industrial engineering
e-mail icie.rus@gmail.com

ICIE-2016 PROGRAMM

    Authors Name/s, papers Title
    Part 1. Research and development of machines and mechanisms
    Section 1.1. Dynamics of machines and working processes
    1D.I. Shishlyannikov, M.A. Vasilyeva
    Research of the Mine Shuttle Car Drive Mode at Potash mines
    2N. Marina, E. Ovchinnikova
    Analysis of Performance Criteria of Boosted Diesel Engine Slide Bearings
    3V. Lazarev, G. Lomakin, E. Lazarev
    Modeling of Injection Parameters for Diesel Engine Injector Nozzles with the Additional Precision Guiding Interface
    4A.B. Moskalenko, A.I. Kozhevnikov
    Estimation of gas turbine blades cooling efficiency
    5D.A. Shlyakhin
    Refined solution for dynamic axisymmetric electroelasticity problem for rigid bi-morph plate
    6I.A. Krivosheev, D.G. Kozhinov, K.E. Rozhkov
    Changes in the engineering products performance during operation
    7T.A. Baltayev , A.V. Korolev, T.M. Mannapova
    Mathematical modeling of elastic hysteresis phenomenon in round plates in presence of residual tension
    8A.B. Dar’enkov, A.S. Plekhov, V.I. Erofeev
    Effect of material damage on parameters of a torsional wave propagated in a deformed rotor
    9A.S. Plekhov, V.V. Kazhayev, V.I. Erofeev
    Frictional Self-Oscillation of a Deformable Washer Interacting with a Rigid Rod that Rotates at a Constant Angular Velocity
    10A.M. Ulanov, S.A. Bezborodov
    Calculation Method of Pipeline Vibration with Damping Supports Made of the MR Material
    11V.E. Saitov, R.F. Kurbanov, A.N. Suvorov
    Assessing the Adequacy of Mathematical Models of Light Impurity Fractionation in Sedimentary Chambers of Grain Cleaning Machines
    12L.V. Plotnikov , B.P. Zhilkin, Yu.M. Brodov / Плотников Л.В., Жилкин Б.П., Бродов Ю.М.
    The Influence of Cross-profiling of Inlet and Exhaust Pipes on the Gas Exchange Processes in Piston Engines
    Влияние поперечного профилирования впускных и выпускных трубопроводов на процессы газообмена в поршневых двигателях
    13O.F. Cherniavsky
    Stability of the Low-Cycle Deformation of Structures
    14A.O. Cherniavsky , K.V. Gorbunov
    An approach to numerical modeling of selective laser melting
    15I.A. Krivosheev, D.G. Kozhinov, A.E. Kishalov
    The thermo-gas-dynamic modeling of afterburning turbofan engine for high maneuverable aircraft combined with its automatics
    16E.A. Lazarev , M.A. Matculevich, V.E. Lazarev
    Peculiarities of Gas Pressure Development Depending on the Intensity of a Burning Fuel in the Diesel Engine Cylinder
    17V.G. Podoynikov , E.E. Rikhter, G.G. Protsenko
    Research and Design of Construction of a Bearing Plate of a Counter Rail Attachment Fitting
    18A.V.Erpalov, L.A.Shefer
    Fatigue-based classification of loading processes
    20D.Ya. Antipin , D.Yu Racin, S.G. Shorokhov
    Justification of a Rational Design of the Pivot Center of the Open-Top Wagon Frame by means of Computer Simulation
    21A.E. Mikhailov, A.B. Mikhailova, D.A. Akhmedzyanov
    New 1-D Method for the Prediction of Axial-Flow Compressors Off-Design Performance
    22A.L. Kartashev, M.A. Kartasheva
    Designing of Optimal Annular Nozzles with Multiphase Flows
    23A.V. Mesropyan, R.R. Sharipov / Месропян А.В., Шарипов Р.Р.
    Mathematical Modeling of Transient Processes in the Jet Pipe Servoactuator with a Dual-Mode Controller
    Моделирование переходных процессов двухрежимной струйной гидравлической рулевой машины
    24A.V. Otrokov, G.S. Khazanovich, V.G. Khazanovich
    Analysis of Kinetic Characteristics of Continuous Action Loading Organs Mechanisms
    26E.I. Shchurova
    Modeling of the Ceramics Structure for the Finite Element Analysis
    27T.S. Ataev, V.I. Denisenko / Атаев Т.С., Денисенко В.И.
    Small Enclosed Diesel Generator with a Multifunctional Brushless Exciter and Nanostructured Insulating Materials Used
    Дизельный генератор закрытого исполнения с совмещенным многофункциональным бесщеточным возбудителем с применением наноструктурированных изоляционных материалов
    28A.P. Senachin, A.A. Korzhavin, P.K. Senachin
    Simulation of Fuel Ignition Delay in Diesel Engines with Various Fuel Feeding Systems
    29E.K. Spiridonov, D.F. Khabarova / Спиридонов Е.К., Хабарова Д.Ф.
    Foam Fixer Hydrodynamics and Design Calculation
    Гидродинамика и расчет пеносмесителя
    30E.K. Spiridonov, S.Y. Bityutskikh / Спиридонов Е.К., Битюцких С.Ю.
    Simulation Model and Characteristics of the Cavitation Mixer with Hydrodynamic Grid
    Расчетная модель и характеристики кавитационного смесителя с гидродинамической решеткой
    31F. S. Sabirov, N. A. Kochinev, S. S. Shemyakin
    Operational Assessment of Machine Tool Vibration Resistance
    32I.R.Chinyaev, A.V.Fominykh, E.A.Ilinykh
    The Valve is a Shutoff for the Passive Protection Systems of Pipelines
    33V.A. Markov, V.G. Kamaltdinov, S.S. Loboda
    Optimization of Diesel Fuel and Corn Oil Mixtures Composition
    34E.A. Lazarev, A.N. Pomaz, A.Y. Salov
    System of Ejection Cooling of the Charged Air and Evaluation of its Effectiveness in the Engine
    35B.M. Brzhozovsky, I.N. Yankin, M.B. Brovkova
    Controlling the Oscillatory Process Composition in Machining by Correcting the Exciting Force Structure in the Cutting Zone
    36A.R. Ismagilov, E.K. Spiridonov
    Operational Process and Characteristics of Liquid-Gas Jet Pumps with the Ejected Vapor-Gas Medium
    37A.A. Abyzov, O.S. Sadakov
    Model of Accumulation of a Cycle Fatigue Damage in the Multi-Parametric Random Loading
    38I.R. Chinyaev, A.V. Fominykh, E.A. Pochivalov
    Method for Determining of the Valve Cavitation Characteristics
    39B.T. Budai
    Defining of the Power of a Control Loop Actuator
    40A. Sytin, V. Tyurin , S. Antonov
    Stability Enhancement of High-Speed Rotors on Foil Bearings with the Automatic Mode Switch
    41I.R. Chinyaev, A.V. Fominykh, S.A. Sukhov
    Energy-Saving Shut-Off and Regulating Device
    42D.S. Korobkov , O.V. Ufimtseva
    Choice of the Traction Motor for the Electric Racing Car “Formula Student”
    43O.V. Zalogin, A.S. Noskov
    On the Study of Setting Dynamics of Axial Piston Pumps with Electro Hydraulic Proportional Control
    44А.В. Кистойчев, Н.В. Машечкин, Е.Ф. Ковальчук
    Диагностика и устранение низкочастотной вибрации на агрегатах с магнитным подвесом роторов
    45А.В. Кистойчев, Е.Ю. Дегтярева, А.В. Балеевских
    Некоторые практические аспекты целесообразности внедрения новых подходов к нормированию качества балансировки роторов
    46N.N. Efimov, V.V. Papin, R.V. Bezuglov
    Determination of Rotor Surfacing Time for the Vertical Microturbine with Axial Gas-Dynamic Bearings
    47A.M. Zakhezin, Y.G. Pryadko
    Vibration Diagnostics of Gas Pipelines Technological Equipment Using Wavelet Analysis
    49В.Б.Порошин, П.С. Дружинин, С.А. Шахова
    Методика оценки долговечности лопатки газовой турбины в условиях неупругого деформирования при двухчастотном нагружении
    50A.L. Kartashev, M.A. Kartasheva, E.V. Safonov
    Application of the Ranque-Hilsh Vortex Effect for Creation of the Evaporation Plant for Water Demineralization
    51A.V. Vasilyev, Y.S. Bakhracheva, S.Y. Storojakov
    Dynamics Simulation Model for the Internal Combustion Engine Valve Gear
    52A.N. Savkin, A.S. Gorobtsov, K.A. Badikov
    Estimation of Truck Frame Fatigue Lifeunder Service Loading
    53N.N. Efimov, V.V. Papin , R.V. Bezuglov
    Micro Energy Complex Based on Wet-SteamTurbine
    56A.V. Ignatova, S.B. Sapozhnikov, P.A. Taranenko
    Dynamic Verification of a Grid Structure Numerical Model Consisting of Different Stiffness Parts
    57A.A. Yaushev, P.A. Taranenko, V.A. Loginovskiy
    Study of the Oscillation Modes of a Coriolis Flowmeter Using a Parametric Finite Element Model, Verified by the Results of Modal Testing
    58М.Э. Бондаренко
    Экспериментальные исследования динамических характеристик ротора в активных комбинированных опорах
    59A.A. Prikhodko, A.V. Nesterov, S.V. Nesterov
    Analysis of Mathieu Equation Stable Solutions in the First Zone of Stability
    60R.I. Leukhin, D.V. Shaykhutdinov, V.I. Leukhin
    Development Systems and Methods for Adaptive Control of Electromagnetic Actuators Based on Sensorless Control Weber-Current Characteristics
    62I.V. Ryabov, V.V. Novikov, A.V. Pozdeev / Рябов И.М., Новиков В.В., Поздеев А.В.
    Efficiency of Shock Absorber in Vehicle Suspension
    Эффективность работы амортизатора в подвеске транспортного средства
    63A.V. Kochergin, N.V. Pavlova, K.A. Valeeva
    Vibroacoustic Control of Technical Conditions of GTE
    64V.L. Zacovorotny, A.D. Lukyanov
    System Synthesis of Machine Tool Manufacturing Process Control Based on Synergetic Conception
    65M. Vartanov, N. Martynovic / Вартанов М.В., Мартынович Н.А.
    Reliability for the Robotic Assembly of Cylindrical Parts
    Обеспечение надежности роботизированной сборки цилиндрических соединений
    66I.M. Ryabov, K.V. Chernyshov, A.V. Pozdeev / Рябов И.М., Чернышов К.В., Поздеев А.В.
    Energy Analysis of Vehicle Suspension Oscillation Cycle
    Энергетический анализ цикла колебаний подвески транспортного средства
    69S.S. Makarov, V.B. Dement’yev, E.V. Makarova
    Mathematical Modeling of Cooling High-Temperature Cylindrical Workpieces
    70D. Sidorov , S. Sazonov, D. Revenko
    Building a Dynamic Model of the Internal Cylindrical Grinding Process
    Section 1.2. Friction, wear and lubrication in machines
    2A. Keropyan, S. Gorbatyuk
    Impact of Roughness of Interacting Surfaces of the Wheel-Rail Pair on the Coefficient Of Friction in Their Contact Area
    3A.V. Antsupov , V.P. Antsupov, M.G. Slobodianskii
    Analytical model for the wide-strip rolling mills working rolls wear-out failures
    4A.V. Antsupov , V.A. Rusanov, I.A. Antsupova
    Modeling of Wear-Out Failures and Service Life Improvement of Sealing Units
    5K.N. Voinov
    Dynamics of Adhesion Control for Different Lubricants
    6V.S. Korotkov. , Lao Guanqing, D.V. Shepetovsky
    Equations of Rounded-Edge Profile for a Ring Gear in a Wave Reducer with Intermediate Rolling Elements
    7P.I. Malenko , K.J. Relmasira, A.Yu. Leonov
    Studying the Resonance Processes in the Surface Layers of Friction Pairs with Lubrication by Means of Molecular Dynamics
    8O.V. Burlachenko, D.P. Klochkov
    Increase of the Wear Resistance of Metal Details on the Basis of a Simultaneous Application of the High-Test Cover and Ultrasonic Vibrations
    9K.N. Voinov, A.Yu. Grigor’ev, K.A. Grigor’ev
    Compressor Reliability Improvement
    10D.M. Yakovleva, G.F. Mukhametzyanova, L.R. Kharisov
    The research of stresses in the molds of injection molding machines
    11V.G. Shram , A.V. Lysyannikov M.A. Kovaleva
    The Mechanism of Lubricants Protective Layers Formation in Friction Sliding
    14O.V. Burlachenko, M.V. Ivanov
    Increase of Durability Transmission Mechanism Based on the Laser Processing Improvement
    15A.N. Bolotov, V.V. Novikov, O.O. Novikova
    Service Life of Magnetic Liquid Vacuum Tribounits
    16A.V. Korolev, O.U. Davidenko, S.A. Savran
    The Assurance Factor Definition of Metal Ware for the Technological and Engineering Objectives Control
    17B.I. Kowalski, D.D. Abasin, O.N. Petrov
    Method of control the effect of temperature for the oxidation process of partially synthetic motor oils
    18A.N. Sokolnikov, Yu.N. Bezborodov, V.G. Shram
    Apparatus for Determining of the Pour Point of Crude Oil and Petroleum Products
    20V.A. Romanov , N.A. Khozeniuk
    Experience of the Diesel Engine Cooling System Simulation
    21А.Ю. Корнеев, Л.А. Савин
    Траектории движения ротора в конических подшипниках жидкостного трения
    22A.V. Korolev , A.A. Korolev
    Microscip Mechanism in Raceways and Rolling Elements of Roller Bearings
    23B.M. Iznairov, A.V. Korolev, A.A. Korolev
    Improving the Assembly of Ballscrews Using Analysis of Interactions between the Working Parts
    25S.G. Nekrasov
    To the Projection of a Peristaltic Slit Pump
    26S.G. Nekrasov
    Hydrodynamic Seal on the Basis of a Cylindrical Layer of the Compressible Fluid with a Running Wave
    27P.G. Ivanochkin, S.A. Danilchenko, Е.S. Novikov
    Antifriction Composites Based on Phenylone C2 for Work under Conditions of Dry Friction
    28I.V. Dobrov
    On the Friction Theory of Solids with Flat Contact Surface
    29A.A. Asaulyak, Y.V. Rozhdestvenskii, K.V. Gavrilov
    Elastohydrodynamic Lubrication (EHL) of Piston Rings in the Internal Combustion Engine
    30Y. Rozhdestvensky, E. Lazarev, A. Doikin
    Effect of the Heat Insulating Coating of the Piston Crown on Characteristics of the "Piston-Cylinder Liner" Pair
    31A.M. Mukutadze
    Coefficient of a Rolling Motion Bearing Drive
    32M.A. Mukutadze
    Radial Bearings with Porous Elements
    33N.D. Polyakhov, A.D. Stotckaia , T.O. Kuzmina / Поляхов Н.Д., Стоцкая А.Д., Кузьмина Т.О.
    Mathematical Model of Complete Electromagnetic Rotor Suspension
    Математическая модель полного электромагнитного подвеса ротора
    34E.V. Berezina, V.A. Godlevskiy, N.V.
    Usol’tseva Investigation of Cholesteric Liquid Crystals and Carbon Nanotubes Additives on Mineral Oil Antifrictional and Rheological Characteristics
    35V.A. Godlevskiy, O.V. Blinov
    Computing of the Molecular Orientation State of the Lubrication Layer
    36I.V. Myakutina
    Enhancement of Efficiency of Electro-Optical Systems by Means of Optimization of Spring-Loading of EOS Actuators
    37I.V. Myakutina
    Analysis of the Efficiency of the Multipair Toothing Application in Reduction Gearboxes of EOS Actuators
    38E. Zadorozhnaya, I. Levanov, O. Oskina
    Study of HTHS Viscosity of Modern Motor Oils
    39I.V. Mukchortov, K.A. Pochkaylo, E.A. Zadorozhnaya
    The Influence of Anti-Wear Additives on the Bearings Hydro-Mechanical Characteristics
    40M.A. Skotnikova, N.A. Krylov, V.V. Medvedeva
    Influence of the Magnetic Component of Geomaterials on Properties of Friction Pairs
    41I.E. Zvonarev, S.L. Ivanov, D.I. Shishlyannikov
    Estimation of the Residual Operation Life Period of Mechanical Transmissions of Mining Machines by Means of Superficial Metal Hardness Measurement in Increased Wear Areas of Their Parts
    42E. Kornaeva, A. Kornaev , L. Savin
    Inertial Method of Viscosity Measurement of the Complex Rheology Medium
    43A. Fischer, A. Doikin , A. Rulevskiy
    Research of Dynamics of the Rotor with Three-film bearings
    44A. Valeev , S. Kharisov
    Application of Vibration Isolators with a Low Stiffness for the Strongly Vibrating Equipment
    45Yu.V.Rozhdestvensky, N.A. Khozeniuk, A.A. Mylnikov
    The Technique of an Interconnection Problem of the Hydrodynamic Lubrication Theory and the Nonlinear Dynamics for Mechanical Systems "An Elastic Crankshaft on Journal Bearings"
    46Yu.N. Bezborodov, N.N. Lysyannikova, E.G. Kravcova
    Results of the Study of Anti-Wear Properties of the Exhaust Motor Oil
    47B.I.Kowalski, E.G. Kravcova, N.N. Lysyannikova
    Results of the Experimental Evaluation of the Effect of Surface Roughness and the Load on the Mechano-Chemical Processes at the Boundary Sliding Friction
    48N.Sh. Tyuteryakov , R.R. Dema, S.P. Nefed'ev
    Simulation and Calculation of Temperature Distribution in Roll Fittings’ Guides in Contact with the Rolled Strip
    50A.V. Egorov, K.E. Kozlov , V.N. Belogusev
    Experimental Identification of Bearing Mechanical Losses with the Use of Additional Inertia
    51S.A. Renev, V.S. Prokopov
    Development of Mathematical Model for Detection of Conditional Sizes Primordial Cracks in LEFM and Its Implementation in Russian Cax System
    52Шелофаст В.В., Шанин Д.В., Прокопов В.С.
