
    Research of Efficient Methods of Superplasticizer Introduction into Cement Materials
    117Tkachuk G.A., Shimov V.V., Chikova O.A.
    Examining the Microstructure of Industrial Leaded Brass Blanks for Quality Control
    118Zlobin V.N., Kushch L.R., Kudashev A.S.
    Ion Implantation Modification of Surfaces
    119Lupandina N.S., Kiryushina N.Yu., Porozhnyuk E.V.
    Extension of Raw Material Base for Ceramic Building Bricks Production
    120Safin R.G., Sattarova Z.G., Khairullina E.R.
    Technology of Wood Waste Processing to Obtain Construction Material
    121Shaparev A.V., Savin I.A.
    Calculation of Joint Plastic Deformation to Form Metal Compound in Cold Condition
    125Kasharina T.P.
    Improving the Reliability of Shell Structures Made of Composite Nanomaterials
    126Kuz'min V.I., Lysak V.I., Kuz’min E.V.
    Determination of Kinematic Parameters and the Formation of Microstructure of Bimetallic Joints During Explosive Welding
    128Valeev A.A., Morozova E.V.
    Simple Universal Kelvin Equation Valid in Critical Point Vicinity and its Application to Carbon Dioxide Capillary Condensation in Mesoporous Silica
    129Letyagin I.Yu.
    Using Mathematical Modeling to Develop Electrode Coating Composition for Stable Arcing and Arc Restarting
    130Leont’ev L.B., Shapkin N.P., Makarov V.N.
    Functional Nanostructured Tribotechnical Materials
    131Mikhailov G.G., Makrovets L.A.
    Thermodynamic Modeling of Phase Equilibrium in Fe–Y–Cr–C–O Liquid Metal System
    135Kush L.R., Kuryanov V.N.
    Questions of use’ efficiency of the messenger wire on standard organization 71915393-ТS134-2013
    140Zeyde K.M., Gudkova S.A., Vinnik D.A.
    Investigation of Barium hexaferrite BaFe12O19 Electro Physical parameters using open-ended coaxial probe method
    141Cherkasov V.D., Yurkin Yu.V., Avdonin V.V.
    Study of Physical and Mechanical Properties of Non-Polar Rubber-Based Sealants Depending on Filler Type and Volume
    142Cherkasov V.D., Yurkin Yu.V., Avdonin V.V.
    Theoretical and Experimental Investigation of Vibration Damping Sheet Dynamic Behavior
    144Shtin S.V., Lykasov А.А.
    Investigation of the Equilibrium Germanium-Substituted Wustite with Metal and Spinel Solutions in the Fе–Gе–O System
    145Vasilenko Т.А., Koltun A.A.
    Chemical Aspects of the Obtaining of Iron-containing Coagulant-Flocculant from Electric Steel Melting Slag for Wastewater Treatment
    147Rodichev A.Yu., Sytin A.V., Tyurin V.O.
    Research on Influence of Technology of Bimetal Fluid-Film Bearing Manufacturing on Microstructure and Microhardness of Antifriction Coating and Steel Base
    149Temchenko V.V., Kustov V.N., Lukyanenko K.S.
    Study the effect heavy elements nanoparticles in the photons energy spectrum in a tissue-equivalent medium
    150Lykov P.A., Shults A.O., Bromer K.A.
    The Production and Subsequent Selective Laser Melting of AlSi12 Powder
    151Lykov P.A., Zherebtsov D.A., Nerush S.V.
    Synthesis of EP648-TiC Metal Matrix Composite Powder for Selective Laser Melting by Ball Milling
    157Vinnik D.A., Trofimov E.A., Zherebtsov D.A.
    Investigation of Ba-Fe-O system near BaFe12O19
    158Baitimerov R.M., Radionova L.V., Safonov E.V.
    Influence of Selective Laser Melting Process Parameters on Porosity of TiAl6V4 Alloy Fabricated by 200W CO2 Laser
    159Chinakhov D.A., Grigorieva E.G., Mayorova E.I.
    Influence of Gas Shielding Method in Welding with Consumable Electrode on Heat Distribution in a Welded Product
    161Reznik P.L., Lobanov M.L.
    Influence of Al-Cu-Mn-Fe-Ti Alloy Composition and Production Parameters of Extruded Semi-Finished Products on Their Structure and Mechanical Properties
    162Sapronova Zh.A., Sapronov D.V., Starostina Yu.L.
    Combined Extender Pigments Based on Industrial Wastes
    163Sapronova Zh.A., Sapronov D.V., Starostina Yu.L.
    The Use of Expanded Clay Dust in Paint Manufacturing
    164Starostina I.V., Simonov M.M., Denisova L.V.
    The Use of Ferrovanadium Production Sludge Wastes in Claydite Gravel Technology
    165Anikeev A.N., Chumanov I.V.
    Effect of Heat Treatment on Change Concentration of Powders in Gradient Material
    166Demidov A.N., Karimbekov M.A., Marchenkov A.Yu.
    Heating and Cooling Impact on Mechanical Properties of RIP Electric Insulator for High Voltage Inputs
    168Zlobina I.V., Bekrenev N.V., Muldasheva G.K.
    Electro Physical Hardening of Non Metallic Composite Materials in Additive Technology
    169Mbelle Samuel Bisong, Sivtsev P.V. , Lepov V.V.
    Numerical Analysis of Stress-Strain State and Crack Propagation in Welded Samples
    170Sandulyak A.A., Sandulyak A.V., Nicole Pamme
    Possibility of Block Grouping of Magnetic Inspection Operations for Iron Impurities in Oils and Cutting Fluids
    173Kim L.V., Shaly E.E.
    Capillary-Porous Effects in Concrete during Ice Abrasion
    174Gordienko P.S., Dostovalov V.A., Pashnina E.V.
    Hydrofluoride Method of Complex Processing of Titanium-Containing Raw Materials
    175Gordienko P.S., Yarusova S.B., Shabalin I.A., Dostovalov V.A.
    Sorption Properties of Nanostructured Calcium Aluminosilicate with respect to Cesium Ions
    177Slavcheva G.S., Bekker A.T.
    Temperature and Humidity Dependence on Strength of High Performance Concrete
    191Bogdanov S.P., Garshin A.P.
    Refractory Core-shell Powders for Additive Industries
    192Kosichenko Yu.M., Baev O.A.
    Modified Geomembrane Compositions FOR Hydraulic Structure Impervious Coatings
    193Kapralova V.M., Karov D.D., Slutsker A.I.
    New 3D Cross-linked Copolymers with Variable Mechanical Properties and High Durability
    194Kotov S.A., Gushchina L.B., Livintsova M.G.
    Research of Processes of Products Fabrication by Self-Propagating High-Temperature Synthesis (SHS) Method
    195Belyaev A.K., Polyanskiy V.A., Tretiakov D.A., Yakovlev Yu.A.
    Identification of Waves of Plastic Deformation by Acoustoelasticity Method
    198Sklyar M.O., Klimova-Korsmik O.G., Cheverikin V.V.
    Formation Structure and Properties of Parts from Titanium Alloys Produced by Direct Laser Deposition
    199Lobachev A.M., Modestov V.S., Pivkov A.V.
    Direct Finite Element Modeling of Ultrasonic Waves Propagation in Material with Considering Difference of Shear Modulus in Thin Surface Layer
    200Pustovalov E.V., Modin E.B., Fedorets A.N.
    Atomic Structure Design of Rapidly Quenched Amorphous Cobalt-Based Alloys
    201Statsenko L.G., Pugovkina O.A., Galay A.R.
    Use of Non-Ferrous Metals in Microwave-Filters Construction
    202Tsimbelman N.Ya., Chernova T.I., Shalaya T.E.
    Engineering Analysis Methods for Hydraulic Shell Structures with Infill
    203Zakasovskaya E.V., Tarasov V.S., Glushchenko A.V.
    Information Security Issues in Distributed Information Measurement System
    204Kim Song Chol, Mansurov Y.N., Li Sang Hun
    Method for Copper Nanoparticles Production and Their Lubricating Ability Analysis
    205Fomin A.A.
    Determining Undeformed Chip Thickness Models in Milling and Its Verification during Wood Processing
    206Fomin A.A.
    Limiting Product Surface and its Use in Profile Milling Design Operations
    207Sattarov R.R., Galiakberova E.F.
    Design and Basic Consideration of Electromagnetic Heating Yarns with Foucault Currents for Smart Functional Fabrics
    208Ogorodnikova O.M., Chermensky V.I., Konchakovsky I.V.
    Simulation of Centrifugal Casting and Structure of Fe-Ni-Co Super-Invar Alloy
    209Pustovoit V.N., Dolgachev Yu.D., Dombrovskii Yu.M.
    Use of the Superplasticity Phenomenon of Steel for "Internal" Magnetic Correcting a Product
    210Lisenkov A.A., Kostrin D.K., Pikus M.I.
    Vacuum Arc Deposition of Carbon and Carbon-Based Coatings
    211Kharisov L.R., Safronov N.N., Safronov G.N.
    Integral Performance Criterion of Self-propagating High-temperature Synthesis Ferrosilid for Optimization of Charge Composition
    212Voronin S.V., Chaplygin К.К., Litoshina А.D., Konovalov S.V.
    Research into АK12+2.38%Cu+0.06%SiC Aluminum Matrix Composite Structure with Scanning Probe Microscope
    213Leyvi A.Ya, Talala K.A., Yalovets A.P.
    Multicomponent Diffusion in Metallic Systems Exposed to E-Beams
    214Loginov Yu.N., Stepanov S.I., Khanykova E.V.
    Effect of Pore Architecture of Titanium Implants on Stress-Strain State Upon Compression
    215Zubkov N.N., Vasil'ev S.G., Poptsov V.V.
    New Method of Quench Surface Turning
    216Fesenko L.N., Pchelnikov I.V., Fedotov R.V.
    Comparative Assessment of Resistance of Hardwearing Anodes, Ternary Coated with Iridium, Ruthenium and Titanium
    217Vdovin K.N., Feoktistov N.A., Gorlenko D.A.
    Influence of Heat Treatment on Wear Resistance of Alloyed Hadfield Steel and Phase Transformations in It
    218Popov A.A., Illarionov A.G., Grib S.V.
    Applying the Electron Concentration Calculation Method to Assess the Influence of Hydrogen on the Position of the Variable Solubility Lines in Ti – Cr System
    219Ageev E.V., Altukhov A.Y., Khardikov S.V., Kirichek A.V.
    Investigation of Phase Composition of Samples Sintered from Tungsten-Containing Composite Micro - and Nano-Powders
    220Stepanov V.V., Saldaev V.A., Tsvetkov V.E.
    Composite Material for Railroad Tie
    222Seredin B., Popov V.P., Zaichenko A.N.
    Optimizing Conditions for Formation of Local Zones for Thermomigration in Silicon
    223Finkelstein A., Schaefer A., Chikova O.
    Study of Microstructure, Phase Composition, Crystalline Structure of AlSi7Fe1 Casting Obtained by Oxygen Melt Blowing
    224Melchakov M.A., Scvortsov A.I, Scvortsov A.A.
    Effect of Thermal and Thermal Magnetic Treatment on Damping Properties of Fe–Cr–Al Alloys
    225Gadeev D.V., Demakov S.L., Vodolazskiy F.V.
    Beta-phase Decomposition Sequence during Continuous Cooling of High-Temperature Titanium Alloy
    226Komina O.Yu., Zhukov E.A.
    Influence of Constant Magnetic Field on Domain Wall Dynamics in YFeO3
    227Kinzin D.I., Levandovskiy S.A., Tulupov O.N.
    Analysis of Efficiency of Roll Pass Design Options for Roughing Stands of Section Rolling Mill
    228Kapustin F.L., Ponomarenko A.A., Oleinik V.N.
    Sulfoaluminate Cements Composition and Properties
    229Eroshkina N.A., Korovkin M.O.
    Hardening Kinetics of Geopolymer Binder Based on Magmatic Rock with Mineral Additives
    230Mironov V., Lukashuk O.,Vichuzhanin D.
    Method for Describing Fatigue Processes in Structural Materials
    232Vodolazsky F.V., Zhloba A.V., Popov A.A.
    Influence of Heating Temperature and Cooling Conditions on Structure and Properties of Two-Phase Titanium Alloy
    233Chebotarev S.N., Yatsenko A.N., Lunin L.S.
    Features of Zone Thermal Recrystallization of Germaniun Layers Grown on Silicon Substrates from Discrete Source
    234Maisuradze M.V., Ryzhkov M.A., Kuklina A.A.
    Phase Transformations in D6AC Steel During Continuous Cooling
    235Maisuradze M.V., Ryzhkov M.A., Surnaeva O.A.
    Phase Transformations in Novel Medium Carbon High Hardenability Steels
    236Gurulev D.N., Palatkina L.V., Gonik I.L.
    On Deformation Powers of the Explosion Welded and Rolled Titanium-Aluminium Composite
    237Lunina M.L., Kazakova A.E., Arustamyan D.A.
    Study of Properties of Multicomponent Heterostructures Based on AIIIBV Compounds
    238Valeev A.R.
    Designing Metamaterial with Arc-Structure for Wide Broad Vibration Isolating
    239Zhilenkov A.A.
    GaN Materials Nanostructures Growth Control in the Epitaxial Units
    240Yakimov A.K., Butusova Ye.N., Tumanin A.V.
    External Factors Impact on Basic Properties of Hovercraft Skirt Materials
    242Kanayev A., Bogomolov A., Sarsembayeva T.
    Overall Hardening of Solid-Rolled Wagon Wheels by Volume Quenching and Surface Plasma Processing
    243Volkova T.A., Aletdinov R.F., Fedosov E.M.
    New Material Creation by Phase Separation in Liquid Mixtures Induced by Non-Uniform Electric Field
    244Shanenkova Yu., Sivkov A., Ivashutenko A.
    Study of Conditions at Sintering Zinc Oxide Based Ceramics
    245Shanenkov I., Sivkov A., Ivashutenko A.
    Influence of Oxygen Concentration on Plasma Dynamic Synthesis Product in Fe-O System
    247Dyachenko D.I., Kravchenko A.A., Kokorina D.V.
    Investigation of Titania Nanotube Arrays Obtained from Glycerol Electrolytes
    248Kravchenko A.A., Dyachenko D.I., Vomichev V.T.
    Mediator electrosynthesis of cobalt nanoparticles from ionic liquids
    249Tingaev A.K., Ivanov M.A., Ulanov A.M.