    Автоматизированное определение теоретического коэффициента концентрации местных напряжений при решении задач статической и усталостной прочности
    Section 1.3. Design and manufacturing engineering of industrial facilities
    1T. Alquraan, Yu. Kuznetsov, T. Tsvyd
    High-speed Сlamping Mechanism of the CNC lathe with Compensation of Centrifugal Forces
    2V.V. Kuts, Yu. A. Malneva, V.M. Skantsev
    Development and Testing of Profile Shafts Processing Method with Constructive Feed Cutters
    3D.V. Ardashev
    Photometric Analysis of Chips after Grinding Different Steel
    4D.V. Ardashev
    Impact of Grinding Steel Chemical Composition on Chips Grain-size Composition
    5O. Anikeeva , A. Ivakhnenko, A. Zhirkov
    Parametric reliability assurance for machine-tools
    6Yu.S. Stepanov, G.V. Barsukov, S.G. Bishutin
    Technological Fundamentals for Efficiency Control of Hydroabrasive Cutting
    7A.V.Antsupov , A.V.Antsupov, V.P.Antsupov
    Estimation and Assurance of Machine Component Design Lifetime
    8A.N. Loginovsky, L.I. Khmarova
    3D Model of Geometrically Accurate Helical-Gear Set
    9A.A. Ivakhnenko, M.L. Storublev , A.G. Ivakhnenko
    Tolerance Synthesis When in Operation of Process Equipment for Electroplated Coating Application
    10P. V. Shalamov , I. A. Kulygina, E. N. Yaroslavova
    ANSYS Software-Based Study of Thermal Drilling Process
    11O.S. Dmitrieva, A.V. Dmitriev , L.V. Kruglov
    Calculation of the Average Velocity of the Liquid in the Stream-Film Contact Devices
    13A.V. Vyboishchik
    Modelling Topology of Freeform Surfaces with Ball-end Milling
    14K. Syzrantseva,V. Syzrantsev
    Load on Multipair Contact Zones of Operating Parts of Screw Pumps and Motors: a Computer Analysis
    15V.A. Lebedev, A.V. Kirichek, V.D. Sokolov
    Energy State of a Plastically Deformed Surface Layer
    16T.N. Ivanova
    Design and Technology Support of the Grinding Process for Heavily-Machined Steel Sheets
    17А.А.Yamaltdinov, A.Yu.Ryabchikov
    Strength and Rigidity Calculation Technique for Exhaust Hoods of Steam Turbines Manufactured by “UTZ” Joint Stock Company
    19V.P. Smolentsev, S.V. Safonov, V.V. Zolotarev
    Improving the Flow Ducts of Heat Engine Sprayers
    20S. Bratan , P. Novikov, S. Roshchupkin
    Application of Combined Taps for Increasing the Shaping Accuracy of the Internal Threads in Aluminium Alloys
    21Yu. Novoselov, S. Bratan , V. Bogutsky
    Analysis of Relation between Grinding Wheel Wear and Abrasive Grains Wear
    22V.I. Guzeev, A.K. Nurkenov
    Researching the CNC-Machine Stiffness Impact on the Grinding Cycle Design
    23P. Norchenko, D. Kraynev, I. Kozachuknenko / Норченко П.А., Крайнев Д.В., Козачухненко И.Н.
    The Problem of Forecasting the Facial Layer Quality While Cutting Steel with Advance Plastic Deformation
    Проблема прогнозирования качества поверхностного слоя при резании сталей с опережающим пластическим деформированием
    24G.S. Morokina
    The Radiation Control with the Different Energy Resources in the Engineering Industry
    25A.V. Kapitanov
    Special Characteristics of the Multi-product Manufacturing
    27E.I. Yatsun, M.S. Razumov, A.N. Grechukhin
    Special Features of Antivibration Mountings, Steel Structures, and Equipment Production
    28M. Razumov, A. Grechukhin, A. Pykhtin
    Determination of Shape Errors during Polygonal Turning of Polyhedrons with an Odd Number of Faces
    29L.A. Ismagilova, N.A. Suhova
    Control of Manufacturing Aircraft Gas-Turbine Engines Labor Intensity at the Early Stages of Design
    30М.А. Прусаков
    Глубокая вытяжка тонкостенной полусферы
    31A.V. Shchurova
    Modeling of the Turbine Rotor Journal Restoration on Horizontal Balancing Machines
    32I.A. Shchurov, A.V. Nikonov, I.S. Boldyrev
    SPH- Simulation of the Fiber-Reinforced Composite Workpiece Cutting for the Surface Quality Improvement
    33I.S. Boldyrev, I.A. Shchurov, A.V. Nikonov
    Numerical Simulation of the Aluminum 6061-T6 Cutting and the Effect of the Constitutive Material Model and Failure Criteria on Cutting Forces’ Prediction
    34A. Fomin , M. Paramonov
    Synthesis of the Four-Bar Double-Constraint Mechanisms by the Application of the Grubler’s Method
    35V.G. Shalamov , V.I. Guzeev, S.D. Smetanin
    Shaping of Cell Chips at Rotary Milling
    36L. Dvornikov, A. Fomin
    Development of Basic Conditions for Division of Mechanisms into Subfamilies
    37B.A. Lopatin, S.V. Plotnikova
    Finishing of the Helical-Bevel Gear Teeth Flanks
    38A.A. Obozov , G.S. Mihalchenko, D.I. Subbotenko
    Definition of Fuel Ignition Delay Based on Running Process Diesel Engine Mathematics Modeling Method
    39V.P. Fyodorov, V.I. Averchenkov, M.N. Nagorkin
    Controlling the Parameters of the Component Quality Using Program Means While Performing Mechanical Machining
    40A.S. Apachanov, A.V. Rud, K.Y. Belousov
    Modeling of the Motion Clay Mass in the Screw Channel of the Screw Press
    41A.V. Slavin, S.A. Kryukov
    Phenomenological Model of the Mixing Process of Components of a Moldable Mixture for Manufacturing of Abrasive Tools
    42V.M. Shumyacher, A.V. Slavin, S.A. Kryukov
    The Influence of Ceramic Binder Grinding Wheel Structural and Mechanical Characteristics on its Durability
    44V.M. Shumyacher, A.V. Slavin, B.M. Brzhozowski
    On the Mechanism of Interaction of Abrasive Tools аnd a Workpiece at Grinding
    45S.L. Serzhan
    Determining the Rational Immersion Depth of a Mining Complex Capsule for Underwater Mining of Ferromanganese Nodules
    46S.V. Nescoromniy , E.L. Strizhakov, D.V. Rogozin
    Research and Development of Tubular Products Magnetic Pulse Welding–Forming Technology for Space Engineering
    47L.V. Shipulin , A.A. D'yakonov
    Imitation Model of Forecasting Surface Relief when Forming it During Cylindrical Grinding
    48A.S. Yanyushkin, D.A. Rychkov, D.V. Lobanov
    Rationalization of Polymer Composite Materials Processing by Improving Production Efficiency
    50V.E. Inozemtsev
    Surface Relief Shaping by Combined Machining of Aluminum Alloys
    51M.Yu. Kulikov, V.E. Inozemtsev, A.A. Bocharov
    Complex Quality Assurance Methods for Surface Machining
    52A.V. Muholzoev, V.B. Masyagin
    Probabilistic Calculation of Tolerances of the Dimension Chain Based on the Floyd-Warshall Algorithm
    53O.V. Zakharov , I.N. Bobrovskij, A.V. Kochetkov
    Analysis of Methods for Estimation of Machine Workpiece Roundness
    54A. Pratap, K. Patra, A.A. Dyakonov
    Manufacturing Miniature Products by Micro-grinding: a Review
    55A.S. Vasiliev
    Controlled Forming of Machine Components Operating Characteristics
    56I.V. Shmidt, A.A. Dyakonov
    Numerical Solution of the Thermophysical Task of Grinding of the Laminated System Consisting of Polymer-Composite Materials
    57A.I. Kondakov
    Productivity as Measure of Multiproduct Metal Processing Production Efficiency
    58A.V. Zhdanov, V.V. Morozov
    Theoretical Study of the Load Distribution on the Threads for Roller Screw Mechanisms of a Friction Type
    59A.N. Unyanin, A.Sh. Khusainov
    Study of Forces during Ultrasonic Vibration Assisted Grinding
    61A.N. Vorozhishchev, R.R Dema, T.V Kazakova / Ворожищев А.Н., Дема Р.Р., Казакова Т.В.
    Modeling of a Thermal Massive Body Depending on the Cooling Liquid Volume, as Exemplified by Rolls for a Hot-Rolling Mill
    Моделирование теплового состояния массивного тела в зависимости от объема поступающего охладителя, на примере прокатных валков стана горячей прокатки
    62N. Pokintelitsa, E. Levchenko
    Projecting Parameters of a Microprofile for a Surface Obtained as a Result of the Thermofrictional Treatment
    63A.M. Lankin, M.V. Lankin, O.A. Naugolnov
    Approximation of Family Basic Magnetization Curves of the Magnetic Electrical Devices for the Solution of Inverse Problems of the Diagnostics
    64N.I. Gorbatenko, A.M. Lankin, M.V. Lankin
    Application of the Principal Component Analysis for Control of Electrical Products
    67V.T. Dubrovin, V.Ju. Chebakova ,V.S. Zheltukhin
    Radio-Frequency Discharge at Low Pressure: a Non-Local Problem Statement Approach
    68K.I. Kostromitin
    Technological Aspects of the Retroreflective Sheeting Production
    70I.B. Badriev, M.V. Makarov, V.N. Paimushin
    Numerical Investigation of Physically Nonlinear Problem of Sandwich Plate Bending
    71I.B. Badriev, M.V. Makarov, V.N. Paimushin
    Mathematical Simulation of Nonlinear Problem of Three-Point Composite Sample Bending Test
    72A.N. Anikeev, I.V. Chumanov, V.V. Sedukhin
    Investigation of Valves with a Weld Microstructure Layer Resistant to the Hydrogen Sulfide Corrosion
    73I.V. Ovianikova, A.S. Tarapanov, V.S. Shorkin
    Enhancement of Complex Method of Analyzing and Forecasting High-Performance Forming Processes
    74A.V. Tyuhta, Y.V. Vasilenko, A.M. Kozlov
    Ways to Enhance Environmental Flat Grinding by Improving the Technology of the Coolant Supply
    75A.M. Kozlov, A.A. Kozlov, Y.V. Vasilenko
    Modeling a Cylindrical Surface Machined by a Non-Circular Face Tool
    76S. Ambrosimov, G. Harlamov, А. Cherepenko
    Kinematic Model of Complex Surfaces Formation with Three None Linear Movements Forming
    77A.L. Kheifetc
    Geometrically Accurate Computer 3D Models of Gear Drives and Hob Cutters
    78S. Shevchenko, A. Mukhovaty, O. Krol / Шевченко С.В., Муховатый А.А., Кроль О.С.
    Geometric Aspects of Modifications of Tapered Roller Bearings
    Геометрические аспекты модификации конических роликоподшипников
    79P.P. Pereverzev, A.V. Akintseva
    Model of Cutting Force while Managing Two Regime Parameters in the Process of Internal Grinding
    80P.P. Pereverzev, A.V. Akintseva
    Mathematical Model for the Internal Grinding Process of a Non-Circular Hole Machining
    81V.P. Smolentsev, S.V. Safonov, V.V. Zolotarev
    Processing of Channels in Heat Engine Filters
    Section 1.4. Surface transport and technological machines
    1A.V. Keller, A.A. Shelepov, D.I. Istomin
    Study on the Screw-Ball Differential Gear Operating Process at Car Movement
    2V. Kushnir, O. Benyukh, A. Kushnir
    Optimal Operation of the Water-lifting Unit in Determining the Water Flow in the Water Source
    4В.В. Шишков
    Пуск холодного дизеля. Моделирование процессов в цилиндре
    6A.A. Malozemov , V.N. Bondar, V.S. Kukis
    Improvement of the Forced Diesel Engines Cold Starting Characteristics by Oil Injection into the Cylinder
    5A.A. Malozemov, V.N. Bondar, S.I. Cherepanov
    Experimental Research of Forced Diesel Engine with Oil Temperature Control System in Cold Ambient Conditions
    7V.L. Polyacko, V.S. Morozova, V.S. Goun
    Environmental Performance Improvement in Gasoline Engines with External Mixture Formation
    8V.S. Goon, V.S. Morozova, A.A. Bakin
    Effect of Transient Time on Diesel Engine Environmental and Dynamic Parameters
    9V. Kushnir , N. Gavrilov, S. Kim
    Justification of the Design of the Two-shaft Mixer of Forages
    10A.V. Lysyannikov , V.G. Shram, N.N. Lysyannikova
    The Optimal Parameters of Installation of the Snow Removing Blade
    11A. Gritsenko, S. Kukov, K. Glemba / Гриценко А.В., Куков С.С., Глемба К.В.
    Theoretical Underpinning of Diagnosing the Cylinder Group during Motoring
    Теоретическое обоснование диагностирования цилиндропоршневой группы в режиме прокрутки двигателя стартером
    12A. Plaksin, A. Gritsenko, K. Glemba / Плаксин А.М., Гриценко А.В., Глемба К.В.
    Experimental Studies of Cylinder Group State During Motoring
    Экспериментальные исследования технического состояния цилиндропоршневой группы в режиме прокрутки двигателя стартером
    13I.I. Lyubimov, A.N. Melnikov, N.A. Trubin
    The Control System Improvement of the City Motor Transportation
    14A.N. Melnikov, I.I. Lyubimov, K.I. Manayev
    Improvement of the vehicles fleet structure of a specialized motor transport enterprise
    15E.A. Kuimov, S.A. Plotnikov
    Evaluation of the Economic Efficiency of Various Alternative Fuels in Transport
    17V.S. Velikanov , E.A. Ilina, N.V. Dyorina
    Structural and Circuit Design Solution Arguments of Mine Excavators Ergonomics Management
    18A.P. Komissarov, Y.A. Lagunova, O.A. Lukashuk
    Evaluation of single-bucket excavators energy consumption
    19A.S. Pereverzev , B.A. Semenikhin
    Car Windshield Protection
    20M.V. Lyashenko, E.V. Klementiev, N.S. Sokolov-Dobrev
    Multifunctional Test Stand for Researching of Main Operational Characteristics of the Automotive Transmission
    21V.V. Shekhovtsov, N.S. Sokolov-Dobrev, P.V. Potapov
    Decreasing of the Dynamic Loading of Tractor Transmission by means of Change of the Reactive Element Torsional Stiffness
    22M.V. Lyashenko, A.V. Pobedin, P.V. Potapov
    Analysis of Possible Dynamic Vibration Dampers Uses in Tractor Cabins Suspensions
    23A.V. Pobedin, A.A. Dolotov, V.V. Shekhovtsov
    Decrease of the Vibration Load Level on the Tractor Operator Working Place by Means of Using of Vibrations Dynamic Dampers in the Cabin Suspension
    24S. Shepelev, V. Shepelev, Z. Almetova / Шепелев С.Д., Шепелев В.Д., Альметова З.В.
    Optimization of Technical Equipment for Crop Sowing Processes
    Оптимизация технического оснащения посевных процессов в растениеводстве
    25A.A. Koshurina, M.S. Krasheninnikov, R.A. Dorofeev
    Strength Calculation and Analysis of Equalizer Beam Embodiments for the Operated Equalizing Beam Suspension of the Universal Rotor-Screw Rescue Vehicle for the Arctic
    26M.I. Filatov, V.V. Trunov, E.V.
    Frolova Car Hood Space Temperature Condition Management
    27D. Vdovin , I. Chichekin / Вдовин Д.С., Чичекин И.В.
    Loads and Stress Analysis Cycle Automation in the Automotive Suspension Development Process
    Автоматизация цикла расчетов нагрузок и оценки прочности при проектировании подвески автомобиля
    28S. Chepkasov, G. Markin, A. Akulova
    Suspension Kinematics Study of the "Formula SAE" Sports Car
    29V.S. Kukis, А.V. Raznoshinskaia
    Characteristics of the Diesel 4CHN13/15 Working Process with Exhaust Gases Recirculation and their Cooling in the Vortex Tube
    31V.V. Blednykh, P.G. Svechnikov, I.P. Troyanovskaya
    Moldboard Surface Universalization of the Ploughshare Operating Unit
    32К.Н. Войнов
    Форма и покрытие автомобильных дорог
    33A.A. Reutov , V.V. Kobishchanov, V.I. Sakalo
    Dynamic Modeling of Lift Hoisting Mechanism Block Pulley
    34I.N. Serpik, I.V. Mironenko, V.I. Averchenkov
    Algorithm for Evolutionary Optimization of Reinforced Concrete Frames Subject to Nonlinear Material Deformation
    35S.E. Gavrishev, К.V. Burmistrov, N.G. Tomilina
    Increasing the Work Scope of Conveyor Transport at Mining Companies
    36V.A. Gorelov, A.I. Komissarov / Горелов В.А., Комиссаров А.И.
    Mathematical Model of the Straight-line Rolling Tire – Rigid Terrain Irregularities Interaction
    Математическая модель взаимодействия шины с твердыми неровностями опорной поверхности для случая прямолинейного качения колеса
    37I. Timofeev, A. Bolshunov, A. Avdeeva
    Justification of Lever Arrangement Parameters for Friction-Type Traction Gear
    38B.T. Budai
    On the Possibility of Reducing the Objective Lens Diameter in the Optoelectronic System
    39A.I. Nefed’ev, G.I. Sharonov
    Development of Microprocessor-Based Car Engine Control System
    30V.A. Kozminykh, A.V. Raznoshinskaia
    Energy Datum of the Flow of Exhaust Gases of the Internal Combustion Engine
    40G.I. Pavlov, А.P. Abrakovnov, R.R. Khaliulin
    Development of the Autonomous Heat Gun for Repair and Maintenance of Utilities
    41M.S. Minkin, D.N. Kuimov, A.D. Lukyanov
    Development of the Energy-Saving Air Regeneration System in Production Rooms
    42N.A. Fomenko, S.V. Aleksikov, S.G. Artyomova
    High Pressure Piping of Tractive Transport Vehicles
    43A.Sh. Khusainov, A.A. Glushchenko
    Theoretical Prerequisites for Lowering Piston Temperature in Internal Combustion Engines
    46I. Taratorkin, V. Derzhanskii, A. Taratorkin
    Experimental Determination of Kinematic and Power Parameters at the Tracked Vehicle Turning
    47O.V. Komarov, V.L. Blinov, V.A. Sedunin
    On Technical Performance Estimation of a Gas Turbine with Variable Power Turbine Vanes
    48B. Arav, R. Shulman, V. Dooun
    Basic Concepts for Forcing of Low-Power Micro Turbine Generators
    49V.A. Kalmakov, A.A. Andreev , G.N. Salimonenko
    Development of Formula Studnt Electric Car Battery Design Procedure
    50Z. Almetova, V. Shepelev, S. Shepelev / Альметова З.В., Шепелев В.Д., Шепелев С.Д.
    Cargo Transit Terminal Locations According to the Existing Transport Network Configuration
    Месторасположение грузового транзитного терминала с учетом существующей конфигурации транспортной сети
    Part 2. Materials engineering and technologies for production and processing
    Section 2.1. New functional materials and technologies
    1 S.M. Gorbatyuk, A.A Gerasimova, N.N. Belkina.
    Applying Thermal Coatings to Narrow Walls of the Continuous-Casting Molds
    2 V.V. Zimich.
    Magnesium Dry Mixes for Outer Wall Decoration
    4 F. Ismagilov, V. Vavilov and D. Farrakhov.
    Research the Properties of Temperature High-Coercivity Permanent Magnets NdFeB
    5 M.A. Vasilyeva.
    Justification of the Choice Matrix Material of the Magnetoactive Elastomer for Working Camera-Channel Peristaltic Unit
    6 N.V. Naumenko, I.V. Kalinina.
    Sonochemistry Effects Influence on the Adjustments of Raw Materials and Finished Goods Properties in Food Production
    7 V.A. Dubrovsky, M.V. Zubova, M.U. Potylitsyn.
    Development and Implementation of Energy Efficient Burners at Power Stations
    8 V.A. Dubrovsky, Y.V. Isakov, I.I. Potapov.
    Water-Coal Suspension Preparation Using Electrohydraulic Coal Breakage Method
    9 S.E. Krylova, E.V. Romashkov, A.V. Kuznetsov.
    Peculiarities of Thermal Hardening of Experimental Sparingly-Alloy Tool-Class Steels
    10 S.A. Pakhomova, M.V. Unchikova and R.S. Fakhurtdinov.
    Gear Wheels Surface Engineering by Deformation Hardening and Carburization
    11 V.Y. Stolbov, M.B. Gitman, and S.I. Sharybin.
    Application of Intelligent Technology in Functional Materials Quality Control
    12 L.V. Radionova, Yu.M. Subbotina.
    Study of Aging Cold Rolled and Hot Dip Galvanized Automotive Steel
    13 N.A. Shaburova, T.D. Ratmanov, D.D. Larionov.
    Process Engineering of Dimensional Fused Silica Etching
    15 A.G. Tiagunov, V.S. Tsepelev, G.V. Tiagunov.
    Amorphous Copper-Based Alloys: Structure, Technology and Properties
    16 E.V. Ageev, A.Yu. Altukhov, and S.S. Gulidin.
    X-ray Microanalysis of Hardmetal Powder, Produced by Electroerosion Dispersion of VK8 Alloy in Kerosene Environment
    17 E.A. Marinin, S.P. Grachev, and A.L. Flaxman.
    Increasing the Intensity of Cementation Process of Tool Low-Alloy Steels by Surface Laser Treatment
    18 D.K. Kostrin and A.A. Lisenkov.
    Synthesis of Transition Metals Carbide Compounds in the Vacuum Arc Discharge Plasma
    19 A.V. Kirichek, A.V. Soloviyov and S.A. Silantiev.
    Opening Wave Strain Strengthening
    20 N.A. Shaburova, V.V. Krymsky.
    Electropulse Machining of Metals
    21 M.A. Matveeva, I.V. Chumanov.
    Increasing Corrosion Properties of Steel 04Cr25Ni6NMo3
    24 S. Nevskii, V. Sarychev, S. Konovalov, D. Kosinov, I. Komissarova.
    Mathematical Model of Nanostructure Formation in Binary Alloys at Electron Beam Treatment
    25 O.I. Shavrin, A.N. Skvortsov.
    Nanostructured Strengthening of Springs and Spring Steels
    26 S.I. Yaresko.
    Application Features of the Cutting Tool, Hardened by Laser Pulsed Radiation
    27 G.G. Mikhailov, A.G. Morozova, T.M. Lonzinger / Михайлов Г.Г., Морозова А.Г., Лонзингер Т.М.
    Titanium-Containing Composite Sorbent-Photocatalyst Based on Calcium Silicates and Aluminosilicates
    Титансодержащий композиционный сорбент-фотокатализатор на основе силикатов и алюмосиликатов кальция
    28 V.V. Krymsky, E.V. Litvinova and J.G. Mingazheva.
    Electropulse Processing of Gold-Bearing Ore
    29 V.I. Mironov, O.A. Lukashuk.
    Calculation of Metalwork Life with Allowance for Cyclic Degradation of Material in Operation
    30 S.A. Barannikova, L.B. Zuev, A.V. Bochkareva, A.G. Lunev, Yu.V.Li, G.V. Shlyakhova.
    Evolution of Macro-Scale Plastic Flow Localization of Tri-Layered Stainless Steel - Low Carbon Steel - Stainless Steel Metal with Digital Image Correlation Method
    31 D.A. Vinnik, S.A. Gudkova, R. Niewa.
    Barium Hexaferrite Single Crystal Growth Using PbO and Na2O Based Flux
    32 D.A. Vinnik, M.V. Sudarikov, V.E. Zhivulin.
    Experimental Study of Ba7Fe4O13, Ba3Fe2O6, Ba2Fe2O5, BaFe2O4 Barium Ferrites
    36 V.N. Shtennikov.
    Mathematical Modeling of Mechanized Technologies Soldering
    37 A.V. Senin.
    Carbon in Solidphase Reduction of Oxides
    39 I.Y. Potoroko, A.A. Ruskina.
    Modeling of Potato Convenience of Exposure Effects of Ultrasound
    40 L.A. Tsirulnichenko, N.V. Popova.
    Effects of the Sonochemistry in the Rheology of Food Media
    41 S.N. Chebotarev, A.S. Pashchenko, D.A. Arustamyan / Чеботарев С.Н, Пащенко А.С., Арустамян Д.А.
    Microcrystalline and Amorphous Photovoltaic Silicon Materials Performance Optimization
    Оптимизация характеристик микрокристаллического и аморфного кремния для фотоэлектрических устройств
    42 S.B. Egorov, A.V. Kapitanov, D.A. Loktev.
    Modern Methods and Technological Solutions for Effective Processing of Gear Wheels
    43 V.M. Salganik, D.N. Chikishev, E.B. Pozhidaeva.
    Influence of Steel Chemical Composition and Modes of the Thermomechanical Treatment on Mechanical Properties of a Hot Rolled Plate
    44 M.P. Shalimov, E.B.Votinova.
    Optimization of Welding Electrode Coating Composition Based on Simulation of Interaction Processes in Metal-Slag-Gas System
    45 N.Y. Dudareva, M.M. Abramova and R.V. Kalschikov.
    Corrosion-Resistance of MAO-Coatings on Al-Si Alloys
    46 K.M. Zeyde.
    Analysis of Electrodynamics Properties of Materials With High Dispersity Metal Powder in Axial Moving Systems
    47 E.G.Demyanenko, I.P. Ророv.
    Study of Thermal Resistance and Mechanical Properties of Thin Sheets of Low-Alloyed Aluminum Al-Cu-Mn and Al-Mg-Si Alloys
    48 I.V. Zlobina, N.V.Bekrenev.
    The Influence of Electromagnatic Field Microwave on Physical and Mechanical Characteristics of CFRP (Carbon Fiber Reinforced Polymer) Structural
    49 O.V. Samoilova and E.A. Trofimov.
    Phase Equilibria in the Copper-Rich Corner of the Cu–Ni–Si–Cr System
    50 S.R. Shekhtman, N.A. Sukhova.
    Synthesis of Multilayer Vacuum Ion-Plasma Coatings Ti-Tin during the Surface Modification
    51 V.P. Belichenko, A.S. Zapasnoy, A.S.
    Miron'chev and P.V. Shestakov. The Technology of the Near-Field Interference Microwave Sensing
    52 V.M. Chernyshev, N.P. Shabelskaya.
    Comparative Analysis of Catalytic Activity in Complex Nio-Cuo-Fe2o3-Cr2o3 Oxide System of Different Production Technologies
    53 T.M.Makhneva, V.B.Dement’yev.
    Modification of Nanostructured Maraging Steels Surface with Atmospheric Nitrogen at Steel Hardening in Confined Space
    54 R.G. Galin, N.A. Shaburova, D.A. Zakharyevich.
    Thermal Diffusion Galvanizing in Ferriferous Zinc Powder
    55 L.N. Bezmennikova, V.A. Zhukov and A.A. Zhelezniak.
    Diagnosis of Thermal Processes in Induction Motors of the Electrical Objects
    56 E.R. Zvereva, O.S. Zueva and R.V. Khabibullina.
    Improvement of Liquid Organic Fuel Oils Operational Characteristics with Additives
    57 S.A. Sozykin, V.P. Beskachko and G.P. Vyatkin.
    The Structure of Carbon Nanotube Exohedral Complexes with Lithium in a Wide Range of Concentrations
    59 S.P. Nefedyev, K.N. Vdovin and A.N. Emelyushin.
    Peculiarities of Forming of the Wear-Resistant Cast Iron Coating Structure on Steel 45 upon Plasma-Powder Surfacing
    60 V.A. Golenkov, S.J. Radchenko, I.M. Gryadunov.
    Hardening Process by Complex Local Deformation Investigation
    61 Yu.I. Kretova, S.P. Merenkova, A.A. Lukin.
    Modern Technological Possibilities of the Environmental Safety of Food Production
    62 S. Konovalov, V. Kormyshev, V. Gromov and Yu. Ivanov.
    Metallographic Examination of Forming Improved Mechanical Properties via Surfacing of Steel HARDOX 450 with Flux Cored Wire
    63 N.A. Mashkin, E.A. Bartenjeva.
    Foamer Influence on the Foam Concrete Properties Obtained in the High-Speed Foam Generator
    64 J.L. Tchigirinsky, P.H. Trung, A.A. Lipatov.
    Features of Processing of Corrosion Resistant Steels
    65 V.G. Shmorgun, A.I. Bogdanov, A.O. Taube.
    Effect of the High-Heating on the Chemical and Phase Composition of the Al-Ni-Cr Layered Coatings
    66 E.A. Yatsenko, V.A. Smolii, B.M. Goltsman.
    Development of Resource-Saving Cellular Glass Technology and Materials Based On It
    67 В.А. Смолий, Е.А. Яценко, А.С. Косарев.
    Строительный теплоизоляционный стекломатериал на основе золошлковых отходов ТЭС
    68 Е.Ю. Ремшев, В.В. Кузнецов, С.А. Яковлев.
    Исследование влияния фторорганического покрытия высокоточной штамповки тугоплавких и легких сплавов в приборостроении
    69 G.I. Raab, E.I. Fakhretdinova, R.Z. Valiev.
    The Study of the Strained State of the Long-Length Aluminum Billet Obtained by a New Method - Multi-ECAP-Conform
    71 F.F. Musin, A.Y. Medvedev and B.O. Bolshakov.
    Linear Friction Welding of a Commercial Aluminum Alloy
    72 F.F. Musin, B.O. Bolshakov and E. Domracheva.
    Superplastic Behavior of an Al-Cu-Mg-Mn-Ag Alloy
    73 N.A.Vil'bitskaya, S.A.Vilbitsky, A.G.Avakyan.
    Use of Mathematical Modeling in Building Ceramics Functional Properties Studies
    74 N.Yu. Kiryushina, N.S. Lupandina.
    Pore-Forming Additives for Ceramic Gravel Production Made of Technogenic Materials
    75 N.R. Galyavetdinov, R.R. Safin.
    Analysis of Physico-Mechanical Properties of Composites Based On Polylactide and Thermally Modified Wood Fibers
    76 V.V. Novokreschenov, R.V. Rodyakina, M.A. Karimbekov / Новокрещенов В.В., Родякина Р.В., Каримбеков М.А.
    Investigation of Relationship between Structural and Crystallographic Condition of Some Constructional Materials and Their Mechanical Properties
    Исследование связи между структурно-кристаллографическим состоянием некоторых конструкционных материалов и их механическими свойствами
    77 V.G Shmorgun, O.V. Slautin, R.E. Novikov.
    The Structure and Phase Composition of the Diffusion Zone in a Titanium and Steel Composite
    78 M.Yu. Livshitc, E.A. Yakubovich.
    Optimal Сontrol of Technological Process of Carburization of Automotive Gears
    79 S.P. Samoilov, A.O. Cherniavsky.
    Work Softening and Low Cycle Fatigue of Molybdenum Alloy under Force-Controlled Loading and Elevated Temperatures
    80 D.N. Kuimov, M.S. Minkin, A.D.Lukyanov.
    Low-Sulfur Fuel and Oil Production
    81 A.M. Pesin, D.O. Pustovoytov.
    FE Analysis of the Applicability of the Shear-Compression Testing to the Modeling of the Asymmetric Rolling Process
    82 E.G. Demyanenko, I.P. Ророv.
    The Effect of the Additional Processing During the Crystallization of a Melt of the AD0 Aluminum Alloy on the Size of Grains
    83 D.V. Pronichev, L.M. Gurevich and M.D. Trunov.
    The Impact of Explosion Welding Parameters on Al/Cu Laminated Composites Interface
    84 V.G. Shmorgun, D.A. Evstropov and M.D. Trunov.
    Investigation of the Diffusion Processes at the Interface of the Cu/Ti Metal Composite
    85 С.М. Слободян, В.С. Тетерин, В.С. Деева.
    Оптимизация параметров диспергатора потока фракций вязкой среды
    86I.S. Platova, V.A. Nekit, N.N. Ogarkov.
    Improving the Controlled Cooling After Wire Rod Rolling in the Finishing Block of Stands
    87 O.A. Chikova, B.V. Ovsyannikov, P.L. Reznik.
    The Study of the Dissolution AlZr2 Ligatures in the Liquid Alloy AlMg6Mn1
    88 M.S. Minkin, D.N. Kuimov A.D. Lukyanov.
    Separation of Fine Particles with the Set Dimensional and Physical Characteristics by Method of the Crown Separation
    89 N.S. Klochkov, U.P. Egorov, C. Mapelli and I.K. Zabrodina.
    Tin and Nickel Influence on the Structure and Properties of the Leaded Bronze Obtained by means of the Centrifugal Casting
    90 V.S. Deeva, S.М. Slobodyan and V.S.Teterin.
    Optimization of Oil Particles Separation Disperser Parameters
    91 A.E. Bedelbayeva, G.K. Lukhmanova.
    Trends and Problems of Biofuel Market Development in Kazakhstan
    92 G.I. Raab, Yu.M. Podrezov, G.N. Aleshin.
    Dislocation Structure Evolution during Plastic Deformation of Low-Carbon Steel
    93 A.M. Akhmed’yanov, S.V. Rushchits, M.A. Smirnov.
    Hot Deformation of Martensitic and Supermartensitic Stainless Steels
    94 V.E. Eremyashev, E.A. Trofimov, Т.O. Podbornykh.
    The Effect of Aluminum Oxide Additives on the Phase Equilibrium in Borosilicate Systems and Crystallization of Borosilicate Melts
    95 O. Berdnikova, V. Pozniakov and O. Bushma / Бердникова Е.Н., Позняков В.Д., Бушма А.И.
    Laser and Hybrid Laser-Arc Welding of High Strength Steel N-A-XTRA-70
    Лазерная и гибридная лазерно-дуговая сварка высокопрочной стали N-A-XTRA-70
    99 V.V. Goman, S.A. Fedoreev.
    Plating Technology for Contact Joint Performance Improvement in Electrical Equipment
    100 V.V. Goman, S.A. Fedoreev.
    Experimental Study of Contact Joint Characteristics in Electrical Equipment
    101 D.A. Vinnik, E.A. Trofimov, D.A. Zherebtsov.
    Experimental Study and Thermodynamic Modeling of Phase Equilibria in the Pbo-Fe2O3 System
    102 V.G. Perederiy, B.G. Gasanov, P.V. Sirotin.
    Determination Features of the Component Diffusion Coefficients of the Fe-Cr-Ni-Gr Powder Systems Sintering
    103 S.K. Iliopolov, E.V. Uglova, K.D. Golyubin.
    Determination of Suitable Binder Grade According to the Superpave Mix Design Method for Southern Russia
    106 A.V. Sidashov, A.T. Kozakov, S.I. Yaresko.
    Auger and X-Ray Photoelectron Spectroscopy Study of the Tribocontact Surface after Laser Modification
    107 N.A. Myasnikova, A.V. Sidashov and Ph.V. Myasnikov.
    The Formation and Functioning of Surface Nanostructures at Tribocontact
    108 P.A. Lykov, R.M. Baitimerov and D.A. Zherebtcov.
    Gas Atomization of the Liquid 82N7HSR Nickel Base Alloy to Produce Micropowder for Additive and Coating Technologies
    109 P.A. Lykov, S.B. Sapozhnikov,R.M. Baitimerov.
    The Manufacturing of the Alsi12-Al2O3 Composite Powder for Additive Production Methods
    110 V.M. Lipkin, M.S. Lipkin, V.I. Lachin.
    The Mechanism of Water-Soluble Polymer Аdditives and Parameters of the Pulse Electrolysis Effect on the Size Distribution of the Electrolytic Copper Powder
    112 A.N. Anikeev, I.V. Chumanov, V.I. Chumanov.
    The Study of the Contact Angle of Silicon Carbide High-carbon Iron Melt
    113 I. Zakharchuk, E. Mikhalitsyna and E. Lahderanta.
    Magnetic and Microstructure Study of Thin Films of Fecunbmosib FINEMET Alloy
    114 А.V. Shaparev, I.A. Savin.
    Calculation of the Amount of the Reduction Required for the Formation of Compound Layers during Cold Rolling of Bimetals
    115 N.K. Krioni, A.D. Mingazhev, I.R. Kuzeev / Криони Н.К., Мингажев А.Д., Кузеев И.Р.
    Application Of Ion-Plasma Coatings With Low Droplet Phase Content
    Нанесение ионно-плазменных покрытий с по-ниженным содержанием капельной фазы
    116 N.K. Krioni, A.D. Mingazhev, I.R. Kuzeev / Криони Н.К., Мингажев А.Д., Кузеев И.Р.
    Technologies for the Manufacturing of Multi-Layered Hollow Structures by Superplastic Forming
    К вопросу о технологии изготовления многослойных полых конструкций сверхпластической формовкой
    117 K.N. Vdovin, N.A. Feoktistov, D.A. Gorlenko.
    The Effect of the Cast High-Manganese Steel Primary Structure on its Properties
    Section 2.2. Innovation and cost-effective use of resources of metallurgy industry
    1 P.M. Kosianov.
    New Method for Determining the Electron Streams in the Metals from the Measured Flows of Scattered Primary Radiation
    2 V.B. Dementyev, T.N. Ivanova.
    Investigation of the Surface Layer Structure of High-Chromium and High-Strength Steels at the Variation of the Heating Temperature
    3 G.N. Safronov, N.N. Safronov, L.R. Kharisov.
    SHS Ferroaluminum Obtained from the Disperse Waste of Engineering
    4 A.N. Makarov, M.K. Galicheva, A.V. Kuznetsov.
    Changing the Arc Efficiency During Melting of a Charge in Arc Steel Melting Furnaces
    5 M.V. Kharchenko, R.R. Dema., V.I. Bilichenko.
    Energy Reduction Technologies Based on the Lubricant Supply in the Roll Contact System "Quarto" during the Hot Strip Rolling
    6 L.G. Kolyada, E.V. Tarasyuk, N.L. Kalugina.
    Technology of Packing Materials for Metal Products
    7 A.S. Limarev, M.Y. Ushakov, I.Y. Mezin, I.A. Mikhailovskiy.
    Review of the Main Requirements for Performance and Quality Characteristics of the Railway Bolting
    8 A.E. Gulin, M.A. Polyakova, E.M. Golubchik.
    Effect of Stress-Strain State During Combined Deformation on Microstructure Evolution of High Carbon Steel Wire
    9 T.V. Sviridova, O.B. Bobrova, E.A. Volkova.
    Determination of the basic parameters of the recovery process for extracting iron from iron and steel slag
    12 D.A. Musaeva, E. Baake, V.K. Ilin.
    Experimental Investigation of Al-alloy Directional Solidification in Pulsed Electromagnetic Field
    13 E.V. Gunina.
    The Study of the Fluoroapatite of the Fine Coal Yuzhno-Yakut Basin
    14 S.K. Kiseleva, L.I. Zaynullina, N.Y. Dudareva.
    Influence of the Microstructure Al-12%Si Alloy on the Properties of the Oxide Layer Formed With MAO
    15 S.K. Sibagatullin, A.S. Kharchenko, M.V. Potapova.
    Neural Network Modeling of Coefficient of Burden Resistance to the Gas Movement in the Lower Part of the Blast Furnace in Conditions of Operation with Coke Nut
    16 В.А. Иванова, Е.О. Шамина.