    Evaluation of Influence of Thermal Methods of Metal Separation Cutting on Welding Quality
    250Moller A.B., Kinzin D.I., Levandovskiy S.A.
    Improving the Rolling Technology at Mill 450 OJSC "MMK" to Reduce the Level of Alloying of 09G2S Steel Designed for Strength Class up to 440 Mpa
    251Tulupov O.N., Moller A.B., Sarancha S.Y.
    Increasing the Effectiveness of Long Products Rolling: Modernization of the Stelmor Air Cooling Line to Obtain Sorbitized Wire Rod
    Section 2.2. Innovation and cost-effective use of resources of metallurgy industry
    2Makhotkina E.S., Ponomareva O.S., Kolyada L.G.
    Resource-saving Technology of Recycling of Wastes of Secondary Aluminium Production in a Blast Furnace in the Process of Aluminous Slag Smelting
    4Davydov S.V., Gorlenko O.A.
    Nonwaste Recycling of Nonferrous Metallurgy Slags in Iron Casting
    6Bogatov N.A., Bogatov A.A., Salikhyanov D.R.
    Layered Composite Materials Designed for Higher Corrosion Resistance of Oil Production Equipment
    7Erpalov M.V., Bogatov A.A.
    Research on Metal Forming in Pipe Ends Upsetting Process
    8Makhotkina E.S., Shubina M.V.
    Industrial, Ecological and Resource-efficient Aspects of Vanadium Production and Use of Technogenic Vanadium Sources
    10Свергузова С.В., Святченко А.В.
    Утилизация пыли электродуговых сталеплавильных печей – один из этапов ресурсосбережения в металлургии
    11Senin A.V., Zhuravlev D.L., Ivanov A.V.
    Calculation-Experimental Method of Manganese Losses Control in High-Carbon Ferromanganese Slag
    12Pavlov D.A., Bogatov A.A., Pavlova E.A.
    Modernization of Hot-Rolled Tubes Rolling Method
    13Ismagilova I.A., Suhova N.A.
    Development of Aircraft Engines Industrial Processability Management Mechanism
    14Kalitaev A.N., Tutarova V.D., Shapovalov A.N.
    Effect of Continuous Casting Parameters on Quality of Billets Manufactured by UMMC Steel LLC
    15Golubchik E.M., Medvedeva E.M.
    Analysis of Properties Formation of Etched Pinch-Rolling Tape
    16Znamenskii L.G., Ivochkina O.V., Varlamov A.S.
    Lost Foam Casting with the Use of Recycling and Nanostructured Materials
    17Khabibrakhmanova A., Yugina N., Shulaev M.
    Influence of Biologically Active Substances on Wastewater Treatment Process
    18Tyusenkov A.S., Rubtsov A.V., Tlyasheva R.R.
    Heat Resistance of Certain Structural Steels
    19Kurdiumov V.R., Timofeev K.L., Maltsev G.I.
    The Complex Method of Mine Water Purification
    20Mbelle Samuel Bisong, Makharova S.N., Lepov V.V.
    Heterogeneity Estimation of Low-Cycled Steel Weld Probes
    21Bobkov V.I., Dli M.I., Fedulov A.S.
    Chemical and Technological Thermally Activated Process Research of Roasting Pellets in Dense Bed of Conveyor Indurating Machine
    22Rutskii D.V., Zyuban N.A., Gamanyuk S.B.
    Study of the Hot Top Performance with Various Heat Insulators
    23Vernigorov Yu.M., Gasanov B.G., Baev S.S.
    Magnetic Wave Technology of Grinding Slime Separation
    24Senin A.V., Ryazanov A.G., Zhuravlev D.L.
    Effect of Charge Fractional Composition and the Coke Amount on the Parameters of Manganese Ore Agglomeration
    26Matyukhin V.I., Zhuravlev S.Ya., Goltsev V.A.
    Using Acoustic Energy Field for Reducing Dust Takeaway from the Workspace of Vanyukov Furnace
    27Timofeev K.L., Lebed A.B., Malyutin A.J.
    Deep Treatment of Copper Plant Waste Water Streams with Water Recycling
    28Руцкий Д.В., Зюбан Н.А., Пузиков А.Я.
    Влияние способа утепления и геометрии прибыльной части слитков на химическую неоднородность курпносортового проката
    29Shibakov V.G., Pankratov D.L., Khairullin R.A.
    Systems analysis of process control capabilities for forging accuracy
    30Samoilova O.V., Mikhailov G.G., Makrovets L.A.
    Thermodynamic Analysis of Copper Melt Deoxidation with Lanthanum
    31Vasyukova E.S., Okishev K.Yu., Sozykina A.S., Karlikov A.M., Mirzaev D.A.
    Kinetic Description of (Cr, Fe)7C3 Carbide Precipitation from Austenite in High-Carbon Fe–Cr–C Ternary Alloys
    32Okishev K.Yu., Vasyukova E.S., Grebenshchikova A.G., Sozykina A.S., Mirzaev D.A.
    Isothermal Pearlite Formation Kinetics in High-Chromium Cast Irons without Additional Alloying
    33Гаманюк С.Б., Зюбан Н.А., Руцкий Д.В.
    Исследование влияния режимов раскисления металлического распалава на распределение неметаллических включений
    34Rutskii D.V., Zyuban N.A., Gamanyuk S.B.
    Effect of Semisolid Metal Casting of Large Forging Ingots on Quality of Large-Sized Forgings Produced
    35Chechulin Yu.B., Popov Yu.A.
    Minimizing the Dynamic Loads in Pilger Rolling Mill Forholler
    36Chechulin Yu.B., Pesin Yu.V., Boklag N.Yu.
    Force Interaction of Technological Tool and Elastic-Plastic Link at Large Diameter Tubes Preliminary Forming
    37Sibagatullin S.K., Kharchenko A.S., Potapova M.V.
    Improvement of Charging Regimes for Iron Ore Materials into Bunker of Compact Bell-Less Charging Device (BLT) of Blast Furnace Depending on Burden Conditions
    38Steblyanko V.L., Ponomarev A.P., Efimova Y.Y.
    Features of Plasma-Electrolytic Coatings Formation on Metalware Surface
    39Safronov N.N., Safronov G.N., Kharisov L.R.
    Using Metal Containing Waste of Metallurgy to Get Construction Materials
    40Kolyada L.G., Tarasyuk Е.V., Krylova S.А.
    Modern Packaging Materials for Steel Products
    41Baron A., Palatkina L.V., Gonik I.L.
    Relationship between Dendritic Structure of Grey Cast Iron and Mechanical Poperties of Castings
    42Iyengar S., Bogomolov A., Zhakupov A.
    Heat Treatment of Low-Alloyed Steel up to Grade Q125
    43Khazieva E.B., Sviridov V.V., Naboychenko S.S., Menshchikov V.A.
    Surfactants Influence on Sphalerite Wetting During Zinc Concentrate Pressure Leaching
    45Alborov A.D., Bosikov I.I., Klyuev R.V.
    Research of Non-Sinusoidal Voltage in Power Supply Systems of Metallurgical Enterprises
    46Danilov S.V., Redikul'tsev A.A., Lobanov M.L.
    Texture of Hot-Rolled Sheet Fe–3% Si Alloy
    48Rogozhnikov D.A., Kolmachikhin B.V.
    Polymetallic Ore Concentration Middlings Nitric Acid Leaching kinetics
    49Alborov A.D., Bosikov I.I., Klyuev R.V.
    Research and Mathematical Modeling of Resistance Furnaces Thermal and Power Performance at Metallurgical Enterprises
    50Rusakov G.M., Kardonina N.I., Redikultsev A.A.
    Relationship between Translation Symmetry and Energy of Twist Grain Boundaries
    51Gavariev R.V., Savin I.A.
    Improvement of Surface Quality of Casting Produced by Casting Under Pressure
    52Danilov S.V., Mustaeva I.A., Golovnin M.A.
    Influence of Hot Rolling Technological Regimeson 6061 Aluminium Alloy Sheet Texture
    53Kapelyushin Y., Roshchin V., Roshchin A.
    Beneficiation of Vanadium and Titanium Oxides by Using Selective Extraction of Iron in Low-Titanium Magnetite Concentrate
    54Bashmakov D.A., Israphilov D.I., Galiakbarov A.T.
    Physical and Mathematical Foundations Describing Crystallization Process of Melt Cooling on a Moving Wall by Fourier Method and Duhamel Theorem
    55Gudkova S.A., Chernukha A.S., Vinnik D.A.
    The Thermal Expansion of Solid State BaFe12O19 and flux Ba0.8Pb0.2Fe12O19 Pellets
    56Lyapina A.R., Borodin S.I.
    Conducting State Expert Review of Projects Based on Building Information Modeling in Russia
    57Novokreshchenova E.A., Borodin S.I.
    Basic Principles and Scorecard of Economic Evaluation Of Building Information Modelling Introduction In Construction Organizations Activities
    58Osipov A.M., Bezgans Yu.V., Lodkov D.G.
    Numerical Analysis of Modes of Induction Weld Deposition of Valve Tappets of Motor Vehicles
    59Kolokol’tsev V.M., Savinov A.S., Tubol’tseva A.S.
    Stressed State of the Shaped Casting under the Impact of Hindered Contraction
    60Toporov V.A., Panasenko O., Nukhov D.S., Bogatov A.A., Pyankov K.
    Computer-Aided Modeling of a Screw Firmware of the Workpiece and Adequacy Evaluation of Solution Results
    61Demidenko L.L.
    Simulation of Power Efficient Cooling Technology for Continuously Cast Bars
    Part 3. Control and automation systems for manufacturing in the industrial production areas
    Section 3.1. Control systems and their industrial application
    1Mitroshin V.N.
    System for Distributed Control of Melt Temperature of Polymer in a Screw Extruder
    5Pavlovskaya O.O., Kondakov S.V., Andreeva A.A.
    Modelling Human Operator Driving High-Speed Tracked Vehicle
    6Shoshiashvili M.E., Shoshiashvili I.S., Kartashova T.P.
    Automatic Control System of Rotary Trencher
    7Bobyr M.V., Nasser Abduldaiem A., Abduljabbar Mohammed A.
    Cooled Cutter Control Algorithm based on Fuzzy Logic
    8Verevkin A.P., Murtazin T.M.
    Situation models correction for real-time processes control based on simplified algorithm
    9En Un Chye, Kupriyanova O.V., Levenets A.V.
    Development and research of models of data transmission systems with adaptation to communication channel status and implementation of “deferred precision” principle
    10Karagodin V.V., Gorin V.A., Smirnov S.V.
    Sequential Supporting Solutions Method in the Linear Oscillating Objects Control Problems Optimized by Processing Speed
    11Karagodin V.V., Polyansky K.A., Ribakov D.V.
    Sequential Supporting Solutions Method Convergence Research in Optimal Processing Speed Tasks
    12Shishlyannikov D.I., Lavrenko S.A.
    Pilot Test Results for Promising Drives of Sucker-Rod Pumping Units
    13BulatovY.N., Kryukov A.V.
    A multi-agent control system of distributed generation plants
    14Maslakov M.P., Antipov K.V., Dobaev A.Z.
    Method of Activity Transition Graphs Conversion into Modified Petri Nets of Technological Processes
    15Azamatov B.N., Kvasov A.I., Azamatova Zh.K.
    Hydrocyclones Set ACS with Variable Geometry in the HAR TPP System
    16Prakhova M.Yu., Khoroshavina E.A., Krasnov A.N.
    System of Automatic Hydrate Growth Inhibitor Supply to the Gas Field Flowline
    17Prakhova M.Yu., Khoroshavina E.A., Krasnov A.N.
    Cognitive Model-based System of Optimal Control of Methanol Supply to the Flowline
    19Efanov D., Osadtchy G., Sedykh D.
    Protocol of Diagnostic Information Transmission via Radio Channel Concerning Health Monitoring of Russian Rail Roads Infrastructure
    22Gorkavyy M.A., Gorkavyy A.I., Solovyov V.A.
    Conceptual model of intelligent system supporting situation evaluation, forecast and control at power grid companies
    25Кузнецова О.А.
    Оптимальные законы управления механизмами крановой тележки с гибкой подвеской груза
    28Eremenko Y.I., Glushchenko A.I., Fomin A.V.
    On PI-controller Neural Tuner Implementation in Programmable Logic Controller to Improve Rejection of Disturbances Effecting Heating Plant
    29Barankova I.I., Mikhailova U.V., Lukianov G.I.
    Company Railway Transport Control Automation
    30Kudryashov A.V., Fedorov V.B., Popov E.A.
    Automated Lighting Control System for Workplaces Equipped with Displays
    31Petrov Yu.S., Maskov Yu.P., Sakhanskiy Yu.V.
    Generalized Matrix Analysis of Electric Firing Circuits
    32Spasennikov V.V., Kondratenko S.V., Kuzmenko A.A.
    Methodology of evaluation of operators’ activities in man-machine systems with color estimates
    37Savin S.I., Vorochaeva L.Yu.
    Nested Quadratic Programming-based Controller for Pipeline Robots
    38Savin S.I., Vorochaeva L.Yu.
    Pace Pattern Generation for an Pipeline Robot
    40Podivilova E., Shiryaev V.
    Application of Model and Process Features in Set-valued Dymamical System State Estimation
    41Kudryashov A.V., Kalinina A.S., Yagovkin G.N.
    Pulse Width Modulated LED Light Control and Vision Adaptation
    42Dem'yanov D.N.
    Analytical synthesis of reduced order observer for estimation of the bilinear dynamic system state
    43Scherbakov A.V., Rodyakinа R.V., Demidov A.N.
    Development of Beam Current Local Regulator in Additive Electron Beam Process Control System
    46Khakulov V.A., Ignatov V.N., Karyakin A.T.
    Revisiting Justification of the Concept of the Robotic Mining Excavator
    47Khakulov V.A., Ignatov V.N., Khakulov V.V.
    Open Pit Mining Robotization
    49Susarev S.V., Gubanov N.G., Melnikov E.V.
    Information Systems Analysis and Design Intelligent Techniques for Monitoring of the Inductive Inference Based Large-scale Infrastructural Objects Status in Categorical Models Systems
    50Susarev S.V., Gubanov N.G., Steblev Yu.I.
    Development of Intelligent Hardware and Software Monitoring Complex Structure for Lingering Objects in Real-Time Mode
    51Borodin M.U., Bliznik M.G., Smolyanv I.A.
    On the Possibility of Spectral Method Using for Synthesis of Mechanical Engineering Electric Drive Control Systems
    52Cherny S.P., Soloviev V.A.
    Another Approach to Enhancement of Fuzzy Controller Intellectual Capabilities
    53Kuzishchin V.F., Merzlikina E.I. Hoang Van Va
    PD and PDD algorithms with integrating object: tuning on the basis of approach to suboptimal algorithm
    54Gordeev B.A., Plekhov A.S., Titov D.Y.
    Electromagnetic Field Mathematical Model to Control the Magnetorheological Damper
    55Gordeev B.A,. Plekhov A.S., Titov D.Y.
    Magnetorheological Transformer Physical Model
    56Egorov S.V., Perepelkina S.Yu., Akhmedov A.A.
    Technological Cell Design for Agricultural Products Storage
    57Khadanovich D.V., Shiryaev V.I.
    Adaptation of guaranteed state estimation algorithm to anomalous measurements
    59Abakumov A.M., Antropov V.Y., Randin D.G.
    Electrotechnical Vibration Isolation System with a Magnetorheological Damper
    61Ryabchikov M.Yu., Ryabchikova E.S.
    Optimizing Control System Based on Integration of Competing Search Optimization Algorithms
    62Ryabchikov M.Yu., Burnashev R.E., Ryabchikova E.S.
    Modernization of Modular Transportable Сrushing and Grading Complexes Automation Systems
    64Lazarenko Kostoglotov Pugachev I.V.
    Terminal Controls Synthesis Method for the Gibbs Function Use
    65Lazarenko S., Kostoglotov А., Derabkin I.V.
    Identification of Design Parameters Using the Combined Maximum Principle and the Decomposition Principle
    66Shelihov E.S., Chernousova A.M., Vasilevykh S.L.
    Automatic Correction Control Program Method Realization of the CNC Machine Tool under Industrial Conditions
    69Andreev S.M., Parsunkin B.N.
    Billet Heating Control Fuel-saving Solution in the Rolling Mill Furnace
    70Filaretov V., Yukhimets D., Subudhi Bidyadhar
    Information-Control System for Cooperative Control of a Mobile Robots Group
    71A.S. Karandaev, B.M. Loginov, A.A. Radionov, V.R. Gasiyarov
    Setting Automated Roll Axial Shifting Control System of Plate Mill
    72V.R. Khramshina, V.R. Gasiyarov, A.S. Karandaev, A.G. Shubin
    Method of Reduction of an Edging and Horizontal Rolls Electromechanical Systems Interrelation in Universal Stand of a Rolling Mill
    73V.V. Shokhin, O.V. Permyakova, E.A. Khramshina, V.R. Khramshin
    The Use of Frequency Characteristics for Interconnected Drive of a Rolling Mill Modes Research
    74Bochkarev I.V., Khramshin V.R.
    Development of System for Control of Reversible Electric Drive Friction-Plate Electromagnetic Clutch
    75Lukichev D.V., Demidova G.L.
    Speed Control in PMSM Drive with Non-Stiff Load and Unknown Parameters Using PI- and Fuzzy Adaptive PID Controllers
    76Elsukov V.S., Lachin V.I., Lipkin S.M.
    Controlling functionally undefined nonlinear objects with random relative order and unstable equilibrium state
    78Muravyova E.A., Sharipov M.I.
    Two Fuzzy Controller Synthesis Methods with the Double Base of Rules: Reference Points and Training Using
    79Muravyova E.A., Sharipov M.I.
    Fuzzification Concept Using the Any-time Algorithm on the basis of Precise Term Sets
    81Kazarinov L.S., Kolesnikova O.V., Barbasova T.A., Filimonova A.A.
    Efficiency Evaluation Method for Boilers Performance with a Team-based Breakdown of Outcomes
    82Kazarinov L.S., Shnayder D.A., Kolesnikova O.V.
    Heat Load Control in Steam Boilers
    83Vasilev I., Antonova E.
    Supporting Decision-Making in Organizing Railway Container Terminal Operations
    84Kodkin V.L., Anikin A.S., Baldenkov A.A.
    Experimental Research of Asynchronous Electric Drive with Positive Dynamic Feedback on Stator Current
    85Nikulin O.V., Shabanov V.A.
    Improving Reliability of Drill Rig Electric Drive Control System
    92Korochensev V.I., Zorchenko N.K., Potapenko A.A.
    Analysis of Sonar Navigation Systems in Coastal Zone
    95Kuvshinov G.E., Chupina K.V.
    Automatic Control System for Underwater Autonomous Vehicles Power Supply
    96Burkov A.
    Main Provisions of Theory of Reliability in Relation to Shipboard Electrical Equipment
    97Kuvshinov G., Burkov A.
    Study of Ships Electrification
    98Kiryanova N., Kataev D., Yadykin I.
    Comparison of Two Methods of Power Systems Stability Degree Asessment
    100Lavrinov D.S., Khorkin A.I.
    Laser Triangulation 2D Scanner Signal Processing for Premium Thread Pitch Measurement
    101Ganin P., Moskvin V., Kobrin A.
    Redundant Industrial Manipulator Control System
    105Polyanina A.S.
    Control Parameters for Processes of Amplitude Stabilization in the Vicinity of Orbital-Stable Limit Cycles
    106Zhirabok A., Shumsky A., Bobko E., Zuev A.
    Реконфигурация системы с дефектами на основе логико-динамического подхода
    107Klyuev R.V., Bosikov I.I., Kelekhsaev V.B.
    Method for Determining of the Ventilation Object Transfer Function According to Normal Operation (by the Example of Mining and Processing Complex)
    108Klyuev R.V., Bosikov I.I., Kelekhsaev V.B.
    Development of Indicators for Performance Functioning Natural-Industrial System Evaluation at the Mining and Processing Complex Using the Analytical Hierarchy Method
    110Ishmatov Z., Polyakov V., Plotnikov Iu.
    Robust currents control in the electric drive
    111Fomin A.А.
    Microgeometry of surfaces after profile milling with the use of automatic cutting control system
    113Tyutikov V.V., Voronenkova A.A.
    Analytical Synthesis and Analysis of Industrial Facility Control System Versions
    115Martinov G.M., Kozak N.V., Nezhmetdinov R.A.
    Implementation of Control for Peripheral Machine Equipment Based on the External Soft PLC Integrated with CNC
    116Лемешко М.А., Волков Р.Ю.
    Анализ адаптивных машин с двумя связанными рабочими движениями исполнительного органа
    117Vishnevskiy A.A., Yasoveev V.Kh., Khasanov Z.M.
    Correction of dynamic errors of fiber-optic pressure sensor based on dynamic reflexive transformation method
    118Kovalev I.A., Nikishechkin P.A., Grigoriev A.S.
    Approach to Programmable Controller Building by its Main Modules Synthesizing Based on Requirements Specification for Industrial Automation
    120Dubovik S., Kabanov A.
    Quasipotentials in Synthesis of Control Systems Based on Knowledge
    122Galiullin L., Valiev R.
    Diagnostics Technological Process Modeling for Internal Combustion Engines
    124Bolotin I.V., Egorov U.N.
    Synthesis of structures of automatic control systems engineering muscles
    127Филаретов В.Ф., Коноплин Н.Ю., Коноплин А.Ю.
    Разработка и испытание информационно-управляющей системы для телеуправляемых подводных аппаратов
    128Filaretov V.F., Konoplin N.Yu., Konoplin A.Yu.
    Approach to Creation of Underwater Vehicles Information Control System
    129Samotylova S.A., Torgashov A.Yu., Goncharov A.A.
    Structural identification of soft-sensor of MTBE unit
    130Zemtsov N.S., Hlava J., Frantsuzova G.A.
    Using the Robust PID Controller to Manage the Population of Thermostatically Controlled Loads
    131Filimonova A.A., Barbasova T.A.
    Automated System for Simulation of Electricity Consumption in the Iron and Steel Plant
    133Репецкий В.В.
    Оценка эффективности использования системы управления жизненным циклом изделия на машиностроительном предприятии
    Section 3.2. Industrial mechatronics, automation and robotics
    1Vokhmintsev A., Timchenko М., Karyakina A.
    Real-time Visual Loop-closure Detection using fused Iterative Close Point Algorithm and Extended Kalman Filter
    2Kutlubaev I.M., Zhydenko I.G., Permyakov A.F.
    Construction Basics of adaptive group actuators of anthropomorphic grippers actuating link groups
    3Kolganov A.R., Lebedev S.K., Gnezdov N.E.
    Rational Adjustments of Positioning Systems of Industrial Manipulators
    4Sarvarov A.S., Mikhaylets V.F., Vasil’ev A.E.
    Analytical Study of Underactuated Mechanisms of Anthropomorphic Robotic Gripper
    6Nikolaev A.A., Tulupov P.G., Savinov D.A.
    Mathematical Model of Electrode Positioning Hydraulic Drive of Electric Arc Steel-Making Furnace Taking into Account Stochastic Disturbances of Arcs
    7Nikolaev A.A., Tulupov P.G., Savinov D.A.
    Statistical Analysis of Random Fluctuations of Currents in the Electric Arc Steel-making Furnace for Different Melting Techniques
    8Gubankov A., Gornostaev I.
    Development of method of forming signals for the actuators of manipulators with redundant degrees of mobility
    11Ivanov K.M., Gerasimenko A.V., Lyu G.P.
    Determination of moment for power system separation control action during an out-of-step condition
    12Chernyshev V.V., Arykantsev V.V., Kalinin Ya.V.
    Passive foot control in cyclic walking mechanism
    13Omelchenko Ye.Ya., Belyy A.V., Lymar A.B.
    Angle Setting in a Positional Electric Drive of Robot Devices
    14Makarov A.M., Serdobintsev Y.P., Mushkin O.V., Lapikov M.A.
    Research of the Process of Automatic Gripping of Air-Penetrating Flexible Containers with Vacuum during Sorting of Free-Flowing Products
    16Kruglov S.P., Kovyrshin S.V., Kovaleva N.S.
    Optimization of Material Handling at the Automatic Warehouse Based on the Adaptive Control Algorithm
    17Lavrentyeva M.V., Chimitov P.Ya.
    Implementation of Recognition Algorithm with NXOpen API in Siemens NX
    18Lavrentyeva M., Govorkov A.
    Применение дискретной модели изделия для определения сопряжений элементов конструкции
    19Lavrentyeva M., Chimitov P.
    Реализация алгоритма распознавания средствами NXOpen API в среде САПР Siemens NX
    20Veselov G.E., Sklyarov A.A., Ovsyanikova Ju.D.
    Attractor-repeller Method of Mobile Robots Control for Obstacle Avoidance
    21Дмитриев И.Ю., Ельяшевич Г.К., Иванов В.П.
    Принципы построения искусственных мышц на основе набухающих полимеров
    22Pozhbelko V., Kuts E.
    Structural synthesis and analysis of multiple-jointed mechanical systems and industrial application for robot manipulator
    23Karali Patraa, Amit Jha, Tibor Szalay
    Tool Сondition Monitoring in Micro-drilling Using Vibration Signals and Artificial Neural Network
    27Drovnikov A.N., Menshenin S.E., Mienshenina E.A.
    Working out and Investigating the Manipulator for Constructive Work
    31Filaretov V.F., Konoplin A.Yu., Konoplin N.Yu.
    Разработка и экспериментальное исследование метода оценки рельефа донной поверхности для автоматического взятия проб грунта подводным роботом
    32Konoplin Al.Yu., Konoplin N.Yu.
    System for Automatic Soil Sampling by Underwater Vehicle
    33Filaretov V., Gubankov A.
    Synthesis of an Adaptive Speed Control System for a Mechatronic Complex
    34Filaretov V., Gubankov A.
    Adaptive Speed Control System for End-Effectors of Multilink Manipulators
    35Voinov I.V., Kazantsev A.M., Nosikov M.V.
    A Navigation System of Mobile Robot, Based on Bearing Measurements of Beacons
    36Voynov I.V., Telegin A.I., Timofeev D.N.
    Synthesis of Robot Manipulators with Specified Properties
    Section 3.3. Electric power systems and renewable energy sources
    3Sharygin M.V., Kulikov A.L.
    Automatic Control System of Power Supply of Active Consumers
    4Fayda E.L., Sivkova A.P., Nikonova T.Y.
    Self-adjusting Air Temperature Control System in Residential Accommodation with Electric Heating
    5Shpiganovich A.N., Shpiganovich A.A., Fedorov O.V.
    Concerning the Opportunity of Fail-safe Systems Development
    6Kravets A.G., Kanavina M.A., Salnikova N.A.
    Development of an Integrated Method for Placement of Solar and Wind Energy Objects in the Lower Volga
    8Vikharev A.P., Repkina N.G., Pleshkova T.A.
    Express Analysis of Changes in Amount of Deflection of Overhead Power Lines
    9Vikharev А.P., Repkin D.А., Repkina N.G.
    Thermal Calculation of Covered Conductor for Overhead Lines
    10Chernyshov Maxim Zvyagintsev Yegor Nadym
    Мониторинг качества электроэнергии в распределительных сетях 0,4 кВ
    13Biryulin V.I., Gorlov A.N., Kudelina D.V.
    Fuzzy Modeling of Effeciency of Energy and Fuel Resource Use at Regional Level
    15Ryzhkova Y.N., Tsyruk S.A., Matyunina Yu.V.
    Control of Resistive Neutral Grounding based on the Smart Grid Principles
    17Makulov I.A., Alitdinov A.E.
    The Equipment and Application Features of Induction Heating in Oil and Gas Industry
    18Konovalov Y.V., Nurbosynov D.N.
    Optimization of Power Supply System Reactive Power Compensation at the Oil Field Electrical Substation
    19Perekopnaya Y.A., Resh A.G., Gribanov A.I.
    Combined Heating Unit for Heat-Transfer Fluid
    20Osintsev K.V., Zhirgalova T.B., Khasanova A.V.
    Operation Principles of Gas Turbine Generator
    21Ryspayeva M.K., Ryspayev K.S., Kirpichnikova I.M.
    Проблемы использования ветровых установок на территории Республики Казахстан и их решение
    24Toropov E.V., Lymbina L.E., Khasanova A.V.
    Way of electricity generation
    26Grigoryev A.V., Malyshev S.M., Zaynullin R.R.
    Unified Ship Power Grids with Alternators and DC Power Distribution
    27Sheludko V.N., Belskii G.V., Grigoryev A.V.