    Оценка ресурсосберегающей способности литейного кокса
    17 G.I. Pavlov, O.R. Sitnikov, A.V. Kochergin.
    On Advanced Recycling Technology for Cutting Fluid and Waste Oils Produced at the Metallurgical Enterprises
    18 E.P. Nikolaeva / Николаева Е.П.
    Structure Investigation of the Constructional Steel St3ps after Argon-Arc Plasma Treatment
    Исследование структуры конструкционной стали Ст3пс после обработки аргонодуговой плазмой
    19 A.N. Shapovalov, R.R. Dema and S.P. Nefedyev.
    Efficiency Improvement of Sintering as a Result of Surface-Active Substance Use in Pelletizing at the JSC "Ural Steel"
    20 O.I. Nokhrina, I.D. Rozhihina, I.E. Hodosov.
    Coal-Based Direct Reduction of Metallized Product
    21 V.M.Kolokoltsev, A.S.Savinov, A.S.Tuboltseva.
    Calculation of Impeded Shrinkage Casting Processes in Sand Layer
    22 S.V. Anakhov, Yu.A. Pyckin, A.V. Matushkin.
    Narrow Jet Plasma as the Energy Efficient and Safe Technology for Metal Cutting
    23 Т.А. Vasilenko.
    Use of the Electric Steel Melting Slag in Production of the Expanded Clay Gravel
    24 T.R. Stepanova, T.V. Prokhorova.
    Modeling of the High Temperature Creep and Rupture under the Complex Stress State
    27 R.G. Galin, D.A. Zakharyevich, S.V. Rushchitz.
    Formation and Structure of Diffusional Zinc Coatings Formed in Nanocrystallized Zinc Powders
    28 A.N. Dildin, V.I. Chumanov.
    Liquid-Phase Recovery of the Metallurgical Slag Using Induction Heating Installation
    29 G.K. Muldasheva, I.V. Zlobina, N.V. Bekrenev.
    Experimental Substantiation of a Method of Improving the Efficiency of Ultrasonic Drilling of Small Diameter Holes
    30 Y.S. Bakhracheva, A.V. Vasilyev and T.N. Petikova.
    Solution to the Diffusion Problem in the Thermocyclic Nitrocementation of Steel
    31 A.S. Sozykina, K.Y. Okishev, A.G. Grebenshchikovam and D.A.Mirzaev.
    Kinetic Description of (Cr, Fe)7C3 Carbide Dissolution in Austenite of High-Carbon Fe–Cr–C Ternary Alloys
    32 A.V. Verkhovykh, A.A. Mirzoev, G.E. Ruzanova, D.A. Mirzaev and K.Yu. Okishev.
    Interaction of Hydrogen Atoms with Vacancies and Divacancies in Bcc Iron
    33 Yu.D. Koryagin and V.L. Il'ichev.
    Estimation of the Heat Stability of Hardened Cr–V Cast Irons
    34 V.L. Steblyanko and A.P. Ponomarev.
    Plasma-Electrolytic Treatment as an Innovative and Resource-Saving Technology of Metal Surface Treatment
    Part 3. Control and automation systems for manufacturing in the industrial production areas
    Section 3.1. Control systems and their industrial application
    2Sotnikov E.A., Osminin A.T.
    Determination of Minimum Level of Available Carrying Capacity of Sections where the Effective Use of Connected Train Formation and Driving Technology is Possible
    3Safin I.R., Lukyanov S.I., Bodrov E.E.
    Calculation Method of an Unwinding Machine Electric Drive’s Breaking Torque Alteration on a Rebar Production Line
    4Зубок А.А.
    Синтез систем со слабодемпфированными объектами регулирования
    5Barankova I., Mikhailova U., Lukianov G.
    Automated Control System of a Factory Railway Transport Based on ZigBee
    6Brylina O.G.
    Multi-Zone Pulse Regulator
    7Rapoport E.Ya., Pleshivtseva Yu.E. / Рапопорт Э.Я., Плешивцева Ю.Э.
    Method of Parametric Optimization of Program Control Actions in Boundary Value Problems of Optimal Control for Distributed Parameter Systems
    Метод параметрической оптимизации программных управляющих воздействий в краевых задачах оптимального управления системами с распределенными параметрами
    8Eremin E.L., Shelenok E.A.
    Discrete Robust Control Algorithm for One Class of Non-Affine Nonlinear SISO Systems
    9Eremin E.L., Shelenok E.A.
    Simulation Modeling of Robust Control System for Nonlinear Non-Affine Objects
    10Mitroshin V.N., Mitroshin Y.V. / Митрошин В.Н., Митрошин Ю.В.
    Optimal Control of Cable Insulation Cooling at Extrusion Line
    Оптимальное управление охлаждением кабельной изоляции при ее наложении на экструзионной линии
    11Efremov A.M., Subbotina T.Yu.
    Use of the IEC 61850 Series of Standards to Create PCS HPP in Russia Background and Application Opportunities
    12Nikolaev A.A., Tulupov P.G., Astashova G.V.
    The Comparative Analysis of Electrode Control Systems of Electric Arc Furnaces and Ladle Furnaces
    14Gelrud Ya.D., Loginovskiy O.V.
    Project Management for Different Stakeholders
    15Loginovskiy O.V., Gelrud Ya.D., Plotnikova N.V.
    The Formation of IT Systems of Industrial Enterprises on the basis of Standard Design Options and Unification of Subsystem Interconnection Modules
    16Galdin M.S., Andreev S.M.
    Model-Based Predictive Control of Twin-Roll Strip Casting Thermal Mode
    17Liberman Ya.L., Letnev K.Yu.
    Automated System for Preventing Accidents with Open-Pit Transport
    19Rutkowski A.L., Kovaleva M.A., Tedeeva N.V.
    The Method of Solving the Automated Control System Design Problem Through Complicated Technological Complex
    20Rutkowski A.L., Kovaleva M.A., Tedeeva N.V.
    The Research of Systems with Incomplete Information in Complex Control Object
    21Bolotaeva I.I., Zarochencev V.M.
    The Research of the Acid Mode of Neutral Leaching for the Purpose of Optimization
    23Sadov V.B., Plotnikova N.V.
    Main Functions of Control System of the Installation with the Drive Sucker Rod Pump
    25Galachieva S.V., Kumaritov A.M., Sokolova E.A.
    The Question of The Solution to the Problem of Prediction of the Critical Conditions
    26Klimenko A.B., Melnik E.V., Ivanov D.I.
    The Configuration Generation Problem for the Informational and Control Systems with the Performance Redundancy
    27Bogdanov A.V., Sazonova T.V., Bondarev A.V.
    Parameters of the Quality and Power Efficiency of the Automatic Controlling the Steam Boiler with the Indistinct Adaptation of the PID-adjuster in the fuzzyTech’s Environment
    28Andreev S.M., Parsunkin B.N.
    Search System of Fuel Combustion Control in Industrial Furnaces
    30Tazmeev A.Kh., Tazmeeva R.N.
    Managing the System of Circulation of Electrolyte in the Plasma Generator with Liquid Electrodes
    31Kvyatkovskaya I.Yu., Popov G.A., Nguyen Xuan Manh
    Analysis Possibilities for using Fiber Optic Sensors in Intelligent Building Control System
    32Buzarov M.M., Voloshin S.B., Shevrikuko U.F.
    The Development of Complex Navigation System of the Unmanned Aerial Vehicle for Operation in the Conditions of Mountain Territories
    33Teterin E., Zhuravlev D., Berchuk D.
    Mobile Extrusion Machine for the Production of Composite Filaments for 3D Printing
    34Ryabchikov M.Yu., Ryabchikova E.S., Grebennikova V.V.
    Automated Support System for Administration of Steel Processing in the Ladle Furnace with a Function of Process Staff Training
    35Eremenko Y.I., Glushchenko A.I., Fomin A.V.
    PI-Controller Parameters Tuning Method to Reject Disturbances Acting on Heating Furnaces
    36Emaletdinova L.U., Kabirova A.N., Konopelko R.S.
    A Method of Constructing Neuro-Fuzzy Controller based on Adaptive Algorithm of Self-Organizing Network to Control the Angle of Heel of the Unmanned Aerial Vehicle
    37Kuzishchin V.F., Merzlikina E.I., Hoang Van Va
    Study of the Efficiency of the Control System with Smith Predictor using a Simulator based on Controller OWEN PLC
    38Abramov N.V., Dyagilev V.F.
    The Control of Complex Systems with Account of Relations Stabilization
    39Bukeikhanov N.R, Gvozdkova S.I., Butrimova E.V.
    The Automated Resource Saving System of Use and Regeneration of Lubricant-Cooling Technological Liquid based on Epilam
    40Карагодин В.В., Горин В.А., Смирнов С.В.
    Метод последовательных опорных решений и его применение для нахождения оптимального по быстродействию управления линейными неосциллирующими объектами
    41Nyrkov A., Sokolov S., Chernyi S., Chernyakov A., Karpina A.
    Providing the Integrity and Availability in the Process of Data Transfer in the Electronic Documents Management Systems of Transport-logistical Clusters
    42Gavrilova A.A., Salov A.G., Ivanova D.V.
    System Model Analysis of the Management Effectiveness of the Territorial Producing Company and Considering the Interrelations with the Macroenvironment
    43Shiryaev V., Podivilova E.
    Algorithm of Set-Valued State Estimation for Strapdown Inertial Navigation Systems
    44Averchenkov A.V., Kulagina N.A., Averchenkova E.E.
    Condition Monitoring of Machine-Building Complex of the Bryansk Region on the basis of Expert Estimates
    45Gorlenko O.A., Miroshnikov V.V., Borbatc N.M.
    The Analysis of Potential Defects of the Management Decision-Making Process in Complex Organizational Systems
    46Petreshin D.I., Handozhko A.V., Fedonin O.N.
    Development of Software for Self-Learning Technological System
    47Kaspirovich I.E.
    Application of Constraint Stabilization to Nonholonomic Mechanics
    49Mukharlyamov R.G.
    Control of System Dynamics and Constraints Stabilization
    50Shinkarev A.
    Refactoring as Complexity Decreasing Instrument of Representation of Traffic Flow Models Based on Cellular Automata
    51Putov V.V., Stotckaia A.D., Sheludko V.N. / Путов В.В., Стоцкая А.Д., Шелудько В.Н.
    New Technology of Runway Friction Coefficient Measurement and Its Towed Implementation
    Новая технология измерения коэффициента сцепления взлетно-посадочной полосы и реализующий ее буксируемый измерительный комплекс
    52Zimin L.S., Yeghiazaryan A.S.
    Application of Induction Heating Processes of Metal Deformation
    53Safin R.R., Kaynov P.A., Khakimzyanov I.F.
    The Influence of Modes of Preliminary Heat Treatment of Raw Materials in a Drum Apparatus on the Properties and Quality of Wood Fuel
    54Bolshunova O., Korzhev A.
    Sensors for Automatic Moisture Measurement of Bulk and Liquid Materials
    55Krasinkiy A.Ya., Krasinkaya E.M.
    Modeling of Dynamics of Manipulators with Geometrical Consraints as a Systems with Redundant Coordinates
    56Kudryashov A.V., Kalinina A.S., Yagovkin G.N.
    Lighting Regulation Considering Visual Functions
    57Shiriaev V.I., Bragina A.A.
    Control Synthesis of Robotic Manipulator by Lyapunov's Direct Method in Conditions of Incomplete Information
    58Lapeev S.M., Gvetadze S.V., Pahomov A.P.
    New Modes of Incubation and Their Implementation Methodology
    59Filimonova A.A., Barbasova T.A., Kolesnikova O.V.
    Multilevel Resource Planning and Load Management of an Industrial Facility
    60Shutin D., Polyakov R.
    Adaptive Nonlinear Controller of Rotor Position in Active Hybrid Bearings
    61Kazarinov L.S., Barbasova T.A.
    Elliptic Component Analysis
    62Eremenko Y.I., Glushchenko A.I., Fomin A.V.
    On Development of Method to Calculate Time Delay Values of Neural Network Input Signals to Implement PI-Controller Parameters Neural Tuner
    63Galiullin L.A., Valiev R.A.
    Automation of Diesel Engine Test Procedure
    64D.Yu. Bogdanov, G.Ya. Pyatibratov, A.B. Bekin
    System Implementation of Speed Restriction While Developing the Force Compensation Systems
    66Lukyanov A.D., Minkin M.S., Onoyko T.S.
    Control of Precision Positioning of Low Rigid High Inertia Objects
    67Sonkin D.M., Meita R.V., Khrul S.A. / Сонькин Д.М., Мейта Р.В., Хруль С.А.
    One of Possible Approaches to Estimate Availability of Distributed Hardware and Software Systems
    Методология комплексной оценки состояния многоуровневых распределенных систем
    69Valiev R.A., Khuzyatov Sh.Sh.
    Pattern-design Software of Automated Control Systems
    70Shiryaev V., Khadanovich D.
    On the Measurement Noises Adaptation of Set-Membership State Estimation
    71Shaykhutdinov D., Leukhin R., Stensenko I.
    Features of the Control System of Technological Process of Production of Mechatronic Drive based on the Testing of the Magnetic Properties of the Structural Elements
    72Сысоев Н.И., Гринько Д.А., Гринько А.А.
    Повышение эффективности бурения шпуров путем управляемого наложения импульсов осевого усилия и крутящего момента на буровой резец
    73Akhmetsagirov R.I., Nasibullin R.T.
    The Control Parameters of Automatic Control System of the Process of Producing Ferromagnetic Powders by Plasma Erosion of a Metallic Anode
    74Romanov A.M., Slaschev B.V., Zolotykh A.I.
    Highly Reliable Information Network for Distributed Control Systems
    75Lukichev D.V., Demidova G.L.
    Speed Control in PMSM Drive with Non-Stiff Load and Unknown Parameters Using PI- and Fuzzy Adaptive PID Controllers
    76Pokhlebin A.V., Pozdeev A.V., Golyatkin I.A. / Похлебин А.В., Поздеев А.В., Голяткин И.А.
    Control Algorithms of Inelastic Resistance Forces of Hydropneumatic Springs
    Алгоритмы регулирования сил неупругого сопротивления пневмогидравлических рессор
    77Kodkin V.L., Baldenkof A.A., Kachalin A.Y.
    Reducing Resource Consumption in Heating Systems by Optimization of Their Dynamics
    78Zhdanov A., Belyaev L., Morozov V.
    The Control System for Mechatronic Unit of Implantable Left Ventricle Assist Device
    79Kozko A.
    Intelligent Content Managment System For Discussion Forum
    80Prakhova M.Yu., Krasnov A.N., Khoroshavina E.A.
    The Automatic Diagnostic System of Gas Well Flooding
    81 Baskov S.N., Litsin K.V.
    Research of Vector-Pulse Start System of Synchronous Motor with Intermediate Transformer and Sensorless Determination of Angular Rotor Position with Mathematical Methods
    Section 3.2. Industrial mechatronics, automation and robotics
    1Shoshiashvili M.E., Shoshiashvili I.S.
    Principles of Construction of Control Devices for Mechatronic Pipe-lay Complexes
    2Шошиашвили И.С., Шошиашвили М.Э.
    Система управления роботизированным траншеекопателем
    3Vokhmintsev A., Timchenko М., Yakovlev K.
    Simultaneous Localization and Mapping in Unknown Environment using Dynamic Matching of Images and Registration of Point Clouds
    4Smirnov Y.S., Yurasova E.V., Safronov V.V.
    Tracking Amplitude Resolver-to-Digital Converters
    5Bulgakov A., Emelianov S.
    Robotization of Building Panels Mounting
    6Bobyr M.V., Kulabukhov S.A., Milostnaya N.A.
    Fuzzy Control System of Robot Angular Attitude
    7Bobyr M.V., Yakushev A.S., Milostnaya N.A.
    Fuzzy algorithm of a mobile robot’s motion
    8Bagautdinov I., Bogdanov E., Zhilin S., Zhuravlev E.
    Vector form Description of Hydraulic Cylinders Interaction with Links of Actuating Unit
    9Kiryanov A.V., Kiryanov V.P.
    Improvement of Metrological Characteristics of the Laser Pattern Generators with Circular Scanning Mode by the Use of Hybride Angular Encoder
    10Ignatiev K.V., Kopichev M.M., Putov A.V.
    Autonomous Omni-Wheeled Mobile Robots
    11Pyatibratov G.Ya., Danshina A.A., Altunyan L.L.
    Methods of Efficient Parameters Multifactorial Determination of Industrial Manipulators Gears and Electric Drives
    12Omelchenko E.Ya., Enin S.S., Proskurin Ya.V.
    Servodrive Robotic Devices Load Limit
    13Krasinskaja Je.M., Ilyina A.N., Rukavishnikova A.S.
    On Modeling of the Dynamics of a Mobile Manipulator as a Mechatronic System
    15Lavrinov D.S., Khorkin A.I.
    Problems of Internal Calibration of Precision Laser Triangulation 2D Scanners
    16Kutlubaev I.M., Zhydenko I.G., Bogdanov A.A.
    Basic Concepts of Power Anthropomorphic Grippers Construction and Calculation
    17Kiselev V.V., Volodin V.D., Sharonov A.A.
    Application of Method of the Sliding Averaging for Truck Loader Crane Instalation Managemement System Handholds Position Sensors Indications Processing
    18Salah Reda Bdoor, Osama Ismail, Magdy Raouf Roman, Yehia Hendawi
    Design and Implementation of a Vision-based Control for a Ball and Plate System
    19Chernyshev A.D., Kulmukhametova A.S.
    Development Control for an Individual-Wheel-Drive Vehicle
    20Maklakov A.S., Demov M.A., Maklakova E.A., Gasiyarov V.R., Voronin S.S.
    EMC Research of 18-Pulse Circuit Consisting of 3LNPC Converters with SHE
    21Gasiyarov V.R., Maklakov A.S., Voronin S.S., Maklakova E.A.