    Issues of Electromagnetic Compatibility of Electric Equipment on Ships with Electric Propulsion Systems
    28Orlov A.I., Volkov S.V., Savelyev A.A.
    Operation of the Electric Main Multiphase Load Balancing Unit
    29Biryulin V.I., Gorlov A.N., Kudelina D.V.
    Evaluation of Normative Values of Slow Voltage Variations
    30Efimov N.N., Papin V.V., Kurnakova N.Yu.
    Method of Calculating Compact High-Performance Accumulator For Multifunctional Heat Station Based On Cascade Heat Pump System
    32Rozhentcova N.V., Ganin P.V., Rudakov A.I.
    Structural and computer optimization model of a solar-wind hybrid electrical system in the software environment Matlab Simulink
    33Sheryazov S.K., Ptashkina-Girina O.S.
    Estimation of Renewable Energy Resources for Heat Supply Systems
    34Rudenko N.V., Ershov V.V., Evstafiev V.V.
    Improvement of ecological and resource-consumption properties of hybrid power supply plants of mobile base stations
    35Bessolitsyn A.V., Golgovskikh A.V., Novikov A.V.
    Experimental Study of Current Error of up to 50 Hz Current-measuring Transformer
    36Komyakov A.A., Cheremisin V.T., Erbes V.V.
    Simulation of Power Consumption in Railway Power Supply Systems with of Artificial Intelligence Aids
    37Filatova G.A., Shuin V.A., Shadrikova T.Yu.
    Comparison of Electrical Variables of Transient Process for Earth-to Ground Fault Location in Medium Voltage Cable Networks
    39Patrashkin E.A., Andreev A.N.
    IEC-61850 Use in Central Relay Protection and Automation Network Systems
    40Shestakova A.L., Kirpichnikova I.M.
    Study of Russian Law Trends related to Energy Efficiency and Saving based on Renewable Energy Sources
    41Sheryazov S.K., Obukhov S.G., Shelubaev M.V.
    Renewable Sources in System Distributed Generation
    42Zasypkin A.S., Shchurov A.N.
    Optimization of Discrete Control of Rectifier Unit for Ice Melting
    43Savina N.V., Myasoedov Y.V., Myasoedova L.A.
    Intellectualization of Urban Power Distribution Networks
    44Dar’enkov A.B., Guzev S.A., Fedorov O.V.
    Autonomous power plant with variable speed based on multi-windings generator
    45Gracheva E.I., Naumov O.V.
    Research of Processes On Contact Surfaces of Low-Voltage Switching Devices
    46Krasnykh A.A., Krivoshein I.L., Kozlov A.L.
    Research of single-phase faults in 6-35 kV branched overhead distribution network
    47Suslov E.A.
    Step Voltage Signalling Device
    49Smirnov A.A., Malugin S.A., Bakanov A.V.
    Designing Integrated PV Facility with Dual-Axis Solar Tracking System Mounted on the South Building Face
    51Belsky A.A., Dobush V.S.
    Autonomous Electrical Heating Facility Supplied by Wind Turbine for Elimination of Oil Wellbore Paraffin Deposits
    52Korzhov A.V., Sapozhnikov S.B., Ignatova A.V.
    Variation of Dissipative Properties of 6 (10) kV Cable Insulation as a Supplementary Diagnostic Criterion
    53Panova E.A., Khramshin V.R.
    Modelling Variable Frequency Drives as Part of Complex Load for Grid Unbalanced Mode Computation
    54Karandaev A.S., Kornilov G.P., Kondrashova Yu.N.
    Force limiting at roll axial shifting of plate mill
    55Nadtoka I., Firuz Makhmaddzonov, Vyalkova S.
    Maximal Electrical Load Modeling and Forecasting for the Tajikistan Power System Based on Principal Component Analysis
    56Tsygulev N.I., Khlebnikov V.K., Shelest V.A.
    Algorithm for Selection of Automatic Voltage Regulator Setting to Reduce Power Losses
    58Sidorova V.T., Karchin V.V.
    Method for Identification of Break Points in 35 kV Complex Overhead Distribution Networks
    59Kolosok I., Tikhonov A.
    Identification of Parameters of the FACTS Models for Power System State Estimation
    61Lachin V.I., Solomentsev K.Yu.
    Increase in High-speed Performance of Electrical Network Parameters Measurement
    62Shelest V.A., Tsygulev N.I., Khlebnikov V.K.
    Ground fault current calculation and analysis programme
    63Korkina E., Kolosok I.
    Анализ кибер-устойчивости ПВК оценивания состояния ЭЭС на основе метода дерева отказов
    64Konesev S.G., Khlyupin P.A., Kondrat’ev Е.А.
    Индукционные технологии в вопросах добычи высоковязкой нефти Тазовского месторождения
    66Andreev A.A., Vozmilov A.G., Kalmakov V.A.
    Development of the Experimental Assembly for Studying the System Maintaining Battery Optimal Temperature
    68Greshnyakov G.V., Korovkin N.V., Silin N.V.
    Magnetic Shields Special Design for Power Cables
    69Kinsht N.V., Petrunko N.N.
    Integrated Partial Discharges Picture Interpretation as a Set of Interrelated Processes
    71Silin N.V., Ignatev N.I., Kalmykov D.V.
    Advanced Electromagnetic Control Method of Transformer Equipment
    73Kobzar A.V., Babenko G.S., Turchanovich N.N.
    Performance Potential of Energy Savings Using Solar Energy in Heat Supply Systems for Buildings in the Primorsky Krai
    74Chernenkov V., Makarov D., Likhachev I.
    Theoretical Prerequisites for Vortex Pipes Use with the Purpose of Fluid Temperature Potential Increase
    75Chernenkov V., Makarov D., Likhachev I.
    Determination of Strains and Loads of Underground Hot-water Systems Constructed without Canals
    78Matveev A., Shcheklein S., Pahaluev V.
    Determination of Heat-transfer Agent Consumption and Efficiency of a Thermosyphon Water-heating System with the Flat-plate Solar Collector
    80Kasharin D.V.
    Using biopositive constructions made of composite materials in water and electricity supply for recreational facilities
    81Goman V., Fedoreev S.
    Autonomous Wireless Current Sensor
    82Vakhnina V.V., Kuvshinov A.A., Chernenko A.A., Kretov D.A.
    Power Grid Configuration Influence on the Geomagnetically Induced Currents Value in Power Transformers
    84Basmanov V.G., Vtyurin A.V., Kholmanskikh V.M.
    Estimating the Condition of 6-10 kV Cable Lines with Impregnated Paper Insulation According to Their Length and Operational Reliability
    85Koshkin I., Kushnir V., Benyukh O.
    Simulation of 6 (10) kV Electrical Networks for Fault Location
    87Ershov A.M., Khlopova A.V., Sidorov A.I.
    The Results of Power Grid Research Modes in Case of 6-10 kV Overhead Lines Phase Wire Breakage
    88Bakshaeva N.S., Suvorova I.A., Cherepanov V.V.
    Voltage Quality Improving in Power Distribution Networks with Abruptly Variable Load by Application of Reactive Power Series Compensation Devices
    89Derendiaeva L.V., Zakalata A.A., Ojegov A.N.
    Application of Equivalenting Method for Electric Power Grid Subsystems in Calculating the Higher Harmonics Mode
    90Lazukin А.V., Shurygin D.А., Krivov S.А.
    Control Characteristic Selection at SDBD Plasma Unit Long-term Operation
    91Gizatullin F.A., Khakimyanov M.I., Khusainov F.F., Shafikov I.N.
    Analysis of Losses in the Cable Line of Well Submersible Electric Motor
    92Cherepanov V.V., Kalinina Е.А.
    Calculation of Voltage Vibrations and a Short-Term Flicker Indicator Arising up During Working of Asynchronous Engines with Abruptly Variable Loading
    93Klimova T.G., Nikolaeva O.O., Temkina R.V.
    Phasor Measurement Units Use to Determine Automatic Excitation Controller Parameters of a Synchronous Generator
    94Andreenkov E., Shunaev S.
    Sensor Design for the Diagnostic System of Hanging Isolated Power Grids
    97Ivanov I., Avlasenko I.
    Water and biofuel application strategy for combustion process in thermal power plants
    98Savvatin M., Klimova T.
    Localization Sources for Low Frequency Oscillations with Different Origin on Synchronized Vector Measurements
    99Vinogradov K.M., Bufetova I.
    Energy saving in the modernization of street lighting
    100Goman V., Fedoreev S.
    Automated Information-measuring Non-commercial Power Metering System Based on Autonomous Wireless Current Sensors
    101Munts V., Volkova J., Ershov M.
    Solid Oxide Fuel Cell Power Unit with Partial Oxidation Reforming Performance Evaluation
    102Gudkov A.V., Dadonov D.N., Krotkov E.A.
    Research Features of Voltage Static Load Characteristics in Electric System of Russia
    103Gudkov A.V., Dadonov D.N., Krotkov E.A.
    Thermal Wear of Cable Lines Insulation Research due to Current Flow of High Harmonics at Oil Extraction Electrical Generating Systems
    104Kuznetsov A.A., Lavrukhin A.A., Kuznetsova M.A.
    Schemes and problems of SCADA System for electrical energy control on railway rolling stock
    105Kireev P.S., Nagay I.V., Nagay V.I.
    Mathematical Model of an Arc Column Taking into Account Thermodynamic Processes in the Damaged Equipment
    106Nagay I.V., Nagay V.I., Sarry S.V.
    Three-phase Short Circuit through an Electric Arc in the 6-10 kV Unbalance Switchgear
    107Martyanov A.S., Korobatov D.V., Solomin E.V.
    Simulation Model of Public Street Lighting Provided by a Photovoltaic Converter and Battery Storage
    109Isakov R., Ferenets A.
    Research of Remote Backup Protection Functioning at the Software and Hardware Complex RTDS
    110Isakov R., Davletbaev A., Suleymanova N.
    Observability of Electric Power Networks Factoring in (n-1) Security
    111Volovich G.I., Kirpichnikova I.M., Topolskiy D.V.
    Experimental Operation of the Adaptive Electronic Instrument Transformer of Current and Voltage
    112Topolskiy D.V., Topolskaya I.G., Sirotkin E.A.
    Improvement of Efficiency of Information Exchange between a Digital Substation and a Grid Control Centre
    113Zatsepina V.I., Zatsepin E.P.
    Redundancy in Power Supply systems of Mining Enterprises under the Influence of Negative Factors
    114Elistratov V., Denisov R.
    Justification of Wind Turbine Operation and Management Modes for Russian Arctic Conditions
    115Elistratov V., Konischev M., Fedorov M.
    Optimization of Power Supply of the Circumpolar Territories on the basis of Renewable Energy Sources
    116Fedorov O.V.
    Expeditious Forecasting of Power Consumption
    117Kuznetsov K., Zakirova A., Averyanov U.
    Specific Energy of 50 Hz Electromagnetic Field
    118Kirpichnikova I.M., Volkova O.S., Maliugina A.A.
    Combined Lighting System Energy Efficiency Evaluation by the Light Flux Regulation
    119Ufa R.A., Vasilev A.S., Suvorov A.A.
    Development of Hybrid Model of B2B HVDC
    Section 3.4. Power electronics, electrical machines and drives
    1Dudkin M.M., Brylina O.G., Ponosov D.A.
    Adaptive Thyristor Voltage Converter for a Smooth Start of Induction Motors Supplied by Stand-Alone Power Plants
    2Burkov A.P., Krasilnikyants E.V.
    Re-examination to Adjustment the Rotor Magnetic Field Observer in the Induction Motor
    3Shprekher D.M., Babokin G.I., Kolesnikov E.B.
    Parameter Control and Forecast for Electric Drive Parameters of Cutter-Loader
    5Kopylova L.G., Tararykin S.V., Tikhomirova I.A.
    Structural and Parametric Synthesis of Astatic Control Systems for Electric Drives based on Separation of Harmonic Load Torque Model
    7Susdorf V.I., Кuzmin R.V., Galamaga K.V.
    Control Correlation when Adjusting Parameters of Microhydroelectric Power Plant at Variable Load
    8Susdorf V.I., Min Thu Aung, Meshkov A.S.
    Design of Series-Wound Motor Control
    9Vasilyeva M.A.
    Equipment for Generating Running Magnetic Fields for Peristaltic Transport of Heavy Oil
    10Belousov E.V, Zhuravlev A.M.
    Evaluation of Limit Regulation Values for Positional Electric Drive in a System Equipped with Cycloconverters
    11Denisov V.A., Tretyakova M.N.
    Синтез нелинейной коррекции позиционного электропривода
    12Domanov V.I., Vladimirovna G.S.
    Operation Analysis of the Induction Motor Coordinated Rotation Control System
    14Ismagilov F.R., Vavilov V.E., Sayakhov I.F.
    Adaptive Wings Applicalion Problem
    15Tikhonova O.V., Malygin I.V., Plastun A.T.
    Electromagnetic Calculation for Induction Motors of Various Designs by “ANSYS Maxwell”
    16Litovets A.V., Serikov A.V., Serikov V.A.
    Energy Efficiency Increasing for the Power Transformer by means of the Liquid Heating Unit
    17Vasilev B.U., Kozjaruk E.A.
    Research Methods of Increase Efficiency Algorithms Pulse Width Modulation for Semiconductor Inverter
    18Abakumov A.M., Stepashkin I.P.
    Research of the Adaptive Automatic Control System at the Natural gas Air-Cooling Unit
    22Bogdan A.V., Barakin N.S.
    Asynchronous Generator Mathematical Model for of Asymmetrical Modes Calculation
    23Vecherkin M.V., Sarvarov A.S., Makarov A.V.
    Transient Moment Oscillating Component Assessment and Choice of Net Switchover Time at Reactor Start of High-voltage Induction Motor Drives
    24Bogdan A.V., Tropin V.V.
    Analysis of Transient Start Asynchronous Motor Series Compensated Reactive Power
    26Eremenko Y.I., Glushchenko A.I., Petrov V.A.
    Neural Tuner Based Adaptive Control System Development to Improve Roll Bite Process Effectiveness
    29Kubango B.E.M., Kashaev R.S.
    Управление электроприводами скважин по ЯМР-параметрам скважинной жидкости
    31Oskin S.V., Didych V.A., Vozmilov A.G.
    Key Ways of Energy Saving in Pump Units for Melioration and Irrigation Systems
    32Dmitrieva O.S., Dmitriev A.V., Patrakova G.R.
    Evaluation of the Cooling System Calculation Technique for Oil-Immersed Transformers
    33Metelkov V.P., Braslavskiy I.Ya., Kostylev A.V.
    Some Peculiarities of the Simulation of Electric Drives with Random Mode Loading
    34Djabasova D.N., Ovsyannikov V.N., Starikov A.V.
    Analog prototype of the fast response servo drive with asynchronous motor
    35Metelkov V.P., Ziuzev A.M.
    On an Estimate of the Rotor Winding Temperature at Start-up of High-voltage Induction Motors
    36Kurnosov D.A., Voronin S.G.
    Analysis of the Phase Control of Synchronous Electric Motor with Permanent Magnets
    38Merzlov V.S., Khatagov A.Ch., Kryzhanovskaya I.V.
    Frequency Doubler with Phase Selection of Ribbon Beam Electrons
    39Chernyshev A.D., Lisovskaya T.A., Lisovskiy R.A.
    Comparative Analysis of Different Electrical Motor Types as a Traction Drive Part in Electrical Transmission
    40Funk T.A., Grebnev A.I., Sabel'nikov A.A.
    Mathematical Description of Sensorless Pulse-vector Control System of Asynchronous Motor at Constant Voltage Supply
    41Klinachev N.V., Sogrin A.I., Kuleva N.Yu.
    Rational topology selection for the high-performance semiconductor converter’s power bus
    42Sarapulov F.N., Sarapulov S.F., Smolyanov I.A.
    Compensated Linear Induction Motor Characteristics Research by Detailed Magnetic Equivalent Circuit
    43Solodkiy E.M., Varzanosov P.V., Belonogov A.V.
    Induction Motor Sensorless Vector Control with an Adaptive Speed Observer and Direct Electrical Angle Correction in Coordinate Transformations
    44Dar’enkov A.B., Smirnov A.Yu., Zimin A.Yu.
    Vibration Dampers Simulation Tests on Experimental Setup
    45Pugachev A.A.
    Efficiency Increasing of Induction Motor Scalar Control Systems
    46Bychkov A.E., Zheltov A.S.
    Speed Coordinated Electric Drives in the Woodworking Machines
    48Moshkin V.I.
    Pulsing Linear Electromagnetic Motor Mechanical Work within the Desaturated Magnetic System
    49Ptakh G.K., Zvezdunov D.A., Yakovenko A.E.
    Switched Reluctance Drive of Draglines ESH 20.90 Main Machinery
    50Konesev S.G., Khazieva R.T., Kirillov R.V.
    Multifunctional Integrated Electromagnetic components Work Modes in Push-pull Converters
    51Grachev P.Yu., Bazarov A.A., Tabachinskiy A.S.
    Compact Windings Design for Traction Induction Motors and SCIGs
    52Chupina K.V., Usoltsev V.K.
    Fuzzy Control Electric Drive for a Vessel Descent-Rise Device
    53Arzhanov K.V., Shurygin Y.A.
    Energy Efficient Stepper Drives for CNC machines
    54Grachev P.Yu., Strizhakova E.V., Tabachinskiy A.S.
    Starter-Generator Design and Analysis of Start/Stop Processes for HEVs
    55Volkov D.V., Stashinov Yu.P., Shurygin D.N.
    Automatic Load Distribution in Multi-motor Electric Drives
    56Usynin Yu.S., Sychev D.A., Imanova A.A.
    Energy Saving in Electric Drives of Pilgering Mills
    57Pugachev A.A., Kosmodamianskiy A.S., Strekalov N.N.
    Comparative Assessment of Thermal Processes in Frequency Converters
    58Lopatkin N.N.
    Voltage Quality Comparison of Space Vector PWM Voltage Source Multilevel Inverter under Symmetric and Nonsymmetric Switching Sequence Variants: Voltage Waveforms, Spectra and THD
    59Lopatkin N.N., Zinoviev G.S.
    Voltage Quality Comparison of Space Vector PWM Voltage Source Multilevel Inverter under Symmetric and Nonsymmetric Switching Sequence Variants: Voltage Harmonics Integral Factors
    63Shtym A., Zhurmilova I.
    Ground Heat Exchangers of Geothermal Heat Pumps and Analysis of their Constructive Features and Types
    64Zhurmilova I., Shtym A.
    Thermophysical Properties of Low-potential Geothermal Energy System Hole Fillers
    66T.R. Khramshin , G.P. Kornilov, R.R. Khramshin
    Three-Level Inverter-Fed Direct Torque Control of the Synchronous Motor
    67Tiapkin M., Volkov S., Tiapkin G.
    Selection of Three-Level Low Voltage Inverter Circuit Topology for a High Speed Electric Drive
    68Ivanov A.S., Nusratov P.R., Stepanov V.M.
    Use of the Fourth Industrial Revolution Principles for Switched Reluctance Motors Development
    69Abramovich B.N., Sychev Y.A.
    Hybrid Correction System Adapted for a Variable Speed Drive
    70Antipin A.S., Udintsev V.N., Nazarov S.L.
    Exciter Synchronous Machine Low Power on the basis of High-speed Regulator Current
    71Starostina Ya.K., Sidorov S.N.
    Low-element Diode-transistor Module Use in the Energy Saving Asynchronous Positioning Electric Drive
    73Mugalimov R.G., Mugalimova A.R., Zakirova R.A.
    Feasibility Study of Modernization and Improvement of Asynchronous Engines Energy Efficiency during their Overhaul
    74Polyakov V., Plotnikov Iu., Braslavsky I.
    DC-DC converter Operating Modes as a Part of the Energy Storage System in Frequency-controlled Electric Drives
    75Malarev V.I., Kopteva A.V.
    Borehole Electric Steam Generator Electro-Thermal Calculation for High-Viscosity Oil Productive Layers Development
    76Andriyanov A.I.
    Comparative Analysis of Efficiency of Time-delayed Feedback for Non-linear Dynamics Control of Composite DC-to-DC Power Converters
    77Solovev D.B.
    Improvement of Protective Relaying Efficiency for Motor Drives at Mineral Processing Plants
    78Smolin V.I., Topolskaya I.G., Yakovlev V.А.
    Dynamic Properties of the Asynchronous Motor Electromagnetic System
    79Ahmed M. Omara, Sleptsov M.A.
    Efficient Electric Traction Drive Configuration for Battery Electric Vehicles
    80Husainov Sh.N., Gladyshev S.P., Belousov E.V.
    Mathematical Modeling of the Field Regulated Reluctance Machine and its Limiting Capabilities
    81Chetoshnikova L.M., Buhanov S.S., Gryzlov A.A.
    Analyzing the Problem of Increasing Industrial Electric Drive Reliability
    82Kruglov G.A., Gorozhankin A.N., Bespalov V.Y.
    Calculation methods of electric drives and generators based on the field regulated reluctance machine
    83Kuznecov K.B., Golykov A.D., Gryzlov A.A.
    Specific Weight-size Parameters for the Semiconductor Technology
    84Dementyev Yu.N., Umurzakova A.D., Negodin K.N.
    The Study of the Electric Drive with Indirect Control of the Output Variables of the Asynchronous Motor
    85Abdulveleev I.R., Khramshin T.R., Kornilov G.P.
    Comparison of capacitor voltages balancing methods for cascaded H-bridge STATCOM
    86Kovalev K., Ivanov N., Tulinova E.
    Magnetic Field Distribution in the Active Zone of Synchronous Generators with Electromagnetic Excitation
    87Baskov S.N., Baskova T.V., Litsin K.V.
    Investigation of harmonic composition of non-sinusoidal signal of synchronous motor at vector-pulse start
    88Maklakov A.S.
    Development of mathematical model of 3L NPC BtB converter
    89Maklakov A.S.
    Simulation of 3L NPC VSI with SHE PWM at different switching angles
    90Maklakova E.A.
    Speed Control System Settings of Plate Mill by Bode Diagram
    1168G.Ya. Pyatibratov
    Determination of Maximum Damping Efficiency based on Electric Drive Vibrations of Elastic Mechanisms
    1169G.Ya. Pyatibratov, O.A. Kravchenko, N.A. Sukhenko
    Synthesis of Optimal Efforts Control in Electromechanical Systems with Elastic Mechanical Links
    1197G.Ya. Pyatibratov, A.A. Danshina
    Methodology for Practical Selection of Force Compensating Manipulator Electric Drive
    Section 3.5. Signal processing and real time embedded control
    1Khmara V.V., Kabyshev A.M., Lobotskiy Yu.G.
    Automatic Microprocessor-Based Performance Diagnosis of Capsule Charging/ Discharging Stations of the Pneumatic Transportation System
    3Efanov D.V., Sapozhnikov V.V., Sapozhnikov Vl.V.
    Self-Checking Method for Concurrent Error Detection System Development Based on the Constant-Weight Code “2-out-of-4”
    4Guseva A.I., Malykhina G.F., Militsyn A.V.
    Early fire prevention in the plant
    5Kropotov Y.A., Belov A.A., Ermolaev V.A.
    Transfer Induction Flow Data Networks Packet Random Multiple Access
    6Kropotov Y.A.
    Methods for Acoustic Signals Probability Density Models Estimation in Telecommunications Audio Exchange Systems
    7Margatskaya E.A., Kurnosov D.A.
    Differential Optical Sensor for Measuring Small Linear Displacement
    9Sapozhnikova M.U., Gayanova M.M., Nikonov A.V.
    Nonlinear Filtering Algorithms of Acoustic Signals in Oil Producting Wells
    10Zhevanik R.V.
    Контроль электромагнитных помех в режиме реального времени
    12Fufachev A.S., Sintsov A.V., Luppov A.V.
    Data Compression Techniques for Improving of Performance and Reliability of a Multifunctional Radio Receiving Center
    13Tyncherov K.T., Selivanova M.V.
    Modular wavelet approach for reinforced plastic pipelines operation quality evaluation
    15Krylov S.M., Orlov S.P., Saraev M.V.
    Multifunctional Programmable System-on-Chip for Heterogeneous Signals Processing
    16Bozhokin S.V., Suslova I.B.
    Comparative Analysis of Mathematical Simulating of the Non-stationary Heart Rate Variability in Diagnostic Medical Systems
    17Ibryaeva O., Salov D.
    Matrix Pencil Method for Coriolis Mass Flow Meter Signal Processing in Two-Phase Flow Conditions
    18Grecheneva A.V., Dorofeev N.V., Kuzichkin O.R.
    Positioning of the Goniometric Monitoring System based on the Phase Measuring Principle
    19Yurenko K.I., Fandeev E.I.
    Classification Systems of Automatic Train Driving with Positions of the Modern Automatic Control Theory
    20Proskuryakov A.Y.
    Processing and forecasting of time series in systems with dynamic parameters
    21Yakovleva D., Zhilenkov A., Karpov A.
    Synthesis of the Synchronous Machine Model Operating Natural Stator Windings Phase Signals and Using Generator Catalogue Data
    22Герасимов В.А.
    Реализация цифрового ШМ повышенной разрешающей способности с высокой несущей частотой на ПЛС
    23Gerasimov V.A.
    FPGA-based Implementation of a High Resolution and High Carrier Frequency Pulse-width Modulator
    24Khuzyatov Sh.Sh., Valiev R.A.
    Organization of Data Exchange through the Modbus Network between the SIMATIC S7 PLC and Field Devices
    25Lozin O.I., Kucher A.I., Labadze O.E.
    Accounting For the Object Symmetry at Electric Impedance Tomography Data Processing
    26Yachikov I.M., Nikolaev A.A., Zhuravlev P.Yu., Karandaeva O.I.
    Estimate of Correlation between Transformer Diagnostic Variables with a Time Lag
    27Urakseev M., Vazhdaev K., Sagadeev A.
    Microcontroller Acousto-optical Information-Measuring System for Object Movement Control
    28Zakasovskaya E., Tarasov V., Glushchenko A.
    Information Security Issues in the Distributed Information Measurement System
    29Urakseev M.A., Vazhdaev K.V., Sagadeev A.R.
    Optoelectronic Devices on Traveling and Standing Elastic Waves for Microprocessor Control Systems
    Section 3.6. Modeling and computer technologies
    1Gibadullin R.F., Vershinin I.S., Minyazev R.Sh.
    Realization of replication mechanism in PostgreSQL DBMS
    4Tavaeva A.F., Petunin A.A.
    Investigation of Cutting Speed Influence on Optimality of the Tool Path Route for CNC Laser Cutting Machines
    7Dulesov A.S., Karandeev D.Y., Dulesova N.V.
    Optimal redundancy of radial distribution networks by criteria of reliability and information uncertainty
    9Kargapoltsev S.K., Krakovsky Y.M., Luzgin A.N.
    Non-parametric Classification of Technical Condition Parameters based on Shift and Scale Tests
    11Dolotovskij I.V., Larin E.A., Lenkova A.V.
    Energy Utility System Mathematic Modelling and Optimization at the Hydrocarbon Processing Plant
    12Dezhina I.
    Definition of Strain-Stress State of Soil Ground with Allowance for Elasto-viscoplasticit
    13Khludova M.V.
    Evaluation Model for the Stochastic Flowshop Cyclic Scheduling Problem
    14Pashkovskiy А.V., Tkachev А.N., Bahvalov U.А.
    New standard Element Types for Magnetic Field Calculation in the Electromechanical System
    15Makaeva A.K., Kondratenko T.V., Dunava D.N.
    Исследование нагрева и охлаждения блока с разветвленной поверхностью с помощью алгоритмического моделирования
    16Igizianova N.A., Igizianova A.Y.
    Modeling and Experimental Investigations on Disturbing Currents Potential with a High-Temperature Fluid Field
    17Mikhaylov A.A., Bazuyeva S.A.
    Use of Probabilistic Splitting Distributions of the Original Data During the Sequential Synthesis Problem-solving Algorithm
    18Mikhaylov A.A., Bazuyeva S.A.
    Creation of Messages for the Problem Solving Algorithm
    20Ziganshin Sh.G., Izmailova E.V., Maryashev A.V.
    Technique for Search of Pipeline Leakage According to Acoustic Signals Analysis
    21Tomaev M.H.
    Многокритериальная оптимизация модульной структуры программных систем
    22Potapov L.A., Maklakov V.P.
    Electromagnetic Processes Simulation in the Angular Accelerometer with a Hollow Non-magnetic Rotor
    23Goncharov V.I., Rudnicki V.A., Liepinsh A.V.
    Numerical Form of the Automatic-control System Mathematical Models based on the Real Interpolation Method Approach
    26Anikin I.V.