    Simulation Modeling of the Rolling Mill Stand 5000 OJSC MMK
    22Voronin S.S., Maklakova E.A., Gasiyarov V.R., Maklakov A.S.
    Simple Hydraulic Drive Model of the Typical Industrial Mechatronic System
    Section 3.3. Electric power systems and renewable energy sources
    1Vavilov V., Aflyatonov R., Yakupov A.
    Usage of the Solar Radiation Potential in the Republic of Bashkortostan of Russian Federation
    2Vavilov V., Ismagilov F., Yakupov A.
    Multicoordinate Vibration Sensor for Cargo Condition Monitoring
    4Ismagilov F., Vavilov V., Yushkova O.
    Multicriteria Optimization of the High-Speed Magnetoelectric Generator on Hybrid Magnetic Bearings
    5Varganova A.V., Panova E.A., Patshin N.T.
    Overhead Lines Optimal Cross-Section Choice in the Task of Industrial Power Systems Engineering
    6Nikolaev A.A., Anokhin V.V., Lozhkin I.A.
    Estimation of Accuracy of Chosen SVC Power for Steel-making Arc Furnace
    7Pavlyuchenko D.A., Achitaev A.A., Shevtsov D.E.
    Controlled Switching for a Group of Induction Motors
    8Fedorov O.V.
    Assessment of Influence Parameters of Electric Equipment at a Size of Losses the Electric Power in Intra Factory Networks of Low Voltage
    9Gracheva E.I., Naumov O.V.
    Identification of Probability Characteristics of the Laws of Distribution Low-Voltage Devices Shop Networks
    10Gracheva E.I., Naumov O.V.
    Researches of Indicators Reliability and Probabilistic Characteristics of Elements Electric Equipment of Shop Electric Networks
    11Sheryazov S.K., Ptashkina-Girina O.S.
    Increasing Power Supply Efficiency by Using Renewable Sources
    12Махмудов Т.Ф.
    Исследование статической устойчивости Ангренской ТЭС применением функции Ляпунова в квадратичной форме
    13Vozmilov A.G., Ilimbetov R.Yu., Astafev D.V.
    Theoretical and Experimental Studies of the Effectiveness of an Electrostatic Air Cleaning Filter
    14Shempelev A., Iglin P.
    Development of Methods for Calculating the Aggressive Gas Content in Condensate at the Output from a Steam Turbine Condenser
    15Shuin V., Lebedev V., Filatova G.
    Study of Possibility of Digital Voltage Transformers Usage in Fault Location Determination
    16Vozmilov A.G., Ilimbetov R.Yu., Astafev D.V.
    The Usage of Ozone in Agriculture Technological Processes
    17Krasnykh A.A., Krivoshein I.L., Kozlov A.L.
    Single-phase Earth Fault Location in a Branched Distribution Network 6-35 kV of Overhead Lines
    18Skubienko S.V., Yanchenko I.V., Babushkin A.Yu.
    Using an Absorption Heat Pump in the Regeneration System of Turbine Model К-300-240-2 Manufactured by Kharkov Turbo Generator Plant (KhTGP)
    19Obukhov S.G., Plotnikov I.A., Sheryazov S.K.
    Methods of Effective Use of Solar Power System
    20Zasypkin A., Shchurov A.
    Centralize Ice Melting Controlled System
    21Andreev M.V., Sulaymanov A.O., Borovikov Yu.S.
    Universal Mathematical Model of Hydraulic and Steam Prime Movers
    22Novozhilov A.N., Akayev A.M., Novozhilov T.A.
    Currents in the Synchronous Condenser Windings at Turn-to-Turn Fault in the Rotor Winding
    23Sychev Yu.A., Belsky A.A.
    Methods of Compensation of Voltage Dips, Deviations and Distortions in Electrical Networks with Highly Variable Loads and Long Lines
    24Chumanov V.I., Chumanov I.V.
    Speed Control of Remelting in the Electroslag Process by Changing the Rotation Speed Consumable Electrode
    25Felix Byk, Myshkina L.
    Comparison and Choice of Measures to Improve the Reliability of Distribution Grid Companies
    26Breido Joseph, Kalinin A., Tomilova N.
    Field and Simulation Study of the Hydrodynamic Heater for Fluid Environments
    27Parshina G., Feshin B.
    The System for Designing Stope Face Power Supply and Coal Mine Electrical Services Staff Knowlegde Control
    28Sekretarev Yu.A., Panova Ya.V.
    Investigations of Possible Using a Generalized Fuzzy Interval for Analyzing Operating Conditions of Power Equipment at Hydropower Plants
    29Olhovskiy V.Ya., Myateg S.V., Myateg T.V.
    Analyzes of High Harmonics Generation and Power Losses of Low Power Consumers within 1000 V Networks
    30Kuznetsov K., Zakirova A.
    Harmonic Composition of the Rectified Current in Traction Substations when Using Different Rectifier Circuits
    31Andreev A.Y., Inahodova L.M., Kazantsev A.A.
    The Application of New Effective Ways to Reduce Losses of Electric Energy and Power in National Distributive Electric Networks
    32Krupenev D., Perzhabinsky S.
    Algorithm for Adequacy Discrete Optimization by Using Dual Estimates when Planning Development of Electric Power Systems
    33Gusev A., Suvorov A., Sulaymanov A.
    Measure of Reliability Tools for Simulating Electric Power Systems and Alternative Approach of Their Verification
    34Cheremisin V.T., ErbesV.V., Komyakov A.A.
    Evaluation of the Actual Effectiveness of Energy-Saving Devices based on Artificial Intelligence
    35Girshin S.S., Kuznetsov E.A., Petrova E.V.
    Application of Least Square Method for Heat Balance Equation Solving of Overhead Line Conductors in Case of Natural Convection
    36Novozhilov A., Issabekov Zh., Novozhilov T.
    Method to Protect Lines of Two Cables from Single Phase-to-earth Fault
    37Polishchuk V.I., Gnetova D.A.
    Diagnostics System Improvement of Turn-to-Turn Short Circuits of Synchronous Generator Rotor Winding
    38Klyuev R.V., Bosikov I.I.
    Research of Water-Power Parameters of Small Hydropower Plants in Conditions of Mountain Territories
    39Bartolomey P., Semenenko S.
    Accelerated Power Systems Power Flow Calculations Using Phasor Measurements
    40Mukhlynin N.D., Pazderin A.V.
    The Model of Distribution Grids State Estimation and Optimization based on the Energy Balances Equations
    41Sekretarev U.A., Mitrofanov S.V.
    Decision Support System for Hydro Unit Commitment
    42Minullin R.G., Kasimov V.A., Yarullin M.R.
    Multichannel Radar Control of Icing on Wires Overhead Transmission Lines
    43Minullin R.G., Kasimov V.A., Yarullin M.R.
    Comparison of Radar Equipment Readings and Weight Sensors Indications during Ice Deposits Detection on Overhead Transmission Lines
    44Malgin G.V., Veynblat A.V., Schekochikhin A.V.
    Improving Energy Efficiency of Power Supply System for a New Far Perspective Multiple-Well Platforms of Oil Field
    45Sekretarev Yu., Sultonov Sh., Nazarov M.
    Optimization of Long-Term Modes of Hydropower Plants of the Energy System of Tajikistan
    46Korzhov A.V., Korzhova M.E.
    A Method of Accounting for Fuzzy Operational Factors Influencing 6(10) kV Power Cable Insulation Longevity
    47Lukutin B.V., Shandarova E.B., Fuks I.L.
    Energy Efficiency of Photovoltaic Power Plants in Stand-Alone Power Supply Systems
    48Efanov D., Osadtchy G., Sedykh D.
    Development of Rail Roads Health Monitoring Technology Regarding Stressing of Contact-Wire Catenary System
    49Пряткина В.С., Белов А.А., Шафорост Д.А.
    Повышение эффективности использования твердого топлива на ТЭС
    50Kochneva E., Sukalo A.
    Computation of Calculated Measurements Values with Higher Accuracy Comparing to Measurements Themselves
    51Girshin S.S., Bigun A.Ya., Petrova E.V.
    Analysis of Dynamic Thermal Rating of Overhead Power Lines in the Conditions of Forced Convection Considering Non-linearity of Heat Transfer Processes
    52Mukhlynin N.D., Komlev Yu.M.
    Method of Direct Coordinatewise Discrete Optimization in Choosing the Optimal Normal Open Points in Distribution Grids
    53Goryunov V.N., Osipov D.S., Dolgikh N.N.
    The Application of Wavelet Transform for Identification of Single Phase to Earth Fault in Power System
    54Ufa R.A., Vasilev A.S., Suvorov A.A.
    Development of Hybrid Model of B2B HVDC
    56Fedosov E.M., Sattarov R.R., Volkova T.A.
    The Influence of Electrical Equipment Insulation Aging Degree on the Growth Rate of Partial Discharges Power
    57Ozhegov A.N., Derendyaeva L.V., Dubovtseva L.V. / Ожегов А.Н., Дерендяева Л.В., Дубовцева Л.В.
    Application of Diakoptics Method for Industrial Enterprise's Electrical Circuitry Decomposition by Communications Nodes in the Mode Calculation of Higher Harmonics
    Применение метода диакоптики для декомпозиции по узлам связи электрической схемы промышленных предприятий при расчете режима высших гармоник
    58Cherepanov V.V., Bakshaeva N.S., Suvorova I.A. / Черепанов В.В., Бакшаева Н.С., Суворова И.А.
    Economic Feasibility Study of the 20 kV Voltage Application at Industrial Enterprises
    Исследование экономической целесообразности применения напряжения 20 кВ на промышленных предприятиях
    59Basmanov V.G., Zakalata A.A., Kholmanskikh V.M. / Басманов В.Г., Закалата А.А., Холманских В.М.
    On the Issue of Periodicity of Non-Destructive Examination of Urban Electric Cable Lines
    К вопросу выбора периодичности неразрушающей диагностики кабельных линий городских электрических сетей
    60Sosnina E., Shalukho A., Lipuzhin I. / Соснина Е.Н., Шалухо А.В., Липужин И.А.
    Research of Isolated Electrical Systems Stability with Wind-Diesel Hybrid Power Stations
    Исследования устойчивости изолированных систем электроснабжения с ветро-дизельными электростанциями
    61Yudin A.V., Manin A.V., Yudin V.V.
    Power Leveling in the Parallel Work of Modular Energy Sources
    62Kryukov О.V., Serebryakov A.V. / Крюков О.В., Серебряков А.В.
    Active and Adaptive Algorithms of Autonomous Wind Power Plants Control and Monitoring
    Активно-адаптивные алгоритмы управления и мониторинга автономными ветроэнергетическими комплексами
    63Kostin A., Mezentsev P., Oboskalov V.
    Classical and Behavioral Decision Models using in the Context of Electrical Power Systems Development
    64Maksimov S., Trofimova S., Maksimova A. / Максимов С.П., Трофимова С.Н., Максимова А.Е.
    The Means of Losses Reduction and Electric Lines Operation Reliability Increase
    Пути снижения потерь и повышения надежности эксплуатации электрических сетей
    65Teregulov T.R., Sharifov B., Valeev A.R.
    Simplified Solar Panel Modeling in MATLAB/Simulink Considering Bashkortostan Republic (Russia) Environment Characteristics
    66Lizunov I.N., Misbakhov R.Sh., Bagautdinov I.Z.
    The Centralized System of Relay Protection and Automation for Substations of Medium Voltage
    67Карагодин В.В., Полянский К.А., Рыбаков
    Выбор оптимального варианта построения системы бесперебойного электроснабжения ответственных потребителей специальных объектов с заданным уровнем надежности
    68Shabanov V.A., AlekseevV.Y., YusupovR.Z.
    Adaptive Control of Transfer Switches and Synchronous Motors Self-Starting at Oil Pumping Stations
    69Sirotkin E.A., Martyanov A.S., Solomin E.V., Kozlov S.V.
    Emergency Braking System for the Wind Turbine
    70Lisitskiy K.E., Strumelyak A.V.
    Algorithms of Identifying Required Reduced Voltage Fluctuation Rate for Flicker Normalization
    71Obukhov S.G., Sarsikeyev Ye.Zh., Sholokhova I.I.
    Forecasting and Simulation of Electrical Loads in Decentralized Zones in Russia
    72Kuznetsov A.A., Buchelnikova O.S., Kuznetsova M.A.
    Test Standard Samples for Corrosion Concrete Supports by Spectral Analysis Methods
    73BulatovYu.N., Kryukov A.V.
    Optimization of Automatic Regulator Settings of the Distributed Generation Plants on the basis of Genetic Algorithm
    74Ershov A.M., Valeev G.S., Valeev R.G.
    Protection of Overhead Lines with Voltage of 380 V from the Single-Phase Short Circuits
    75Ryzhkova Y.N., Tsyruk S.A.
    Ferroresonance Suppression in Distribution Networks
    76Tsyruk S.A., Senchuk D.A., Kudrin B.I.
    On the Possibilities of Using Demand-Side Management Approach for the Power Market Control in Russian Federation
    77Eroshenko S.A., Samoylenko V.O., Pazderin A.V.
    Renewable Energy Sources for Perspective Industrial Clusters Development
    78Petrusev A.S., Rulevskiy V.M., Sarsikeyev Ye.Zh., Lyapunov D.Yu.
    Solar Tracker with Active Orientation
    79Klimova G.N., Leonova V.K.
    Siberian Federal District Balance of Electric Energy
    80Kirpichnikova I.M., Maliugina A.A.
    The Energy Efficiency of Photovoltaic Power Plants
    81Loskutov A., Loskutov A., Zyrin D., Vukolov V. / Лоскутов А.Б., Лоскутов А.А., Зырин Д.В., Вуколов В.Ю.
    Electric Power Distribution for the Cities and Elaboration of Method of Reducing Value of the Short-Circuit Current based on Algorithm of Dividing Network
    Анализ различных топологических структур распределения электрической энергии для городов и разработка методики борьбы с высокими значениями тока короткого замыкания на основе алгоритма деления сети
    82Gandzha S., Kiessh I.
    A Proposal of Doubly-Fed Alternator for Windmill Application
    83Gandzha S., Kiessh I.
    Optimal Designing of Brushless Axial Gap Electric Machines for Low Power Windmills
    84Osipov D.S., Plankov A.A., Rumyantseva E.V.
    Studies of Dynamic Stability of Nodes of Electric Power Systems with Asynchronous Loading Taking into Account Higher Harmonics
    85Martyanov A.S., Korobatov D.V., Sirotkin E.A.
    Modeling of Battery Charging Algorithms
    86Martyanov A.S., Korobatov D.V., Solomin E.V.
    Research of IGBT-Transistor in Pulse Switch
    87Korobeynikov S.M., Akramova M.S., Akramov B.K.
    Polygraph Registration of Brain Response to Magnetic Field of Power-line Frequency
    88Kireev P.S., Sarry S.V.
    Mathematical and Physical Modeling of Arc Transient Resistance for Relay Protection Operating Estimation
    89Ukraintsev A.V., Nagay I.V.
    "Virtual" Power Line Method to Correct the Calculation of Current Ground Faults in the Parallel Overhead Transmission Lines 110-220 kV
    90Lebedev V., Yablokov A.
    Examining Ferroresonance Phenomena in Circuits with Closed and Open Core Voltage Transformers
    91Khalyasmaa A.I., Sandakov Ya.V., Semerikov A.S.
    Power Equipment Technical State Assessment based on Structural Reliability Characteristics
    92Kozlov S.V., Sirotkin E.A., Solomin E.V.
    Wind Turbine Rotor Magnetic Levitation
    93Vainshtein R.A., Kolomiets N.V., Shestakova V.V.
    The Impact of Load, Comprising Asynchronous Motors, on the Negative-Sequence Currents in the Generator Circuit in Unbalanced Conditions
    94Lyapin A.I., Chichirov A.A., Chichirova N.D.
    Calculation of Physical and Chemical Processes in TPP - Open Heat Network as Displacement Reactor Model with Recycle
    95Dolinger S.Y., Lyutarevich A.G., Plankov A.A.
    Basic Approaches to Implementation of FACTS Devices Control System Taking into Account Electrical System Mode Optimization
    96Sedov A.V., Onyshko D.A., Lipkin S.M.
    Principle Of Defining The Compatible Cells For Battery Based On Clustering The Generalized Feature
    97Kulikov А.L., Obalin M.D., Vukolov V.U., Bezdushniy D.I.
    Adapting and Improving the Accuracy of Fault Location Algorithms on Power Transmission Lines on the basis of Statistical Simulation
    98Batulko D.V., Nikitin K.I., Bigun A.YA.
    Special Zero-Sequence Current Transformers to Determine Fault Connection in Medium Voltage Networks
    99Pashkovskiy S.N., Vainstein R.A., Yudin S.M.
    Transformation of Zero-Sequence Electric Quantities for Protection Against Line-to-Ground Fault in the Networks with Various Neutral Grounding Modes
    100Kubarkov Y., Makarov Ya.
    Application of Multi Agent in Solving Problems for Operation of a Smart Grid
    101Nagay I.V., Nagay V.I., Kireev P.S.
    Accounting for the Longitudinal Regimes of Asymmetry to Designing the Backup Protection of Power Distribution Qrid
    102Berezkin E.D., Nagay V.I., Sarry S.V.
    Evaluation Method of the Spatial Configuration of Induction Interference
    103Utegulov B.B.
    Development of Mathematical Models of Digital Protection Devices from a Single Phase Earth Faults in Networks with Voltage 6-10 kV
    104Tavarov S.Sh., Sidorov A.I., Medvedeva Yu.V.
    Servicing of the 500 kV Transmission Lines with the use of Calculate Cards of Intensity Distribution in Electric Field of Industrial Frequency
    105Iontseva O., Ancharova T.
    Expediency of Disaggregation of Workshop Transformer Substations
    106Zaytsev E.S.
    Development of Thermal Equivalent Circuits for Calculating the Temperature Transients of Underground HVCL With XLPE Insulation
    107Loktionov E.Y., Martirosyan A.A., Shcherbina M.D.
    Solar Powered Free-Piston Stirling – Linear Alternator Module for the Lunar Base
    108Oshchepkov V.A., Vladimirov L.V., Batulko D.V.
    The System of Determining the Faultconnection in the Distribution Network
    109Oshchepkov V.A., Gorunov V.N., Vladimirov L.V.
    Remote Control Determining the Location of Power Lines Damaged with Single Phase Ground Fault
    110Topolskiy D.V., Topolskiy N.D., Solomin E.V.
    Development of Algorithms of Interaction between Electronic Instrument Transformer and Substation Automation System
    111Kostin V.N., Belsky A.A.
    Wind and Diesel Paralleled Generators Characteristics of Operating Parameters
    112Titova G.R.
    The Evolution of Decision Making about Building Electrical Systems
    113Oboskalov V., Sergey G.
    Iterative Techniques for Assessment of Electrical Power System Structural Reliability
    114Nadtoka I., Vyalkova S.
    Short-Term Forecasting using Fuzzy Neural Network Accountability Air Temperature and Natural Lighting
    117Yanchenko S.
    Harmonic Phenomena of Typical Low-Distortion Residential Equipment
    118Goldstein W.G.
    Increasing the Efficiency and Speed of the Submodes Analysis of Short Circuits
    119Ruban N.Yu., Andreev M.V., Borovikov Yu.S.
    Software and Hardware Simulation Tools of Automatic Load-Frequency Control System
    120Huzmiev I.K., Chipirov Z.Ah.
    Energy Consumption Powered by Graphics Processing Units (GPU) in Response to the Number of Operating Computing Unit
    122Vukolov V., Trapeznikov I., Zyrin D., Loskutov A. / Вуколов В.Ю., Трапезников И.А., Зырин Д.В., Лоскутов А.А.
    Development of the Algorithm for Determining Locations Breaking the Electrical Network
    Определение мест размыкания распределительных электрических сетей в задаче повышения надежности электроснабжения потребителей
    123Kotov O., Kotova E.
    Reconstruction Variants Reliability Estimation of Industrial Area Power Supply System
    125Sumarokova L.P., Ershov V.A.
    Analysis and Evaluation of the Appropriateness of the Use of Cogeneration Biogas Plants
    126Dubrov V., Oganyan R., Shaykhutdinov D.
    To the Choice of the Principle Functioning Diagnostic System of Digital Substations
    127Shahmaev I.Z., Gaisin B.M., Shiryaev O.V.
    A New Method of Taking Management Decisions at Designing and Developing Electric Power Systems
    129Sosnina E., Asabin A., Kralin A., Bedretdinov R. / Соснина Е.Н., Асабин А.А., Кралин А.А., Бедретдинов Р.Ш.
    Research of Voltage and Power Solid-State Regulator in 6–20 kV Network
    Исследование твердотельного регулятора напряжения и мощности в сети 6-20 кВ
    130Iuldasheva A.I., Malafeev A.V.
    The Structural Reliability and Adequacy Assessment of the Industrial Electric Power Systems with Local Power Plants
    131Vyguzova M., Ilyin A., Kudriashova A.
    Development of the Mathematical Model of Vermicomposting Process
    132Bliznyuk D.I., Kovalenko P.Y., Berdin A.S.
    Defining the Instantaneous Power of Alternating Current During Electromechanical Transients
    133Ignatiev D., Fedyushin V., Gusev S.
    Security Analysis via the most Valuable Elements Revealing
    134Matveev D.A., Khrenov S.I., Zhuykov A.V.
    Research on the Performance of the Controlled Arc Suppression Reactors in 6–35 kV Electric Distribution Networks
    135Lupachev A., Sapelkin I., Smagin A.
    Interval Criterion of the Steady-State of the Transient in the Measuring Circuit
    136Gavrishev S.E., Pytalev I.A., Gaponova I.V.
    Alternate Sources of Energy Based on the Objects of Mining Enterprises
    Section 3.4. Power electronics, electrical machines and drives
    2 Shprekher D.M., Babokin G.I., Kolesnikov E.B. / Шпрехер Д.М., Бабокин Г.И., Колесников Е.Б.
    System of Neural Network Control and Prediction Technical Conditions Electromechanical Systems
    Система нейросетевого контроля и прогнозирования технических состояний электромеханических систем
    3 Solovev D.B., Merkusheva A.E.
    Study of Transients in Measuring Circuits for Negative Sequence Currents based on using Rogowski Coils
    4 Luk’yanov S.I., Vasil’ev A.E., Logunova O.S.
    Improvement of Electric Frive of Withdrawal and Straightening Unit in Continuous Casting Machine
    6 Borodin M.Yu., Borodin E.M., Metelkov V.P.
    Application of Integral Equations for Analysis of Electrodynamic and Thermal Processes in Electric Drive
    7 Dar’enkov A.B., Plekhov A.S., Titov D.Yu., Gordeev B.A.
    Parameters of Electromechanical Complex Mode at Its Foundation Vibration
    8 Dar’enkov A.B., Varygin I.A., Komrakov D.A.
    Analysis of Thermal Operating Conditions of a Bilateral Switch of a Three-Phase Matrix Frequency Converter
    9 Ahmed M. Omara, Sleptsov M.
    Direct Torque Controlled IPM SM Drive System with Bidirectional Interleaved DC/DC Converter for Electric Vehicle Application
    10 Lyutarevich A.G., Dolinger S.Y, Plankov A.A.
    Development of Permanent Magnet Motor Calculation Technique
    11 Ivanov A.S., Nusratov P.R., Timofeev A.S., Gromova O.V.
    Energy-Efficient Drive System for Lift-and-Carry Transfer Mechanisms
    12 Malygin I.V., Plastun A.T.
    Synchronous Motor with Ring Windings Electromagnetic Torque Calculation Alhorithm with ANSYS Package Usage
    13 Lysenko O.A.
    The Study of Dynamic Characteristics of an Electric Drive of Centrifugal Pump with Taking into Account Tooth Harmonics of Induction Motor
    14 Tatevosyan A.A., Tatevosyan A.S., Zaharova N.N.
    The Study and Calculation of Magnetic Field of the DC Electromagnet with the Split Poles and Polar Tips
    15 Batseva N. L., Shuvalov A.Yur.
    The Second Order Polynomial Load Model Impact on Stability of the Synchronous Motor
    16 Kozjaruk E.A., Vasilev Y.B.
    Research Methods of Increase Efficiency Algorithms Pulse Width Modulation for Semicondactor Inverter
    18 Zezyulkin G., Gordilovskiy A.
    Development Algorithms of Optimal Stationary Impulse Models of Multiphase Multi-Bridge Key Transducers
    19 Tsvetkov A.N., Safin A.R., Gibadullin R.R.
    Hardware-Software System Test Bench for Studies of a Reciprocating Electrical Machine
    20 Sattarov R.R., Ismagilov F.R, Babikova N.L.
    Electromagnetic Restoring Forces in Low Energy Electromechanical Vibration Generators
    21 Dementyev Yu., Bolsynov M., Kojain N.
    Self-controlled Drive According to the Hypersynchronous Converter Cascade Circuit
    22 Burkov A.F.
    Research and Development of Structural Diagram of Ship's Electric Drives
    24 Lobov B., Mikitinskiy A., Kolpachshan P. / Лобов Б.Н., Микитинский А.П., Колпахчьян П.Г.
    The Control of Dosing Pumps by Modern Electric Drive
    Применение современного электропривода для управления насосами-дозаторами
    25 Volkova T.A., Aletdinov R.F., Papernyuk V.A.
    Research of Mixing Dielectric Liquids under the Electric Field Influence
    26 Pugachev A.
    Induction Motor Temperature Influence on Scalar Control Systems Efficiency
    27 Samoylenko V.O., Pazderin A.V.
    Semiconductor Power Electronics for Synchronous Distributed Generation
    29 Dementyev Yu.N., Umurzakova A.D.
    The Indirect Methods of Control the Output Coordinates for the Three-Phase Asynchronous Electric Motor
    30 Pugachev A.
    Simulation of Induction Motor Temperature Determination by Additional Voltage Injections
    31 Vasukov I.V., Bolshenko A.V., Pavlenko A.V.
    Output Filter Designing for Power Supplies Considering Leakage Inductance
    32 Pavlenko A.V., Bolshenko I.A., Bolshenko A.V.
    The Algorithms of Designing of the Internal Combustion Engine Electromagnetic Gas Exchange Valve Actuator with Specified Dynamic Parameters
    33 Smolin V.I., Topolskaya I.G., Volovich G.I.
    The Energy Method for Monitoring the Instantaneous State and the Formation of a Synchronous Motor Control Variables
    34 Pyatibratov G.Ya., Kravchenko O.A., Kivo A.M.
    Design Principles and Implementation of Advanced Simulators for Training Astronauts to Work in Zero or Low Gravity Conditions
    35 Gandzha S.
    Proposals for the Design of High-Speed Electric Machines
    36 Plotnikov Iu., Braslavsky I., Ishmatov Z.
    Comparative Analysis of the Supercapacitors Wiring Diagrams in Frequency-Controlled Electric Drives
    37 Ptakh G.K., Zvezdunov D.A., Mustafaev R.R.
    Selection of Stator Yoke Height of Traction Switched Reluctance Motor
    38 Belousov E.V., Sychev D.A., Zhuravlev A.M.
    Optimization of Function Control Action for the Electric Drive with Field Regulated Reluctance Machine
    39 Grigoryev M.A., Shishkov A.N., Savosteenko N.V.
    Power Circuit Schemes in AC Drive is Made by Condition of the Minimum Electric Losses
    40 Korzhavin M.E., Savosteenko N.V., Khayatov E.S.
    Pulse Vector Control for Transport Applications
    41 Andriyanov A.I., Sachenko E.A.
    Mathematical Model of a Three-Phase Transistor Controlled Rectifier with a PI Voltage Controller in Regeneration Mode
    42 Zyuzev A.M., Stepanyuk D.P., Bubnov M.V.
    Application of Passive Power Filter with Induction Motor Soft Starter
    43 Koptjaev E., Balashevich V., Abramov S.
    Power Rectifier for Direct Current Link
    44 Grachev P.Yu., Gorbachev E.E., Tabachinskiy A.S.
    Power Converters with Compact Winding SCIGs for HEVs, Micro Hydroelectric Power Stations and Wind Turbines
    45 Zyuzev A.M., Bubnov M.V., Mudrov M.V. / Зюзев А.М., Бубнов М.В., Мудров М.В.
    Sucker-Rod Pump Unit Electric Drive Simulator
    Симулятор электропривода штанговой глубинной насосной установки
    46 Nesterov K.E., Mudrov M.V., Zelentsov V.I.
    Simulator of the Shunting Locomotive’s Electric Drive
    47 Bolshunova O., Kamyshian A., Bolshunov A.
    Diagnostics of Electric Motors Technical Condition using Wavelet Analysis
    48 Shonin O.B., Novozhilov N.G., Kryltsov S.B.
    Sensorless Estimation of the Rotor Speed for the Use in V/f Control Systems of IM Drives
    49 Isaev A.V., Nefed’ev A.I.
    Mechatronics Conversion System: A Conceptual Energy Model
    50 Isaev A.V., Nefed’ev A.I.
    Automated Water Supply System based on a Series Excited Electric Motor
    51 Kodkin V.L., Anikin A.S., Shmarin Y.A.
    Dynamic Load Disturbance Correction for Alternative Current Electric Drives
    52 Chernoskutov D.
    Research of High Current Interruption Process in SF6 Gas Insulated Disconnecting Switch
    53 Romanov A.M., Slaschev B.V., Volkova M.A.
    A Comparison of Hardware Implementations of FOC Controllers for Asynchronous Motor Drive Based on FPGA
    54 Chernoskutov D.
    Computer Measuring Technology of Electric Field Strength and Breakdown Calculation Methodic for SF6 Circuit Breaker
    55 Burkov A.F., Verevkin V.F.
    The Analysis of the Experience of Technical Operation of Ship Electric Drives
    56 Bubnov A.V., Emashov V.A., Chudinov A.N.
    Angular Velocity Indirect Determination Device Structure for the Synchrophase Electric Drive
    57 Bochkarev I.V., Khramshin R.R.
    Device for monitoring permanent magnet friction brakes
    58 Karandaev A.S., Khramshin V.R., Khramshin R.R., Barankova I.I.
    Conceptual area of development of power saving thyristor electric drives of rolling mills
    59 Evdokimov S.A., Kondrashova Yu.N., Karandaeva O.I., Gallyamova M.S.
    Stationary system for monitoring technical state of power transformer
    60 Khramshin V.R., Radionov A.A., Kornilov G.P., Odintsov K.E.
    Improvement of electric and mechanical system for automated strip tension control at continuous wide-strip hot-rolling mill
    61 Karandaev A.S., Yachikov I.M., Khramshin V.R.
    Methods of multi-parameter diagnostics of electric equipment condition within on-line monitoring systems
    62 Braslavsky I.Ya., Esaulkova D.V., Metelkov V.P., Kostylev A.V.
    On Universal Thermodynamic Models for the TEFC Induction Motors
    63 Maklakova E.A., Gasiyarova O.A., Voronin S.S., Gasiyarov V.R.
    Experimental Determination of Resultant Roll Force at Hot Plate Mill 5000
    Section 3.5. Signal processing and real time embedded control
    1 Volobuev S.V., Ryabtsev V.G., Utkina T.Yu. / Волобуев С.В., Рябцев В.Г., Уткина Т.Ю
    Automatic Recovery of Memory Operability in Microprocessor Based Control System
    Автоматическое восстановление работоспособности модулей памяти в микропроцессорных системах управления
    2 Gordeev B.A., Okhulkov S.N., Zlobin P.A., Plekhov A.S.
    Extreme Values Revelation of Magnetorheological Transformers Dynamic Rigidity of Hydromounts
    3 Gordeev B.A., Okhulkov S.N., Ermolayev А.I., Titov D.Yu.
    Determining the Managing Signals Optimum Phase in Magnetorheological Transformers of Hydromounts
    4 Lysyannikov A.V., Kondrashov P.M.
    Automatization of Constant Determination in Rheological Models of Experimental Data
    5 Khmara V.V., Lobotskiy Yu.G. and Kabyshev A.M.
    Microprocessor Control of Devices Systems of Pneumatic Container Delivery for the Analysis of Samples of Concentrating and Metallurgical Production
    6 Sokolov R.I., Abdullin R.R., Dolmatov D.A.
    Development of Synchronization System for Signal Reception and Recovery from USB-Keyboard Compromising Emanations
    7 Sokolov R.I.
    Theoretical Investigation of Gaussian and non Gaussian Noise Masking Properties
    8 Abdullin R.R.
    Comparative Analysis of Video Signal Filtering Quality by Various Nonlinear Methods in Nonstationary Mode
    9 Putov A.V., Ignatev K.V., Kopichev M.M.
    Infrared Camera Based Robot Position Determening and Control System
    10 Lachin V.I., Solomentsev K.Y, Demidov O.Y.
    Microprocessor Instrumentation and Control Systems for Power Generating Objects’ Parameters
    11 En Un Chye, Levenets A.V.
    A Simple Method for Estimating the Frequency of the Periodic Component of a Measuring Signal
    12 En Un Chye, Bogachev I.V., Levenets A.V.
    Selection Criteria of the Compression Algorithm in Information-Measuring System
    13 Kovalev O.F., Yanchenko I.P.
    Hardware Solution for Haar Wavelet Transform in Real Time
    14 Yurenko K., Fandeev E.
    Structure and Functions of On-Board Autodriver System of Train
    15 Fayzrakhmanov R.A., Bakunov R.R.
    The Reduction of Learning Sample in Information-Measuring and Control Systems based on Brain-Computer Interface Technology
    16 Ismagilov I.I., Khasanova S.F.
    Algorithms of Quasi Evaluation of Polynomial Trend of the Digital Signals based on Oblique Discrete Walsh Transformations
    17 Kovalenko P.Y., Bliznyuk D.I., Berdin A.S.
    Improved Extrema Detection Algorithm for the Generalized Empirical Mode Decomposition
    18 Kazimirov A.N., Telezhkin V.F.
    Research of Methods of Transformation of Chaotic Signals in Radio Engineering Systems
    19 Pagozin A.N., Telezhkin V.F.
    Processing of Signals as the Sum of the Determined Function and Realization of Stationary Casual Process
    Section 3.6. Modeling and computer technologies
    1 Круглова Т.Н., Работалов Н.Н., Мельников М.А.
    Применение аппарата нечеткой логики для вибрационной диагностики электрооборудования
    2 Shaposhnikov Yu.A., Tyunin A.V.
    Modeling Technique for Gas Duct Cavity of Heat Engine
    3 Rulevskiy V.М., Pravikova A.A., Lyapunov D.Yu.
    Autonomous Inverters' PWM Methods for Remotely Controlled Unmanned Underwater Vehicles
    4 Kruglova T.N.
    Wavelet Analysis for Fault Diagnosis of Electrical Machines Using Current Signals
    5 Daher Sayfeddine, Bulgakow A.
    Unconventional Evaluation of Micro-UAV Stability Problem using Water Drop Representation
    6 Mokeyev V.V.
    On Application of Generalized Jacobi Method in Face Recognition by Linear Discriminant Analysis and Principal Component Analysis
    7 Sukhovilov B.M., Sartasov E.M., Grigorova E.A. / Суховилов Б.М., Сартасов Е.М., Григорова Е.А.
    Improving the Accuracy of Determining the Position of the Code Marks in the Problems of Constructing Three-Dimensional Models of Objects
    Повышение точности определения положения кодовых марок в задачах построения трехмерных моделей объектов
    8 Dementyev Yu.N., Kritsky A.B. / Дементьев Ю.Н., Крицкий А.Б.
    The Advanced Automated Hardware-Software Complex of Control and Management of Functioning of the Megapolises Complicated Heat-Supplying Systems
    Усовершенствованный автоматизированный программно-аппаратный комплекс контроля и управления функционированием сложных теплоснабжающих систем мегаполисов
    9 Korolkova L., Mashrabov N. / Королькова Л.И., Машрабов Н.
    Limits for GI/GI/N Queues
    Предельные показатели многолинейной системы массового обслуживания
    10 Herreinstein A.V., Herreinstein E.A., Mashrabov N.
    Method of Temperature Field Computation under Variable Thermophysical Material Properties
    11 Morozova A.
    Model of Quality Metering Determination and Comparison of Arbitrary Nature Objects Based on Their Bisubjective Estimation
    12 Tatarinova N.V., Suvorov D.M.
    Development of Adequate Computational Mathematical Models of Cogeneration Steam Turbines for Solving Problems of Optimization of Operating Modes of CHP Plants
    13 Zubkov E.V.
    Computer Modeling of the Automated Tests of Diesel Engines Various Conditions of Their Operation
    14 Sagdatullin M.K.
    The Mathematical Model for Finite Element Calculation of Thin-Walled Structures
    15 Gavrikov M., Sinetsky R., Knyazev D.
    Technology and Software of System of the Metrological Analysis of Cellular Cylindrical Surfaces of Large-Size Products
    16 Tsurikov A.N., Guda A.N.
    Method, Algorithm and Device for Training of Artificial Neural Network: Theoretical Foundations and Practical Realization
    17 Brodov Yu., Plotnikov P., Nevolin A.
    Influence of Ground Air Mass Motion on Operation of Air-cooled Oil Coolers of Gas-turbine Units
    18 Tikhonova O., Malygin I., Plastun A. / Тихонова О.В., Малыгин И.В., Пластун А.Т.
    The Modeling and the Calculation of the Subexciter with Permanent Magnets by Dint of “ANSYS Maxwell”
    Моделирование и расчет подвозбудителя с постоянными магнитами в среде “ANSYS Maxwell”
    19 Kramar V.
    Construction of Equivalent Matrix Model of Multivaruable Multi-Stage Control System
    20 Shleymovich M.P., Medvedev M.V., Lyasheva S.A. / Шлеймович М.П., Медведев М.В., Ляшева С.А.
    Object Detection in the Images in Industrial Process Control Systems based on Salient Points of Wavelet Transform Analysis
    Детектирование объектов на изображениях в системах управления технологическим процессом на основе анализа особых точек вейвлет-преобразования
    21 Lapin A.P., Kuznetsova K.V.
    Modification Features of the Measurement Equation for Vortex Sonic Flowmeters
    22 Anikin I.V., Khaled Alnajjar.
    Efficient Pseudo-random Number Generator Based on Fuzzy Logic
    23 Mikhaylov A.A., Bazuyeva S.A.
    The Structural-Parametrical Integration of Modules for Software Algorithms. Part I
    24 Mikhaylov A.A., Bazuyeva S.A.
    The Structural-Parametrical Integration of Modules for Software Algorithms. Part II
    25 Kolesnikov A., Kostyukov A., Maslova M.
    Mathematical Model of Multi-Section Screw Extruder Manufacturing Polymer Products
    26 Ruchay A.
    A New Predicting Method based on Estimate of Holder Exponent by Continuous Wavelet Transform
    27 Канюков С.И., Коновалов А.В., Муйземнек О.Ю.