    Using Fuzzy Logic for Vulnerability Assessment in Telecommunication Network
    27Anikin I.V., Alnajjar Kh.Kh.
    Correlation Immune Pseudo-random Number Generator Based on Fuzzy Logic
    28Ozhiganova М., Kostyukov A.D., Maslova M.A.
    Functional model of firewall application layer protection for web-based information systems
    29Bukeikhanov N.R., Gvozdkova S.I., Nikishechkin A.P.
    Automation of the Technological System “Gas Nitriding – Recycling Processes”
    30Grigorchuk S.E., Krivosheev M.O., Pirozhnikova A.P.
    Generalized Problem Modelling on “Block Indicator” Assignment
    33Litvinov S.V., Trush L.I., Avakov L.I.
    Some Features of Temperature Field Definition in Axisymmetric Problems
    34Chepurnenko A.S., Yazyev S.B.
    Non-stationary Temperature Field Modeling in Electric Cable with PVC insulation
    38Kanukov S.G., Khatagov A.Ch., Soin A.M.
    Virtual Dynamic Objects Designing for Computer Training Complexes
    41Shashkin V.Ju.
    Mathematical Modelling of Heating System Hydraulic Modes
    42Krivonogov A.A., Kartashev A.L.
    Mathematical Model of Transformation Plane Flow to Spatial One
    43Shempelev A.G., Iglin P.V., Tatarinova N.V.
    On Condenser Mathematical Model Method Introduction into Steam Turbine Unit Mathematical Model
    44Filaretov V.V., Gorshkov K.S., Kurganov S.A.
    Multiple Fault Diagnosis in Analog Circuits Using the Indirect Compensation Theorem
    45Lapshin V.L., Glukhov A.V., Rudykh A.V.
    Experimental Studies of Mechano-rheological Model Simulating Shock Interactions
    47Antyasov I.S., Sokolov A.N.
    Impedance Boundary Conditions of Multilayer Enclosing Structures for Electrodynamic Processes Modeling inside an Anechoic Chamber
    50Letavin D.A.
    Small-Size Bandpass Filter in the Form of Two Short-Circuited Meander Lines
    52Orlov G.A., Kotov V.V., Orlov A.G.
    Pipes Fracture Simulation and Changes of Wall Thickness Variation under Internal Pressure
    54Kuzmin V.A., Zagrai I.A., Shmakova N.A.
    Modeling of Thermal Radiation of Combustion Products in the Gas Generator
    57Zvonareva Yu.N., Vankov Yu.V., Onuchin E.M.
    Modelling of the Thermal Network Operational Mode Directed at Increase of Its Power Efficiency
    60Tatarinova N.V., Suvorov D.M., Shempelev A.G.
    Approaches to Building Computational Mathematical Models Based on the Flow and Power Characteristics of Cogeneration Steam Turbine Stages and Compartments
    65Tushev S.A., Sukhovilov B.M.
    Photogrammetric System Accuracy Estimation by Simulation Modelling
    67Kinsht N.V., Kai Wu, Petrunko N.N.
    Partial Discharges and the Problem of Initial Conditions
    68Kuzmin V.A., Zagrai I.A.
    Simulation of thermal radiation from heterogeneous combustion products of peat burning in power plants
    72Boldyrev A.V.
    Simulation of the Pulse Voltage Converter Power Part
    73Alikov A.Y., Kalinichenko A.V.
    Efficiency of Unstructured Text Search Improving Methods in the Electronic Archive of Computer-aided Design Systems
    75Kovalenko A.I., Klimova T.G.
    Synchronous Machine Parameters Definitions by Optimization Methods Use
    77Lvovich I.Ya., Preobrazhenskiy A.P., Choporov O.N.
    Use of the Combined Approach for Diffraction Structures Design with Necessary Values of Scattering Characteristics
    78Dergachyov K.V., Korostelyov D.A., Podvesovskii A.G.
    Computer Simulation of Drop Impingement Erosion of Wet-steam Turbine Blades to Identify the Efficiency of Active Erosion Preventive Measures
    79Starostin N.D., Kurennov D.V.
    Поуровневое приближение к минимальному маршруту
    80Safin R.R., Salimgaraeva R.V., Beliakova E.A.
    Mathematical Modeling of Crushed Wood Thermal Treatment Process
    83Repp P.V.
    Diagnostics and Assessment of the Industrial Network Security Expert System
    85Klinachev N.V., Shaburov P.O.
    Technique for Debugging of the Data Exchange between the PC and Microprocessor-Controlled Electromechanical Systems based on the Modbus RTU Protocol
    88Ventsov N.N., Podkolzina L.A.
    Studying the Effect of Paralleling Settings on the Functioning of a Barcode Recognition App
    91Sidorov O.Yu., Sarapulov F.N., Shvydkiy E.L.
    Ingot Macro Structure Simulation During the Crystallization Under the Traveling Magnetic Field
    92Kashuba V.B., Sitov I.S., Eliseev A.V.
    Mathematical Modelling in Tasks of Control of Vibration Technological Complexes Dynamic State
    93Dar’enkov A.B., Baykov A.I., Gordeev B.A.
    Vibration Dampers Simulation Tests on the Experimental Setup
    94Demidenko L.L.
    Simulation of the Cooling Process of the Continuously Cast Bar with Heat Insulation
    95Chistyakova T.B., Novozhilova I.V., Kozlov V.V.
    Program Complex for Resource-saving Control of the Basic Oxygen Steelmaking Process
    97Bzhikhatlov I.A., Perepelkina S.J.
    Research of Robot Model Behaviour Dependin on Model Parameters Using Physic Engines Bullet Physics and ODE
    98Andreev N.K., Malatsion A.S.
    Multi-frequency acoustic method for cement bond logging based on one-sided excitation and reception of elastic waves from the top of a well
    99Herreinstein A.V., Midonocheva N.S., Mashrabov N.
    Piston Motion Mathematical Model in the Tube Influenced by Burning Gas
    100Petrov M.A., Subich V.N., Petrov P.A.
    Численное исследование инновационного процесса штамповки с кручением
    101Kats E.I., Kitaev A.M.
    On the Approach to CNC Machining Simulation Improving
    105Fedorov E.Yu., Ferenets A.V.
    Computer-aided Design of Vehicle Electrical Harnesses
    149Nikishin K.I., Konnov N.N., Pashchenko D.V.
    Implementation of time-triggered Ethernet using colored petri net
    150Bodyan L.A., Ponomarev A.P., Melnichenko M.A.
    Computer-aided Design and Simulation of Manufacturing Processes in the Packaging Industry
    151Slavgorodskaya D.V., Bugaev V.G.
    Ship Hull Resistance to the Dynamic Ice Body Impact
    154Klinachev N.V., Kuleva N.Yi., Voronin S.G.
    Reduction to relative units and setting the observer of flux linkage vector projections of the stator winding in the synchronous machine with the rotor’s magnetic field
    155Lvovich I.Ya., Preobrazhenskiy A.P., Choporov O.N.
    Simulation of Two-dimensional Periodic Perfectly Conducting Diffraction Grating with the Dielectric Layer
    156Milovzorov D.G., Yasoveyev V.Kh.
    Concept of Information Signals Reforming for the Tilt Measurement Systems with a Triaxial Accelerometer
    160Mashunin Yu.K.
    Concept of Technical Systems Optimum Designing (Mathematical and Organizational Statement)
    161Mashunin Yu.K.??
    Optimum Designing of the Technical Systems Concept (Numerical Realization)?
    162Zamoryonov M.V., Kopp V.Ya., Zamoryonova D.V.
    “Storage Device – Cell – Storage Device” Structure Modeling
    163Zamoryonov M.V., Kopp V.Ya., Zamoryonova D.V.
    Defining Information System Characteristics with account of Different Applications Service Types
    164Frid A.I., Berkholts V.V., Grebnev N.Ju.
    Provision of Secure Access to the Complex Technical Device Lifecycle Support System
    165Dobrzhinskaya T.Y., Dobrzhinskii Y.V., Pankov M.A.
    Diagnostic Modeling of Mixed Analog-digital Systems
    168Tagirova K.F., Vulfin A.M., Ramazanov A.R.
    Data Mining in the Diagnostics of Oil Extraction Equipment
    169Alsheva K.V., Lapin A.P.
    Investigation of the strouhal number in the convertion function for vortex sonic flowmeters
    170Tagirova K.F., Ramazanov A.R.
    Data Warehouse for Intelligent Oil Wells Control Systems
    171Saraev P.V., Pogodaev A.K., Galkin A.V.
    Information Architecture and Analytics Systems with Interval Data Types
    172Lisiyenko V.G., Borodin M.J., Bliznik M.G.
    Welding Arc as a Control Object in Technological Processes
    183Pertsukova U.A., Voronkov V.I.
    Особенности моделирования процесса штамповки листовых деталей эластичной средой
    184Zakharov A., Barinov A., Zhiznyakov A.
    Faces Selection in Images Using the Spectral Graph Theory and Constraints
    185Zakharov A., Barinov A., Zhiznyakov A.
    Human Head Detection Algorithm on Images Using Graph Embedding in the Vector Space
    188Shchuchkin D.A., Khoroshev A.S., Pavlenko A.V.
    Application of GMSH + GetDP Software Suite for Calculation of Non-stationary Electromagnetic Fields of Electrical Devices
    189Korochensev V.I., Zorchenko N.K., Potapenko A.A.
    Methods for Reducing Sonar Equipment Error in the Sea Wedge
    191Korovkin N., Goncharov V., Silin N.
    Ice-Melting ProcessModeling on Transmission Lines
    192Silin N., Korovkin N., Minevich T.
    Simulation of Grounding Devices for Power System Lightning Protection Provision
    194Grekhov L.V., Jianhui Zhao, Xiuzhen Ma
    Fast-response solenoid actuator computational simulation for engine fuel systems
    195Turin O.G., Bezuglov D.V., Khokhlovskiy V.N.
    Компьютерный тренажёр оператора АСУТП производства изделий из высокоэнергетических материалов
    197Russkov O.V., Saradgishvili S.E.
    IT-method for Uneven Energy Consumption Planning
    198Leontev V.V., Saragishvilli S.E.
    Steganography Based on the Hadamard Transform and Modification of the DEMD
    199Davydov R.V., Antonov V.I., Davydova T.I.
    Компьютерное моделирование лазерной абляции металлов для автоматизации подбора параметров лазерного излучения
    203Gurin I.A., Spirin N.A., Lavrov V.V.
    Разработка MES-системы оптимального распределения топливно-энергетических ресурсов в доменном производстве
    205Shikhin V.A., Pavluk G.P.
    Sensitive Boarder Method for Control Performance Indices Adjustment
    207Timerbaev N.F., Ziatdinova D.F., Safin R.G., Sadrtdinov A.R.
    Gas Purification System Modeling in Fatty Acids Removing from Soapstock
    208Spirin N.A., Gurin I.A., Grebneva N.V.
    Компьютерные технологии и средства создания информационно-моделирующих систем для решения технологических задач в металлургии
    211Solodusha S., Orlova I.
    Integral Models of Non-linear Non-stationary Systems and Their Applications
    212Муйземнек О.Ю., Коновалов А.В., Канюков С.И.
    Выбор интерсубъективных решений при назначении напусков на поковки типа валов
    213Korostelyov D.A., Dergachyov K.V., Gulakov K.V.
    Application of Computer Simulation to Identify Erosion-fatigue Properties of Wet-steam Turbine Blades Materials
    214Mokeev V.V.
    Eigenstate Analysis as a Tool for Enterprise Performance Assessing
    216Shleymovich M.P., Medvedev M.V., Lyasheva S.A./i>
    Contour Segmentation based on Image Points Energy Estimation in Object and Processes Control Systems
    217Kachanov A.N., Korenkov D.A.
    Analysis of factors influencing the parameters of the electromagnetic field in wood during HF drying
    219Bannikov D.A., Sirina N.F., Smolyaninov A.V.
    Modelling of technological processes of service maintenance and repairs of rail passenger trains based on graph theory
    221Gurin I.A., Lavrov V.V., Spirin N.A.
    MES Development for Optimal Distribution of Fuel and Energy Resources in Blast-Furnace Production
    222Spirin N.A., Grebneva N.V., Gurin I.A.
    Computer Technologies and Tools for Creation of Information Modelling Systems for Process Tasks Solution in Metallurgy
    223Bormotin K.S., Belykh S.V.
    Numerical Solving for the Problem of Multi-point Forming of Thick Double-curvature Plates in the Creep Mode
    226Stulov A., Tikhonov A., Paikov I.
    Development of Physical Processes Simulation Technology in Power Transformers by means of Ramified Electrical Equivalent Cir
    228Oganyan R., Narakidze N., Shaykhutdinov D.
    Method of Two-stage Complex Diagnostics of Digital Substations on the basis of the Full-scale-model Tests Theory
    229Galkin A., Sysoev A., Saraev P.
    Variable Structure Objects Remodelling based on Neural Networks
    230Panov A.Yu., Kuznetsov S.V., Ivanov S.V.
    Forming a Common Information Space for Mechanical Engineering Cluster Product Life Cycle based on CALS Technologies Principles
    231Moslem Parsa, Meysam Parsa, Fatemeh Jaferi
    Performance Evaluation using Balanced Scorecard (BSC) and Fuzzy TOPSIS
    234Evtushenko S.I., Petrov I.A., Alekseev S.A., Alekseeva A.S.
    Structural Optimization of Stationary Plates of Industrial and Technological Equipment
    235Kosmodamianskiy A.S., Vorobiev V.I., Korchagin V.O.
    Contact Spot For Conformal Interface of the Railroad Locomotive Wheel with the Rail
    236Dema R.R., Kalugina O.B., Tyuteryakov N.Sh.
    Energy Consumption Dependents at Wide-strip Hot Rolling on a Mode Option of Rolls Lubrication Modeling
    237Grzejda R.
    Modelling Nonlinear Multi-Bolted Systems on the Assembly State
    241Gishvarova A.S., Davydov M.N.
    Methods of Accelerated Tests of Turbine Blades in Power Plants Operated under Multicomponent Loading Conditions
    243Gishvarova A.S., Raherinjatovo J.C.
    Parametric diagnostic state of gas turbine power plant
    244Bobkov A.
    Matrix Interpretation of the Results of Flow Visualization in an Impeller Machine Wheel
    246Shleymovich M.P., Medvedev M.V., Lyasheva S.A.
    Контурная сегментация на основе модели оценок энергии точек изображения в системах контроля объектов и процессов
    247Kaftannikov I.L., Plaksina I.G., Topolsky N.D.