    Применение теории нечетких множеств для выбора решений в САПР технологических процессов ковки
    28 Канюков С.И., Коновалов А.В., Муйземнек О.Ю.
    Подход к разработке концепции онтологии проектирования переходов ковки на прессах
    29 Anikin I.V., Makhmutova A.Z., Gadelshin O.E.
    Symmetric Encryption with Key Distribution Based on Neural Networks
    30 Bogatenkov S.A., Malovechko S.N. and Kosterin V.V.
    Secure State Power System Models Building
    31 Potapov L.A., Fedyaeva G.A., Smorudova T.V.
    Modeling Electromagnetic Processes in Electromagnetic Brakes and Slip Clutches with Hollow Ferromagnetic Rotors
    32 Khristodulo O., Gvozdev V., Davletbakova Z.
    Spatial Information Processing for Decision-making Support of Siting Sources of Technogenic Hazards Using Computer Technologies
    33 Tomilova N., Kalinin A., Tomilov A.
    Automated Control System for Operational and Perspective Modes of Heat Supplying Systems of Megalopolises
    34 Gvozdev V.E., Khristodulo O.I., Blinova D.V.
    Information Support of Technogenic Safety Management on the Basis of Mathematical Modeling and GIS Technologies
    35 Rizaev I., Takhavova E. / Ризаев И.С., Тахавова Э.Г.
    Statistical Methods of Making Decision on Repair of Technical Means
    Принятие решения по ремонту технических средств на основе статистических методов
    36 Ivanov V.P., Morozova A., Shkaberin V.A.
    Method of Synthesis of Special Control for Autonomous Systems
    37 Zhirabok A., Zuev A., Pavlov S., Shumsky A., Solyanik S.
    Fault Diagnosis in Linear Systems with Non-Parametric Method
    38 Doronina J.V., Dymchenko I.V., Syrykh O.А.
    Methods of Structural Synthesis of Geographic Information System Configuration Variants for Archaeological Activity
    39 Katasev A.S., Kataseva D.V.
    Expert Diagnostic System of Water Pipe Gusts in Reservoir Pressure Maintenance Processes
    40 Katasev A.S., Emaletdinova L.Yu., Kataseva D.V.
    Neuro-Fuzzy Model of Complex Objects Approximation with Discrete Output
    41 Syranov D.V., Kovalnogov V.N., Zolotov A.N.
    Modeling, Research and Optimization of Heat Losses During Transport in Energy Systems
    42 Korniliev M.G., Kovalnogov V.N., Zolotov A.N.
    Modeling and Analysis of the Efficiency of the Convective Drying of Capillary-Porous Bodies with Ultrasound
    43 Sinyavskaya E.D., Shestova E.A.
    Assessment Adequacy and Updating of the Fuzzy Control Models Parameters of the Production Facilities
    44 Melyukov V.V., Repkin D.A., Zapol'skikh S.N.
    Optimum Control Problem of the Hybrid Welding Process
    45 Dulesov A.S., Khrustalev V.I., Dulesova N.V.
    Quantification of Information in the Closed Structure of a Technical System
    46 Mokhov V.A., Grinchenkov D.V., Spiridonova I.A.
    Research of Binary Bat Algorithm on Example of the Discrete Optimization Task
    47 Kulikov D.S., Mokeyev V.V.
    On Application of Principal Component Analysis and Linear Discriminant Analysis to Control Driver’s Behavior
    48 Bakhvalov Yu.A., Yufanova A.L., Grechikhin V.V. / Бахвалов Ю.А., Гречихин В.В., Юфанова А.Л.
    Synthesis of Optimal Electromagnetic Actuators on Basis of Solving Inverse Problems
    Синтез оптимальных электромагнитных приводов на основе решения обратных задач
    49 Zakharov V.M., Eminov B.F., Shalagin S.V.
    Representation of Markov’s Chains Functions over Finite Field based on Stochastic Matrix Lumpability
    51 Meshkov Е.I., Gerasimenko T.E.
    Modelling of Сonvective Heat Transfer in the Rotary-Drum Furnace
    52 Nikolaev Yu.N.
    Aspects of Assessment of Organizational and Technical Reliability and Design of Construction Processes with Target Reliability Level using Computer-Aided Technologies
    53 Nikolaev Yu.N.
    The Algorithm of Automated Formation of Planning and Technical Solutions of Construction Operations on Variant Basis
    54 Klyuev R.V., Bosikov I.I.
    Mathematical Models and Methods Development for Organization and Technological Decision Making to Ensure a Higher Efficiency of Nature-Industry System Operation
    55 Samsonova N.V., Shevtchenko O.Y.
    The Algorithm for Creating Geospatial Database to Ensure the Effective Functioning of the Gas Distribution Network
    56 Volman M.A., Semenov V.K.
    System of Training Programs for Simulation of Reactor Measurements
    57 Solovev D.B., Severin S.D.
    Study of Transient Current Measurement Using Micro-CAP Circuit Simulator
    58 Getmanskiy V.V., Nasonov A.A., Novokshcenov A.A.
    Coupled Model of Hydraulic Circuit System and Multibody Dynamics System of Vehicle
    59 Makarovskikh T.
    A-trails and their Application to Industrial Process
    60 Puzin V.S., Sokolov A.A., Sokolova E.A.
    Set-Theoretic Methods For Control And Automation Of Image Processing
    61 Plotnikova L.V., Kashipova L.A.
    Development of Software for Analysis of the Structure of Industrial Heat and Power Systems
    62 Matrenin P.V., Manusov V.Z.
    The Cyclic Job-Shop Scheduling Problem. The New Subclass of the Job-Shop Problem and Applying the Simulated Annealing to Solve It
    63 Sukhinets Zh.A., Gulin A.I.
    Modeling of Converters and Devices with Distributed RC-parameters with the Required Accuracy in the Specified Frequency Range
    65 Serdobintsev Yu.P., Ivanyuk A.K.
    Analyzing the Stress-Strain State of Object Bodies Subjected to Hydrostatic Pressure using Modern CAD Systems
    66 Терехин А.А., Пашнина Н.А.
    Оценка влияния количества лучей ультразвуковых преобразователей расхода на характеристики качества измерений
    67 Sukhorukov S.I., Soloviev V.A., Cherniy S.P.
    The Question of Evaluation of Limiting Characteristics of De-icing the Power Line Wires
    68 Khashimov A.B.
    Mathematical Modeling of Complex Antenna System
    69 Yaresko S.I., Balakirov S.N., Yaresko S.I., Balakirov S.N., Goryainov D.S.
    Modelling of the Process of Laser Treatment the Tip of the Tool Cutting Wedge and Its Feature
    70 Vasileva O.V., Budko A.A., Lavrinovich A.V.
    Simulation Approach for Optimization Processes in the Magnetoplasma Accelerator
    71 Efanov D., Sapozhnikov V., Sapozhnikov V.
    On Variety of Sum Codes with On-Data Bits and One Weighted Data Bit in Concurrent Error Detection Systems
    72 Agliullin I.N., Talyzin V.A., Yu.I. Choni.
    Minimax Approximation of a Complex-Valued Function Modulus by Means of Linear Programming
    74 Kuzmin V.A., Maratkanova E.I., Zagray I.A.
    Modeling of Thermal Radiation of Heterogeneous Combustion Products in the Model Solid Rocket Engine Plume
    75 Korotkiy V.A., Usmanova E.A., Khmarova L.I.
    Dinamic Connection of Second-Order Curves
    76 Igizianova N.A., Potapov V.I.
    Mathematical Modeling Methods in the Studying of Physical Processes in the Currentcarrying Nonmetallic Melts
    77 Khovanskova V., Khovanskov S., Rumyantsev K.
    Using Multiagent System for Solving Tracing Problems
    78 Talyzin V.A., Agliullin I.N., Kushnirenko V.N.
    Model of Interdependent Equation with Restriction on Structural Parameters
    79 Petrov Yu.S., Sokolov A.A.
    Increase of Effective Management of Technological Processes of the Mountain Enterprise on the basis of the Analysis of Information on Technogenic Cycles
    80 Raikhlin V.A., Vershinin I.S., Gibadullinn R.F.
    Reliable Recognition of Masked Geospatial Scenes During Transmission over the Network
    81 Saidaliev Sh.S., Valeev R.G.
    The Simulation of Neutralling System in Matlab/Simulink Environment for Research Conditions Electrical Safety
    82 Abdulloev R.T., Tryapitsyn A.B., Khanzhina O.A.
    The Electrochimical Сorrosion Processes Simulating of Grounding Devices
    83 Gumerov A.Z., Nasibullin R.T., Sarimov L.R.
    Modeling of the Starter-Generator Device for Truck KAMAZ
    85 Lozbinev F.Y., Gamov А.А., Spasennikov V.V.
    Modeling of Element Reliability of a Corporate Telecommunications Network in the Territory of the Russian Federation
    86 Ritov M.Y., Gorlov A.P., Eryomenko V.T.
    Mathematical Modeling of the Assessing Process the of Security Level of the Complex Organizational and Technical Systems of Industrial Enterprises
    88 Kudoyarova V.M., Pavlov V.P.
    The Spline Method for the Solution of the Transient Heat Conduction Problem with Nonlinear Initial and Boundary Conditions for a Plate
    89 Antyasov I.S., Sokolov A.N.
    Investigation Limits of Applicability of the Method Nicolson-Ross-Weir to Calculate the Permittivity and Permeability Radar Absorbing Material
    90 Томаев М.Х.
    Выбор оптимальной стратегии макрозамен в циклящихся программных алгоритмах, реализованных на языке "С++"
    91Groppen V.O.
    Experimental Verification of Deployed Capacitors as a New Type Engines
    92Prokudina L.A.
    Mathematical Modeling of Unstable Flow Modes of Thin Layers of a Viscous Fluid in the Heat-mass- transfer Devices
    93 Muravieva O.V., Petrov K.V., Myshkin Yu.V.
    Modeling Interactions between the Magnetic and Eddy Current Fields of the Electromagnetic-Acoustic Transducer
    95 Khatagov A.Ch., Kryzhanovskaya I.V., Zhelokov I.E.
    Computer Sketch Designing of O-type Microwave Device Collector
    96 Grinchenkov D.V., Kushchiy D.N., Kolomiets A.V.
    One Approach to the Solution of Subject Search Problem of Electronic Educational Resources on the Internet
    97 Чистякова Т.Б., Аразтаганова А.М.
    Компьютерная система моделирования для управления процессами получения многоассортиметных термоусадочных полимерных пленок
    98 Akhmedzyanov D.A., Kishalov A.E., Markina K.V.
    Сomputer-Aided Engineering Design of Main Aviation GTE Units
    99 Klochkova N., Obukhova A., Protsenko A.
    Simulation of Special Purpose Induction Installation by Means of Flux Software Package
    100 Knyazev S.Yu., Shcherbakova E.E. / Князев С.Ю., Щербакова Е.Е.
    The Numerical Problem Solving on Eigenvalues and Eigenfunctions for the Helmholtz Equation
    Численное решение задач на собственные значения и собственные функции для уравнения Гельмгольца
    101 Knyazev S. Yu., Shcherbakova E.E., Shcherbakov A.A. / Князев С.Ю., Щербакова Е.Е., Щербаков А.А.
    Simulation of Melting Ice on Overhead Power Line Wires by the Point Sources Method
    Моделирование плавки гололеда на проводах воздушных линий электропередач с помощью метода точечных источников поля
    102 Gadasina L.V., Sedov M.S., Kuranova O.N.
    Building an Automatic Analysis System of Tests Results within the Analytical Unit of the E-Learning System of the Mass Trade Workers in JSC 'Russian Railways'
    103 Ulanov Al.M., Ivanov M.A.
    Analysis of Possibility Modeling of the Multiarc Welding in ESI SYSWELD
    104 Gorshkov K.
    The Simulation Technique for Large-Scale Tree Structured Interconnects
    105 Horev A.A., Bykov A.I., Sokolov A.N.
    Design and Research of Characteristics of the Analog Acoustic Noise Generator
    106 Letavin D.A., Sychugov S.G., Korotkov A.N., Chechetkin V.A.
    Automated Generating of the Reflectarray Layout
    107 Lvovich I.Ya., Preobrazhensky A.P., Nechaeva A.I.
    The Use of Intellectual Technologies for Construction of Models of Objects with Necessary Average Values Scattering Characteristics
    108 Menshikh V.V., Pyankov O.V.
    Development of Mathematical Model Relationship of Internal Estimates Information-Analytical System with Key Indicators
    109 Burtseva О.А., Tkachev А.N., Abuladze N.R. / Бурцева О. А., Ткачев А.Н., Абуладзе Н.Р
    Methods for Research of Nonconservative Systems States
    Методы исследования состояний неконсервативных систем
    110 Filaretov V., Kurganov S., Gorshkov K.
    Generalized Parameter Extraction Method for Analog Circuit Fault Diagnosis
    111 Abaev Z.K., Galachieva S.V.
    Mathematical Model Elaboration in Terms of Baking Time Influence on the Resistance to Stress Corrosion Cracking under Tension
    112 Krasinskiy A.Ya., Ilyina A.N.
    About the New Results in Modeling of the Ball and Beam System Dynamic
    113 Chistyakova T.B., Teterin M.A., Razygrayev A.S.
    Computer System of Big Data Analysis for Polymeric Films Quality Management
    114 Tyrsin A.N., Surina A.A., Kuklin A.A.
    Modeling of Risk in Multidimensional Stochastic Systems
    115 Tynchenko V.S., Petrovsky E.A., Tynchenko V.V.
    The Parallel Genetic Algorithm for Construction of Technological Objects Neural Network Models
    116 Tynchenko V.V., Solovyov E.A., Tynchenko S.V.
    Design of Grid Systems to Solve Complex Industrial Engineering Problems
    117 Berestova S.A., Misyura N.E., Mityushov E.A., Shtang T.V.
    Smooth Conjugation of Two Intersecting Planes Arbitrarily Oriented in Space
    118 Shvartsburg L.E., Butrimova E.V., Yagolnitser O.V.
    Automation of Management of Ecological Parameters of the Technological Processes of Cutting on the basis of Forecasting Their Negative Impact on the Person and Environment
    119 Mayatskaya I.A.
    Application of Mathematical Methods in Recognition of Plant Objects
    121 Khoroshev A.S., Puzin V.S., .Schuchkin D.A.
    About the Possibility and Efficiency of Austenitic Steel Rope Condition Magnetic Control
    122 Sheludko A.S., Shiryaev V.I.
    Guaranteed State and Parameter Estimation for One-Dimensional Chaotic System
    123 Korobkin D.M., Fomenkov S.A., Kolesnikov S.G.
    A Function-Based Patent Analysis for Support of Technical Solutions Synthesis
    124 Кацай Д.А., Исупова Т.Д., Бирюков А.Д.
    Система бесконтактного управления управления антропоморфным роботом
    125 Бекин А.Б., Богданов Д.Ю, Шмат Р.А.
    Анализ переменных упруго-диссипативных свойств систем перемещения объектов с гибкими механическими передачами
    126 Galiullin L.A.
    Development of Automated Test System for Diesel Engines Based on Fuzzy Logic
    127 Nikitin M.N.
    Modeling of Natural Convection
    128 Dobaev A.Z., Maslakov M.P., Dedegkaeva A.A.
    Development of Decision Support System for Data Analysis of Electric Power Systems
    129 Postovalova I.P., Sharonova V.B.
    Algorithms of Optimizing a Network Model
    130 Iliukhin A.N., Gibadullin R.A.
    Improvement of “Winner Takes All” Neural Network Training for The Purpose of Diesel Engine Fault Clustering
    131 Bogachev V.A., Chernov A.V., Bogachev T.V.
    A Novel Concepts for the Study of Fuzzy Sets Similarity and their Applications to Incident Awareness in Intelligent Transportation Systems
    132 Simenko E.V., Muratbakeev E.Kh., Zvonarev I.E.
    Analytical and PC-graph Models of Ruled Surfaces
    133 Shcherbinina N.I., Kobak V.G.
    Using a Generational Strategy for Solving Homogeneous Minimax Problem of the Island Model
    134 Grigа A.D., Ivanitsky M.S.
    Modeling the Dispersion of the Benzpyrene Emissions from Heat-Generating Installations in the Urban Environment
    137 Dumchev V.A., Voytovich N.I., Mitelman Yu.E., Malov E.E.
    Simulation of the Dielectric Support Influence to the Cavity Antenna Performance
    138 Fedyaeva G.A., Smorodova T.V., Kovalev R.V.
    Electromechanical System of the Asynchronous Electric Drive of Movement of a Bridge Crane Modeling
    139 Даурова А.А.
    Решение многокритериальной задачи поиска оптимального режима функционирования антивирусных программ
    140 Shulev I., Safonov E.
    The use of Numerical Simulation Methods in the Development of Vortex Flowmeters
    141 Sinkov A., Asyaev G., Mursalimov A., Nikolskays K.
    Neural Networks in Data Mining
    142 Зиновьев П.А.
    Моделирование “дрейфа” нечётких границ области функциональной живучести корпоративной информационной системы
    143 Косых Н.Э., Савин С.З., Столярчук А.С.