    Development of Polysubtitles Video Player for Multilingual Technical Support of Digital Substations Equipment
    248Prokofiev A.O., Smirnova Y.S., Silnov D.S.
    Examination of Cybercriminal Behaviour while Interacting with the RTSP-server
    250Dimitrienko Y.I., Zakharov A.A.
    Computer Technologies for Adaptive Mesh Generation in SIGMA Preprocessor
    251Galich S.V., Deogenov M.S., Semenov E.S.
    Control Traffic Parameters Analysis in Various Software-defined Networking Topologies
    253Zakirnichnaya M.M., Kulsharipov I.M.
    Wedge gate valves selected during technological pipeline systems designing service life assessment
    256Zakasovskaya E., Glushchenko A., Tarasov V./i>
    Construction of Asymmetric Cryptosystems Using Finite Non-commutative Algebraic Groups
    257Zakasovskaya E., Gorenko N., Sinenko P.
    Synthesis and analysis of steganography hidden information by tomographic methods
    258Buhtoyarov V.F., Imanova A.A., Haytov E.S.
    Parallel Calculation Methods Use in Electrotechnical Complexes
    259Buhtoyarov V.F., Imanova A.A., Haytov E.S.
    Modelling Heat and Mass Transfer Processes in Capillary-Porous Materials at their Grinding by Pressure Release
    Section 3.7. Theory and applications of dynamical measurements
    1Шпрехер Д.М.
    Методика мажоритарного допускового контроля технического состояния электромеханических систем в многомерном пространстве признаков
    6Серов А.Н.
    Влияние нестабильности частоты сетевого напряжения на погрешность измерения спектра
    7Serov A.N.
    Frequency Estimation Methods for Stationary Signals
    8Петров М.А., Воронков В.И., Крутина Е.В.
    Измерение вибраций применительно к кузнечно-прессовому оборудованию
    12Malafeev S.I., Tikhonov Y.V.
    Identification of Parameters of Power Line Supplying Excavator in Career
    14Goryunova M.V., Kuleshova L.S., Khakimova A.I.
    Application of Signal Analysis for Diagnostics
    15Zhukova N.S. Dobrinskij D.R. Azarov A.V.
    Reduction of Pollutant Concentrations under Adverse Weather Conditions with Optical Dynamic Measurement Systems
    17Bryakin I.V., Bochkarev I.V., Khramshin V.R.
    Control Speed Movement Long Materials
    19Mironov K.
    Transport by Robotic Throwing and Catching: Accurate Stereo Tracking of the Spherical Object
    20Davydov V.V., Myazin N.S., Davydova T.I., Rud’ V.Yu.
    System of Flowing Liquid Medium Condition Control for Automatic Regulation of Manufacturing Process
    Part 4. Sustainable development of industrial enterprises
    3Kuvshinov M.S., Kalacheva A.G., Butrin A.G.
    Assessment of Investment Appeal of Industrial Enterprises
    4Karelina M.G., Ivanova T.A., Trofimova V.S.
    Statistical Analysis of Integration Activities of Industrial Enterprises as Basis for Russian Regions Development
    5Antyufeev A.V., Ptichnikova G.A.
    Urban Regeneration of Plants’ Territories in Industrial Cities of Russia: a Case Study in Volgograd City
    11Dolotovskij I.V., Larin E.A.
    Theoretical and Practical Aspects of the Synthesis of Optimal Systems of Energy Complex Enterprises for Preparation and Processing of Hydrocarbons
    17Borisova N. I., Borisov A. V., Fedonuk N. I
    Issues Associated with Energy Efficiency Programs Implementation at the housing and utility enterprises
    18Mavlioutov R.R., Butenko E.A., Menyailova R.A.
    Development of Corporate Associations of Construction Industrial Enterprises and Subjects of Financial and Credit Environment by Financial Infrastructure Merging
    20Suvorova L.A., Baibakova T.V., Pestova I.V.
    Evaluating the Efficiency of Functioning of Integrated Structures in Industry
    22Maksimchuk O.V., Pershina T.A.
    Innovative Means of Energy Efficiency Management for Regional Industrial Enterprises
    23Baev L.A., Golikov O.A., Pravdina N.V.
    Modeling the Dynamic Self-Development Mechanism of innovative systems
    24Demchenko A.I., Palamarchuk L.N., Sartasov E.M.
    Automation of Control and Analysis of Execution of Official Duties and Instructions in the Hierarchical Organization
    25Pikalov V.А., Shumova J.V., Shumov А.V.
    Integral Upper-Limit Estimation Method for Assesing Project Design Changes Feasiblity in Industrial Engineering
    29Kalinin P.A., Burtseva T.A.
    Methodical Bases of Perceptual Mapping of Printing Industry Companies
    36Kovalchuk Ju.A., Stepnov I.M.
    About the New Industrial Production Management Concept as the Company Strategy in the Fourth Industrial Revolution
    37Karanina E.V., Selezneva E.Y.
    Problems of Cooperation of the Food Industry Enterprises with their Consumer Market Counterparties in the Kirov Region
    40Demchenko A.I., Astashova Y.V.
    Management of Logistics Chains of Industrial Enterprises in High-Tech Industries
    42Yevdokimov S.I., Meshkov Е.I., Gerasimenko T.E.
    Economic-Mathematical Modelling of Placement of Gold Recovery Factory at the Development of the Group of Territorially Converged Gold Deposits
    43Zambrzhitskaia E.S., Mamaeva A.V., Kozlova T.V.
    Specifics of Generating an Order Portfolio Based on Break-Even Analysis for Iron and Steel Works
    45Say V.M., Sizyi S.V., Gromov I.D.
    Organizational Networks with Self-Standing Interests
    46Gorbunova A.V., Maksimova O.N., Ekova V.A.
    Developing Methods of Controlling Quality Costs
    49Pluzhnikov V. G., Kukharenko S.I., Shikina S.A.
    Application of Multiloop Diagnostics Model to Assess and Improve Enterprise Economic Security
    50Kolbachev E.B.
    Management of Mechanical Engineering Design Processes Based on Product Cost Estimates
    52Aizenberg N.I., Stashkevich E.V.
    A Mechanism for Encouraging Active Consumers to Optimize the Operations of Power Supply Systems
    55Polyanskaya O.A., Bespalova V.V., Sokolova V.A.
    Introduction of a Method for Calculating the Investment Activity of an Enterprise (Evidence from Wood-Processing Enterprises)
    56Sagandykov M.S. Shafikova G.H.
    Salary Administration as Part of Employee Incentive System at Industrial Enterprises
    62Belyaev M.K., Sokolova S.A., Karpushova S.E.
    The Interaction Problems Between Large and Small Business in Modern Conditions
    64Asanov A.Z., Myshkina I.Yu.
    Selection of Executors for Realization of Individual Tasks of the Project
    65Ozernikova T.G., Kuznetsova N.V.
    Lack of Skilled Personnel as Threat to HR Security of Industrial Enterprises
    67Chevychelov S.A., Kotov I.S., Klevtsov S.M.
    Analysis of Alternative Actions for Import Substitution Policy Implementation in Machine Engineering Complex
    75Ganebnykh E., Altsybeeva I., Gurova E.
    Game Based Learning of Lean Manufacturing: Decreasing Personnel Resistance
    79Maksymchuk O., Baulina O., Klyushin V.
    Financial Modeling in Industrial Building with Hierarchies Analysis Method
    81Grabar A.
    Effective Services Promotion Management in Far North (Russia)
    83Malinina T.V., Smolovik S.V., Ivanov M.Y.
    Evaluation of "Direct Input" Effectiveness for Industrial Enterprises Power Supply
    85Васильев С.М., Медведева Л.Н.
    Экономические мотиваторы перспектив инновационного развития дождевальной техники в России
    89Glukhov S.V., Glukhov P.S.
    Leadership Styles and Managerial Culture at Industrial Enterprises with Different Modernization and Innovation Processes
    91Novikova G.Yu., Lukyanitsa M.V., Chizho L.N.
    Program-Oriented Approach to Resource Saving Issues in Construction Materials Industry
    92Ivanov A.E.
    The Genesis of the Russian Mergers and Acquisitions Market: The Role of the Industrial Sector
    93Babanova Y.V., Griazeva-Dobshinskaya V.G., Dmitrieva Y.A.
    Modelling Efficient Innovative Work: Integration of Economic and Social Psychological Approaches
    95Kholkin A.V.
    New Approaches for Identification Factors of Cost Management
    98Rezepin A.V., Amirova T.F., Mishina V.D.
    Research of Industrial Enterprise Production Function
    101Glukhov S.V., Gonchar E.A.
    Cost-Based Industrial Enterprise Human Capital Management
    104Solovev D.B., Merkusheva A.E.
    Development of Industry in Far East of Russia Based on Use of Innovative Investment Attraction Practice
    107Byl E.A., Burenina I.V., Kotov D.V.
    The Cross-Industry Cluster Formation as a Reengineering Mechanism for the Production Relations of the Old-Industrial Regions
    108Salov A.G., Gavrilova A.A., Sagitova L.A.
    Comprehensive Approach to Industrial Enterprises Management Structure Optimization
    109Kharitonov M.А.
    Сonstruction and Analysis of the Production Function for Complex Structured Productions
    110Lysenko Y.V., Zelenskaya J.A.
    System Performance Indicators of Economic Security of the Region
    111Taipova E.H., Lysenko M.V.
    Features of Forecasting the Development of Regional Enterprise Structures in Conditions of Global Economic Change
    114Salov A.G., Gavrilova A.A., Chirkova J.V.
    Optimization of Power Plants Management Structure Based on Generalized Efficiency Criteria
    126Pogotovkina N.S., Ugay S.M., Demakhina E.S.
    Impact of Platon ETC System on Intercity Trucking Cost
    128Kamenik L.L.
    Resource Recycling as New Field for Innovative Technologies
    129Baev I.A., Soloveva I.A., Dzyuba A.P.
    Assessment and Analysis of Energy Infrostructural Potential of Russian Regions
    131Никоноров В.М.
    Оптимизация затрат на промышленном предприятии
    132Chernogorskiy S.A., Shvetsov K.V.
    Evaluation of Innovative Risks When Choosing the Innovative Strategy at the Enterprise
    133Mager V.E., Leonova T.I., Chernenkaya L.V.
    Probabilistic Pattern of Risks in Company’s Quality Management System
    134Radaev A.E., Leventsov V.A., Kobzev V.V.
    Procedure for Determining Transport and warehousing Systems Characteristics in Industrial Enterprises in Megapolis
    135Krasyuk I.A., Bakharev V.V., Medvedeva Y.Y.
    Sector Specific Features of Innovative Development in the Russian Economy
    137Pirogova O.E., Plotnikov V.A.
    The Impact of Company Capital Structure on the Estimation of its Value Growth
    138Didenko N.I., Skripnuk D.F., Mirolyubova O.V.
    Industry and Environment: Modeling the Global Production Impact on CO2
    139Krasyuk I.A., Kirillova T.V., Kozlova N.A.
    Network Technologies as Innovative Solution in Commodity Circulation
    140Tsvetkova N.A., Tukkel I.L.
    Specifics of Multi-Project Management: Interaction and Resources Constraints
    141Kalmykova S.V., Krasnoshchekov A.V., Gileva T.A.
    Assessing Impact of Changes in Human Resources Features on Enterprise Activities: Simulation Model
    142Geyda A.S., Lysenko I.V.
    Schemas for the Analytical Estimation of the Operational Properties of Agile Systems
    143Ivanov O., Silnov D.
    1C Software Vulnerabilities Description
    145Peskova D.R., Vasileva Yu.P.
    Commercial Secret as an Instrument of Company Competitive Strategy Effectiveness Increase
    146Ermishina A.V., Mienshenina E.A.
    Evaluation of Alternative Institutional Arrangements in Public Utilities
    147Kalmykova S.V., Krasnoshchekov A.V., Pustylnik P.N.
    Mathematical Modeling as a Basis for an Efficient Enterpreise Management
    148Babkin A.V., Vertakova Yu.V., Plotnikov V.A.
    Study and Assessment of Clusters’ Activity Effect on Regional Economy
    149Vertakova Yu.V., Miroshnikova Т., Zdolnikova S.
    Institute of Taxation and Its Contribution to Economic Structure Development (Russian Practice)
    150Zdolnikova S.V., Babkin A.V., Smolskaya N.B.
    Research and Evaluation of Innovative Integrated Industrial Structure Potential: Theoretical and Practical Aspects
    151Sidorova N.G., Repina I.B., Timchenko V.O.
    Priority Directions of Innovative Development of Russian Fuel and Energy Complex on Global Investment Market
    154Kuznetsova E.Y., Cherepanova E.V., Gamberg A.E.
    Organizational Infrastructure of Innovation Processes in Russian
    155Prilutskay M.A., Krilatkov P.P., Norkina O.S.
    Structural Capacity Assessment of Machine-Building Enterprises and Associations
    156Blinkov M.O., Blinkov O.G.
    Methods of Assessing Functioning of Organizational and Economic Mechanism during Innovation Process Implementation
    157Akulova A.A., Podolyak O.O., Mineeva T.A.
    "Green" Innovations in Transport Branch: Restrictions, Ways of Implementation
    158Kuznetsova E.Y., Akulova A.A., Zhuravskaja M.A.
    Structural Capacity Assessment of Machine-Building Enterprises and Associations
    160Kuznetsova E.Y., Ershov A.V.
    Restrictions of process machine retooling at machine-building enterprises
    161Ershova I.V., Kalinina N.E., Mezentev P.V.
    Mechanism of Interaction between Large Industrial Enterprises and Small Innovative Enterprises
    162Filatov F.Yu., Sokolovsky Yu.M.
    Model of Monopolistic Competition with Heterogeneous Labor
    163Keller A.V., Vinogradova T.A.
    Development of algorithm for Depreciation Costs Allocation in Dynamic Input-Output Industrial Enterprise Model
    164Filatov F.Yu., Makolskaya Ya.S.
    The Increasing Concentration at Industrial Markets: the Social Welfare Maximization and Possible Risks
    165Oleinik E.B.
    On Attracting Investment to Russian Economy
    166Shkarina Т. Yu., Chudnova O.A., Mokhova O.
    Comparative Study on Economic Security of Enterprises Depending on Implemented Business Activities Quantity
    167Tsygankova I.V., Ivanova N.G.
    Prospects of Using New Non-Standard Employment Forms at Russian Enterprises
    168Ivanova N.G., Lavrova Z.I.
    Quality Management Technology Impact on Small Enterprise Production Activities
    169Morgunov Yu.A., Saushkin B.P.
    Features of Additive Technologies Implementation in Aerospace Equipment Production
    2 Butrin A.G., Baev I.A.
    Modification of the Method of Construction of Value Chain Industrial Enterprises with Regard to Financial Involvement of Staff of Logistics
    4 Shindina T.A., Kotova L.B.
    The Prediction of the Economic Effect of the Energy-Saving System Implementation: Corporate and Regional Aspects
    5 Trifonova N.V., Shvetsova O.A. / Трифонова Н.В., Швецова О.А.
    Motivation of the Personnel of Hi-tech Productions
    Мотивация персонала высокотехнологичных производств
    7 Danilov A.N., Stolbov V.Yu.
    Synergetic Openness as a Social and Technical System Competitiveness Parameter
    8 Kossukhina M.A., Fomin V.I. / Косухина М.А., Фомин В.И.
    Innovation Project Value Assessment Methodology for High-tech Enterprises
    Методика оценки стоимости инновационных проектов для высокотехнологичных предприятий
    9 Kuchina E.V Baeva D.A.
    The Multipurpose Industrial Company’s Competitiveness Evaluation Method for Instable Environmental Conditions
    10 Myznikova T.N., Bunova E.V., Yaroslavova E.N.
    Modeling the Formation of an Industrial Enterprise Operating Income
    12 Suvorova L.A., Zaushitsyna L.L.
    The Formation of the Development Model of the Innovative Industrial Cluster and Methods for Evaluating its Economic Effectiveness
    13 Suvorova L.A., Baibakova T. V., Pestova I.V.
    The Process of Forming the Synergetic Effect in the Industrial Cluster and Its Economic Evaluation
    14 Buslaeva O.S., Bunova E.V., Malovechko C.N.
    Analysis of Investment Appeal of the Industrial Enterprise by Eigenstate Method
    15 Pytaleva O.A., Fridrikhson O.V., Dyorina N.V.
    Intermodal Supply Chains Methodology and Economic Efficiency Study of its Implementation (Using the Example of an Iron and Steel Company)
    16 Solovieva I.A., Dzyuba A.P.
    Model of Price-Dependent Management of an Industrial Enterprise Energy Consumption
    17 Mirolubova T.V., Voronchikhina E.N.
    The Problem of Reproduction of Basic Assets in Industry as the Barrier for Neoindustrial Transformation of Regional Economy
    19 Kuvshinov M.S., Komarova N.S.
    Improvement of Methods of Evaluation of Investment Projects in the Context of Import Substitution
    20 Mokhov V.G., Demyanenko T.S.
    Modeling Prices of Wholesale Market of Electric Energy and Power by the Example of the UPS of the Ural
    21 Mokhov V.G., Demyanenko T.S.
    Research of the Elasticity of Electric Energy Tariff Demand on Competitive Market of Unified Energy System of the Ural
    24 Nesterova L.G.
    Use of Statistical Indicators of Profit Accounting for Formation of a Product Portfolio
    25 Ivanov A.E., Vasilchenko А.А.
    Economic Efficiency Evaluation of Merges and Acquisitions in the Sector of Industry Based on Nonlinear Model of Synergistical Growth of an Industrial Corporation Value
    26 Kornilov S., Lukjanov V., Antonov A.
    Efficiency Increase of Complex Production and Transport Systems Management
    27 Raskatova M.I., Golovanov E.B.
    The Improvement in Management of Material and Production Reserves of the Enterprise in Conditions of Uncertainty using the Fuzzy Sets
    28 Puryaev A.
    Evaluating of Innovative Projects’ Effectiveness at Industrial Enterprises
    30 Zozulya D.M.
    Region Innovation and Investment Development: Conceptual Theoretical Approach and Business Solutions
    31 Astashova Y.V., Demchenko A.I.
    Development of a Complex System of the Enterprise’s Consumer and Partner Interaction
    32 Pluzhnikov V.G., Kukharenko S.I., Shikina S.A.
    Graphical-Analytic Model to Form Investment Policy of Industrial Enterprise
    33 Pluzhnikov V.G., Kukharenko S.I., Shikina S.A.
    Identification of Business Processes of the Enterprise by Intrinsic States Method
    37 Pollack G.A., Ufimtseva O.V. / Поллак Г.А., Уфимцева О.В.
    The Practical Implementation of Enterprise Balanced Scorecard Analysis System
    Практическая реализация системы анализа сбалансированных показателей предприятия
    39 Akhmetova I.G., Chichirova N.D.
    The Reliability and Efficiency of Power Companies
    40 Shishkina A.V.
    Accounting of Discounts, Acquired by an Enterprise when Purchasing Production Inventories
    41 Anna A. Ter-Grigor’yants, Kulagovskaya T.A.
    Methodical Assessment and Analysis Tools of National Industrial Complex Capacity in the Regional Aspect
    42 Ismagilova L., Klimova N., Sitnikova L.
    Management Instrumentarium of Innovation Development of Medium-Sized Industrial Enterprises
    44 Shevelev A.E., Sheveleva E.A., Bazhanova M.I.
    Cost Management at the Tube-Rolling Enterprises
    46 Akhtyamov M.K., Gonchar E.A.
    Innovation Capital in The Appraisal System of Intrinsic Industrial Enterprise Value
    47 Akhtyamov M.K., Gonchar E.A.
    Financial Capital Appraisal in the System of Industrial Enterprise Development Management
    49 Shevelev A.E., Sheveleva E.V., Gvozdev M.Yu.
    Methods of Internal Control in Integrated Management Accounting System of the Enterprise
    52 Kolbachev E.B.
    Methodology of the Evolutionary Economics in Application to the Engineering Problems
    54 Brusakova I., Zvontsov A., Shvetsova O. / Брусакова И.А., Звонцов А.В., Швецова О.А.
    Training of Innovative Engineers for Problems of Modernization of a Domestic Production
    Подготовка инновационных инженеров для задач модернизации отечественного производства
    55 Antonenko E., Baev I.
    Transaction Costs of Innovative Enterprise
    56 Gerashchenkova T.
    Approaches to the Evaluation of the Effectiveness of Innovative Development of the Machine-Building Enterprise Strategy
    57 Fomina I., Dreshchinsky V. / Швецова О.А., Фомина И.Г.
    Calculation of Efficiency of the Project of Modernization Machining Shop of the Instrument-Making Enterprise
    Расчет эффективности проекта технического перевооружения механообрабатывающего цеха приборостроительного предприятия
    58 Mikhailov I. / Михайлов И.Н.
    Applied Economic Model Development Algorithm for Electronics Company
    Алгоритм разработки прикладной экономической модели для предприятия микроэлектронной промышленности
    60 Vaisman E.D., Podshivalova M.V.
    Small Industrial Enterprises in Russia: Survival in Conditions of Hypercompetition
    61 Simonyan T.V., Ovanesyan N.M., Midler E.A.
    Communication Support in Manufacturing Enterprise: Coordination Mechanism and Management Particularities
    64 Zvonareva Yu.N., Vankov Yu.V., Shlychkov V.V.
    Commercial Effectiveness Assessment of Implementation the Energy Efficiency Raising of the Building Project due to Introduction of Automatic Heat Consumption Control
    68 Timofeev R.A., Shlychkov V.V., Nestulaeva D.R.
    Methods of Economic Reliability Assessment for Industrial Enterprise in the Market Economy Conditions
    78 Babanova Yu.V., Gorshenin V.P., Dolinskaia A.Yu.
    Management Features of the Innovative Development of the Enterprise Taking into account Cost-Effective Use of Resources
    80 Parshina V.S., Maruschak T.B., Gusev A.A.
    Industrial Traumatism Management Oriented to Result
    82 Zambrzhitskaia E.S., Neshporenko D.G., Dolgopolov O.V.
    Production Capacity of Metallurgical Enterprises in Modular Structure of Management Accounting
    83 Lyaskovskaya E.A., Kurbangaliev M.R.
    Energy Management оf Industrial Enterprise
    87 Minkin M.S., Izotov M.A., Ananova O.G.
    Engineering Center as a Tool for HEI’s Scientific and Innovation Potential Integration in the Real Economy
    89 Greyz G.M.
    Implementation of Information and Analysis Support of the Industrial Enterprise’s Logistical Management based on the Tools of the Fuzzy Set Theory
    91 Myznikova T.N., Zhdanova N.V.
    Cash Flow Optimization in Industrial Enterprise
    95 Evdokimov S.I., Galachieva S.V., Tebloeva D.V.
    The Economic Efficiency of Investment in the Development of Reserves of Small Groups of Geographically Contiguous Gold Deposits
    96 Sidornya A.
    Accounting Engineering for Sustainable Development
    99 Karelina M.
    The Development of the Methodical Approach to Value Business Appraisal within the Integration Policy for Industrial Enterprises
    100 Karelina M., Mkhitarian V.
    A Statistical Approach to the Analysis of Merger and Acquisition Efficiency in the Russian Industry
    101 Bakhracheva Yu.S., Kayl Ya.Ya.
    Lean Production: Experience among Russian Organizations
    102 Бром А.Е., Хомбак А.А.
    Ключевые основы реализации инжиниринговых проектов
    103 Taipovа E.H., Lysenko Y.V., Myznikova T.N.
    Improved Methods of Complex Estimation of Efficiency of Activity of Industrial Organizations
    104 Lysenko Y.V., Lysenko M.V., Zelenskaya G.A.
    Effect of High-Quality Technical Capacity Characteristics to the Impact of Industrial Production
    105 Penkova I., Bodnar A., Rebezov M.
    Enterprises’ Communication System Diagnostics
    106 Efimova M.G.
    Increasing Economic Stability of the Industrial Enterprise as a Result of its Market Value Modeling
    108 Butrina Y.V., Tishina V.N., Tishin P.Y.
    The Management Level of Logistics Customer Service Industrial Enterprise
    109 Aikhel K.V.
    Risk Management as a Modern Sustainable Development of the Enterprise Management Tool
    110 Antonyuk V.S., Danilova I.V., Erlikh G.V.
    Risks of a Town-Forming Enterprise in the Risk System of a Company Town
    111 Baev L.A., Egorova O.V.
    Performance Management of Investment Projects based on Real Option Theory and Method of Analysis of Hierarchies
    112 Varkova N.Yu.
    Modernisation of Production as a Factor of Influence on Economic Stability of the Industrial Enterprise
    113 Gusev E.
    Construction and Assembly Works Planning: Optimization or Search for Solutions
    114 Dzenzelyuk N.
    Adaptive Inventory Management System of an Industrial Enterprise in the Unsteady Market Environment
    115 Ershova I.V., Podolyak O.O., Prilutskaya M.A.
    Trends in the Structures Development of the Regional Machine-Building Complex
    116 Zhuravlyov V.V.
    Formation of the Sustainable Development Mechanism at Enterprises of Mining Industry as a Condition of Overcoming Crisis
    117 Krivorotov V.V., Kalina A.V., Tretyakov V.D.
    Research and Assessment of Competitiveness of Large Engineering Complexes
    119 Pishchulina E.S.
    Modelling Management Process of Key Drivers for Economic Sustainability in the Modern Conditions of Economic Development
    120 Romanova O.A.
    Hi-Tech Sector's Forming and Development under the Conditions of New Industrialisation
    122 Khudyakova T.A., Shmidt A.V.
    Developing Integrated Performance Assessment and Forecasting the Level of Financial and Economic Enterprise Stability
    123 Khudyakova T.A., Shmidt A.V.
    Risk Reduction based on Controlling Technologies on Industrial Enterprises
    Part 5. Industrial and civil construction
    45V.A. Abyzov
    Refractory Cellular Concrete Based on Phosphate Binder from Waste of Production and Recycling of Aluminum
    46G.F. Averina, T.N. Chernykh, K.V. Shuldyakov
    Hardening Stowing Mixture Based on Technological Dolomite
    47E.Yu.Anisimova
    Building Thermal Regime Modeling
    48A.Kh.Baiburin
    Civil Engineering Quality Assessment in Terms of Construction Safety Index
    49A.Kh.Baiburin
    Errors, Defects and Safety Control at Construction Stage
    50M. Butakova, S. Gorbunov
    Improving Performance Characteristics of Construction Materials Manufactured by Pressing Technology
    51S.B. Koval, M.N. Kagan
    Analysis of Various Media Concrete Penetrating Ability Depending on Different Factors Affecting Water Absorption
    52A.V. Kiyanets
    Technological Parameters of Magnesia Mortars
    53A.A. Melnik
    Calculation of Concrete Strength in Winter Conditions Based on Heat Exchange Processes Modeling
    54G.A. Pikus, I.V. Manzhosov
    Pressure of Fiber Reinforced Concrete Mixtures on Vertical Formwork Panels
    56E. Ufimtcev
    Dynamic Calculation of Nonlinear Oscillations of Flat Trusses. Part 1: Mathematical Model of Nonlinear Structural Oscillations
    57E. Ufimtcev
    Dynamic Calculation of Nonlinear Oscillations of Flat Trusses. Part 2: Examples of Calculations
    58T.N. Chernykh, A.A. Orlov, L.Ya. Kramar
    Characteristic Features of Magnesia Binding Powder Production from Satka deposit Carbonate Rocks
    59K.V.Schuldyakov, L.Ya.Kramar, B.Ya.Trofimov
    Interconnection between Concrete Structure and Properties and Various Modifications
    60R.A. Yanturina, B.Ya. Trofimov, R.M. Ahmedjanov
    The Influence of Graphite-Containing Nano-Additives on Thermo-Frost Resistance of Concrete
    61N.V. Degtyareva
    Review of Experimental Studies of Cold-Formed Steel Channels with Slotted Webs under Bending
    62S.Е. Denisov, М.V. Denisova
    Analysis of Hydropower Potential and the Prospects of Developing Hydropower Engineering in South Ural of the Russian Federation
    65V.D. Olenkov
    Experimental Research on How Technogenic Relief Affects Aeration Mode of Disturbed Areas
    66V.D. Olenkov
    Modeling of Wind Regime in Disturbed Areas Restorable for Urban Development
    67R.G. Gubaidulin
    Causes of Fracture of Elevating-And-Traversing Stand of Continuous-Casting Machine
    68S.S. Timofeeva, D.V. Ulrikh, N.V. Tsvetkun
    Professional Risks in Construction Industry