    Разработка роботизизированного дозаторного устройства для задач химиотерапии
    144 Bannikov I.A., Ilinykh A.B., Mitelman Y.E., Borisov V.I.
    Modelling and Analysis of Bow-Tie Antenna Properties for the Brain Microwave Radiometry
    145 Litvyak R.K., Vorobyev S.P., Katsupeev A.A.
    The Statement and Features of Phase Space of Reliability Research Problem of High Availability Information System Based on Architecture with Servers Redundancy
    146 Petrovsky Ed., Bukhtoyarov V., Savitskaya S.
    Stabilization of Calibration Metrological Characteristics of Technological Inspection Tools
    147 Marchenko A., Sesekin A.
    Optimization Planning of Low-Rise Residential Buildings
    148 Panfilov A.E., Krushel E.G., Stepanchenko O.V.
    The Simulation of the Passengers Flow at the Municipal Transport Stops and the Passengers’ Transitions between the Stops
    149 Mitelman Y., Malov E.
    Mathematical Model for Analysis of Multilayered Circular Waveguides
    150 Glazyrina O.V., Pavlova M.F.
    Construction of Finite Element Method for a Solution of Nonlinear Non-Stationary Problems in Non-Convex Domains
    151 Izmailova E.V., Politova T.O., Serov V.V.
    Development of Methods of Detection of Pipelines Corrosion Defeat by Computer Modeling
    152 Milovzorov D., Yasoveyev V.
    Mathematical Modeling of the Determining Azimuth Process for Inclinometric Systems for Small Incline Angles
    153 Сурков И.В., Буртовая А.И., Миронова Н.Е.
    Разработка концепции конструкторско-метрологической модели детали для автоматизации координатных измерений
    154 Egunov V., Andreev A.
    Implementation of QR and LQ Decompositions on Shared Memory Parallel Computing Systems
    155 Katsupeev A.A., Shcherbakova E.A, Vorobyev S.P.
    Comparison of Evolutionary Algorithms used to Solve the Optimization Problem of Information Security of Distributed Systems
    156 Fomenkov S.A., Ahmed Vesam Mohammed Abdo, Bykov D.V.
    The Results of the Modified MVA Application
    157 Filippov D.M., Kozik G.P., Fursenko A.V., Fedorovsky V.N.
    The Secondary Sources Method Analysis and Experimantal Modeling of the Permanent Magnet Eddy Currents Suspansion
    158 Yakovlev A.A., Sorokin V.S., Mishustina S.N.
    Cooling Systems with Gaseous and Liquid Working Body Searching Design
    159 Grechikhin V.V., Lankin A.M., Lankin M.V.
    Definition of Weber-Ampere Characteristics of Electrical Devices Harmonic Balance Method in Solving Inverse Problems of Diagnostics
    160 Tkachenko G.I., Lankin A.M., Lankin M.V.
    Application of Series-Parallel Resonant Impedance in Technology and Medicine
    161 Stepanchenko I.V., Krushel E.G., Privalov O.O.
    On the Pollutants Sources Parameters Identification Problem under the Conditions of the Pollutants Dissipation Zone Incomplete Information Portrait
    162 Moskvicheva P.O.
    The Instability of the Solutions оf the Generalized Sobolev type Equation on a Graph
    163 Shiryaev V., Tsybulevsky A.
    Homogeneous Algorithm for Global Optimization with Adaptive Model of Objective Function
    164 Tavaeva A.F., Petunin A.A.
    The Cutter Speed Determination of CNC Laser Cutting Machines for Precise Calculation of Objective Function of Tool Path Problem
    165 Kocherzhinskaya Yu.V., Ilina E.A., Velikanov V.S.
    Perspectives Research of Processes at Blast Furnace Slag Formation with Method of Molecular Dynamics Using Computer Simulations
    166 Popov E., Fomenkov S.
    Classification of Hand Motions in EEG Signals using Recurrent Neural Networks
    167 Tkachev A., Shkuropadsky I., Burtseva О.
    Application of Combined Finite and Complex Value Boundary Elements Method for Magnetic Field Calculation of Electromecanical Systems
    168 Glazyrina L.L., Pavlova M.F.
    Construction and Investigation of Finite Element Method for Nonlinear Non-Stationary Problems with a Nonlinear Condition on the Section in a Domain
    169 Haritonova L.P.
    About Mathematical Modeling of Aerodynamic Characteristics in Devices with a Leakage of the Impact Systems of Plane-parallel Streams on the Heat Exchange Surface
    170 Militsyn A., Malykhina G.
    Application of Dynamic Neural Network to Search for Objects in Images
    171 Burtseva О.А., Tkachev А.N., Abuladze N.R.
    Methods for Research of Nonconservative Systems States
    172 Tuktamyshev V.R., Kataev Ya.A., Glukhov D.A.
    Development of Methodology of DEPP Dynamization and Production in Engineering Based on Comprehensive Approach to Implementation of CAD Systems
    173 Tushev S., Sukhovilov B. / Тушев С.А., Суховилов Б.М.
    Effective Graph-Based Point Matching Algorithms
    Эффективные алгоритмы поиска соответствий точек на снимках на основе графов
    174 Gurlev V.G., Khomyakova T.S.
    The Development and Application of Information Technology of a Complex Assessment of Economic and Energy Security of the Enterprises of Housing and Communal Services
    Section 3.7. Theory and applications of dynamical measurements
    1 Maksudov D.V., Yangirov I.F., Yushkova O.A.
    Electrovechanical Converter with Spiral Secondary Element Generalized Model
    3 Кожемякин С.Д.
    Реализация алгоритма коррекции динамической погрешности самонастраивающейся измерительной системы на базе суперкомпьютерного центра ЮУрГУ
    5 Dmitriev S.V., Dmitrieva I.S., Syutkina Ju.P.
    The Reliability of the Contact Switching of the Measuring Signal
    6 Dmitriev S.V., Syutkina Ju.P., Dmitrieva I.S.
    The Performance Matrix of the Contact Switch of the Measuring Signals
    7 Sedov A.V.
    The Principle of Diagnostic Observability of the Object on the Set of Measurements and Data Reduction based on the Decomposition Modeling Method
    8 Chernyshev V.V., Arykantsev V.V.
    Dynamic Measures of the Force of Foot Breakaway from Ground of Deepwater Walking Machines
    9 Zamyshlyaeva A.A., Tsyplenkova O.N., Bychkov E.V.
    Optimal Control of Solutions to the Showalter – Sidorov Problem for the Sobolev Type Equation of Higher Order
    10 Ignatkov K.A., Noskov V.Ya.
    Experimental Research of Railway Carriage Location Methods at Classification Yards
    11 Shestakov A.L., Keller A.V., Sviridyuk G.A.
    Observations and Measurements in the Theory of Optimal Measurements
    12 Sagadeeva M.
    On Nonstationary Optimal Measurement Problem for the Measuring Transducer Model
    13 Manakova N.A., Bogatyreva E.A.
    Mathematical Model of the Start Control of Electric Field Potential in Conducting Medium without Dispersion Considering Relaxation
    14 Синицин В.В.
    Беспроводной датчик ускорений вращающихся валов для мониторинга состояния механизмов
    15 Zagrebina S.A., Konkina A.S.
    Traffic Management Model
    16 Grecheneva A.V., Kuzichkin O.R., Dorofeev N.V.
    Compensation of the Accelerometer Errors in Solving the Problem of Kinematic Control of Dynamic Objects
    17 Zakirova G.A.
    An Approximate Solution of Inverse Spectral Problem for Perturbed Self-Adjoint Operator
    18 Dorofeev N.V., Kuzichkin O.R.
    The Dynamic Management of the Parameters of the Probing Signals at the Geodynamic Monitoring of the Karst Processes
    19 Кацай Д.А.
    Стенд для исследования процессов резания свободно вращающимися резцами
    20 Yaparova N.
    Method for Temperature Measuring in the Rod with Heat Source under Uncertain Initial Temperature
    21 Franco Pavese
    Some important features of the proposed new definition of the International System of Units (SI) that scientists and users should know
    22 Radev H., Vassilev V., Bogev V., Voloshyn A.
    About the Metrology Assurance of Manufacturing of Large-Size Rotating Parts
    23 Serov A.
    Influence of ADC Nonlinearly on the Measurement Error of the Active Power to Code Converter
    24 Shestakov A.L., Ibryaeva O.L., Iosifov D.Yu.
    Optimal Transfer Function of Correction Device to Input Signal Restoration Using State Vector of Primary Measuring Transducer
    25Kadchenko S.I., Kadchenko A.I., Zakirova G.A.
    The Numerical Method of Solving of Inverse Spectral Problems Generated by Perturbed Self-Adjoint Operator
    Part 5. Industrial and civil construction
    Section 5.1. Building materials and products
    1K.V. Schuldyakov, L.Ya. Kramar, B.Ya. Trofimov / Шулдяков К.В., Крамар Л.Я., Трофимов Б.Я.
    The Properties of Slag Cement and Its Influence on the Structure of the Hardened Cement Paste
    Свойства цемента с добавками шлака и его влияние на структуру цементного камня
    3V.A. Abyzov
    Lightweight Refractory Concrete Based on Aluminum-Magnesium-Phosphate Binder
    4V. Belyakov , L. Bannikova
    Study of the Effect of Recent Chemical Admixtures on the Modified Polysterene Concrete Properties
    5V.D. Kotlyar, K.A. Lapunova, G.A. Kozlov / Котляр В.Д., Лапунова К.А., Козлов Г.А.
    Wall Ceramics Products Based on Opoka and Coal Slurry
    Стеновые керамические изделия на основе опок и угольных шламов
    6M.D. Butakova, S.P. Gorbunov
    Study of the Influence of Complex Additives on properties of the Gypsum-cement-puzzolan Binder and Concretes on Its Basis
    7T.K. Akchurin, A.V. Tukhareli, T.F. Cherednichenko
    Effective concrete modified by complex additive based on waste products of construction acrylic paints
    8V.A. Perfilov, D.V. Oreshkin, D.Yu. Zemlyanushnov
    Concrete Strength and Crack Resistance Control
    9V.A. Perfilov, D.V. Oreshkin,V.S. Semenov
    Environmentally Safe Mortar and Grouting Solutions with Hollow Glass Microspheres
    10T.K. Akchurin, V.D. Tukhareli , О.Yu. Pushkarskaya
    The Modifying Additive for Concrete Compositions Based on the Oil Refinery Waste
    11S.N. Pogorelov, G.S.Semenyak
    Frost Resistance of the Steel Fiber Reinforced Concrete Containing Active Mineral Additives
    12A.Yu. Stolboushkin, A.I. Ivanov, O.A. Fomina
    Use of Coal-Mining and Processing Wastes in Production of Bricks and Fuel for Their Burning
    13Y.M. Kosichenko, O.A. Baev
    Design of Impervious Coatings with Enhanced Reliability Made from Innovative Materials
    14D.V. Ulrikh, M.D. Butakova
    Soil-cement of Normal Hardening on the Basis of the Argillaceous Raw Material and Copper Ore Processing of Waste in Eco-geology and Construction
    16Y. Ivaschenko, E. Shoshin, D. Timokhin
    Nanophase Formation of Portland Cement in the Presence of Disaccharides
    17L.V. Il’ina, I.N. Mukhina
    Estimation of the Applicability for the Filler Produced by Recycling of Concrete and Reinforced Concrete Used in Heavy Concrete
    18M.O. Tuzhikov, I.V. Tertishnikov, D.V. Azarov
    Study of Urban Atmosphere Harmful Substances Adsorption into Cement
    19V. Rudnov, V. Belyakov, S. Moskovsky
    Properties and Design Characteristics of the Fiber Concrete
    20R.R. Khasanshin, R.R. Safin, E.Y. Razumov
    High Temperature Treatment of Birch Plywood in the Sparse Environment for the Creation of a Waterproof Construction Veneer
    21Yu.E. Tokach , E.N. Goncharova
    Creating Bioresistant Technogenic Waste Basted Coatings for Construction Materials
    22E. Gerasimova
    The Effect of Fe2O3 on the Mechanical Properties of the Polymer Modified Cement Containing Fly Ash
    23A.Hadbaatar, N.A. Mashkin, N.G. Stenina
    Study of Ash-Slag Wastes of Electric Power Plants of Mongolia Applied to their Utilization in Road Construction
    24B.V. Krutasov, V.S. Molchanov , I.B. Krutasova
    Silicon-Organic Modifying Additives for Protection of Wooden Architecture Monuments of Siberia
    25N. Ivanchik, V. Kondratiev, A. Chesnokova
    Use of Nanosilica Recovered from the Finely Dispersed By-product of the Electrothermal Silicon Production for Concrete Modification
    26S.I. Evdokimov , M.P. Maslakov, V.S. Evdokimov
    Construction Materials Based on Wastes from Mining and Metallurgical Industries
    27S. Maksimov, Ju. Bashkova
    Development of Methods to Enhance the Strength Characteristics for the Fibre-Reinforced Plastic Rebar
    28L.M. Vesova
    Disperse Reinforcing Role in Producing Non-autoclaved Cellular Foam Concrete
    29N.G. Chumachenko, S.A. Dergunov, S.A. Orekhov
    Energy Efficient Compositions of Dry Concrete Mixes Based on Gypsum-Bearing Systems
    30M. Korovkin , N. Eroshkina
    Influence of a Superplasticizer on Cement Grinding and Its Activity Reduction During Storage
    31N. Eroshkina , M. Korovkin
    The Effect of the Mixture Composition and Curing Conditions on the Properties of the Geopolymer Binder Based on Dust Crushing of the Granite
    32S.V. Sverguzova, Zh.A. Sapronova, I.V. Starostina
    Disposal of Synthetic Surfactants-Containing Wastewater Treatment Sludge in the Ceramic Brick Production
    33B.A. Bondarev, P.V. Borkov, A.B. Bondarev
    An Outlook on the Application of Glass-Reinforced Plastic and Polymer Concrete Components in Bridge Construction
    34А.А. Orlov, Т.N. Chernykh
    Research of Water Resistance and Heat Resistance of Magnesium Phosphate Cements
    36V.I.Loganina , S.N.Kislitsyna, M.V. Frolov
    Addition on the Basis of Mix of the Synthesized Hydrosilicates of Calcium and Aluminosilikates for Dry Building Mixtures
    37V.I. Kalashnikov, E.A. Belyakova, R.N. Moskvin
    Selecting the Type of the Control Setting Composite Cement-Ash Binder
    Section 5.2. Construction, buildings and structures
    1V.M. Astashkin, M.V. Mishnev
    On The Development of the Manufacturing Technology of Fiberglass Cylindrical Shells of Gas Exhaust Trunks by Buildup Winding
    2V. Salnikov, V. Belyakov, V. Veselov
    Problems of Residential Building Ensuring Safe Operation with Wall Panels Made of the Autoclaved Aerated Concrete
    3V. Korobko, A. Korobko, A. Chernyaev
    Isoperimetric Properties of the Torsion Rigidity of Convex Sections
    5Л.В. Кукса, Е.Е. Евдокимов
    Исследование концентрации напряжений в элементах конструкций из изотропных, анизотропных и поликристаллических материалов
    6Е.С. Румянцев, В.М. Захаров, Н.Н. Смирнов
    Разработка и анализ эффективности использования теплоотражающих экранов с солнечными панелями в окнах для условий России и Франции
    7V.V. Tyutikov, N.N. Smirnov, D.A. Lapateev
    Analysis of Energy Efficiency from the Use of Heat-Reflective Window Screens in Different Regions of Russia and France
    8V.A. Kamaev, I.P. Mikhnev, N.A. Salnikova
    Natural Radionuclides as a Source of Background Irradiation Affecting People Inside Buildings
    9A. Tusnin
    Finite Element for Calculation of Structures Made of Thin-walled Open Profile Rods
    10A.S. Chepurnenko, B.M. Yazyev, A.A. Savchenko
    Calculation for the circular plate on creep considering geometric nonlinearity
    11S.V. Litvinov, L.I. Trush, S.B. Yazyev
    Flat Axisymmetrical Problem of Thermal Creepage for Thick-Walled Cylinder Made Of Recyclable PVC
    12A.S. Chepurnenko, A.V. Saibel, B.M. Yazyev
    Determination of the Breaking Load for Concrete Slabs Based on the Deformation Theory of Plasticity
    13V. Astashkin, S. Shmatkov, A. Shmatkov
    Polymer Composite Rational Application Field in the Gas-escape Channel Construction of Industrial Chimneys and Ventilation Pipes
    14Н.А. Бузало, С.А. Алексеев, Н.А. Царитова
    Численный анализ несущей способности узла пространственной стержневой конструкции с учетом геометрической и физической нелинейности
    16A.L. Krishan, E.A. Troshkina, E.P. Chernyshova
    Efficient Design of Concrete Filled Steel Tube Columns
    17G.M. Skibin, M.N.Shutova, A.I. Subbotin
    Approaches for Development of a Universal Method for Calculating the Residual Life of Buildings and Structures
    19V.A. Pshenichkina, G.V. Voronkova, S.S. Rekunov
    Research of the Dynamical System “Beam – Stochastic Base”
    20S.V. Aleksiko
    Analysis of Design Parameters of Highway Subgrade Soils in Southern Russia
    21Э.В. Ретлинг, Т.М. Багаутдинова, О.В. Савина
    Об уровнях шума, проникающего из цеха в посты управления в промышленных зданиях
    22Э.В.Ретлинг, Т.М. Багаутдинова, О.В. Савина
    О расчете изоляции ударного шума изотропной прямоугольной плитой
    23Э.В. Ретлинг, Т.М. Багаутдинова, О.В. Савина
    Определение частотной характеристики прямоугольной пластины при помощи развернутой косинусоиды
    24P. Podnebesov, V. Teryanik
    Compressed Column Strengthening by Holder Constructions with the Use of a Self-Consolidating Fiber Concrete
    25M.N. Serazutdinov, M.N. Ubaydulloyev
    Method of Calculation of Strengthening of the Loaded Rod Structures Taking into Account Plastic Deformations
    27N.A. Buzalo, S.A. Alekseev, N.G. Tsaritova
    Numerical Analysis of Spatial Structural Node Bearing Capacity in the View of the Geometrical and Physical Nonlinearity
    28A. V. Ignatyev, V. A. Ignatyev, E. V. Onischenko
    Analysis of Systems with Unilateral Constraints through the Finite Element Method in the Form of a Classical Mixed Method
    29A.V. Ignatyev, V.A. Ignatyev
    On the Efficiency of the Finite Element Method in the Form of the Classical Mixed Method
    30A.V. Ignatyev, V.A. Ignatyev
    Modified Algorithm for the Analysis of Thin Plates by the Finite Element Method in the Form of the Classical Mixed Method
    31I.A. Ivashenko
    Optimization of the Prestress Value in Binding of Reinforced Concrete Structures
    32R.G. Gubaidulin, А.К. Tingaev
    Study of the Reasons of Emergency Shutdown of Multiple Hearth Furnace for Production of the Magnesia Binding Material
    33A.K. Tingaev, R.G. Gubaydulin, I.A. Ilin
    Study of the Effect of Thermal Cutting on the Microstructure and Chemical Composition of the Edges of Workpieces Made of Steel Brands S345, S390
    34E.V. Uglova, A.N. Tiraturyan
    Interlayer Bond Evaluation in the Flexible Pavement Structures Using a Nondestructive Testing Method
    35Т.А. Krakhmal'ny, S.I. Evtushenko, M.P. Krakhmal'naya
    Improvement of a Method of Calculation of a Residual Resource of Small Reinforced Concrete Bridge Constructions
    37D.V. Kasharin
    Optimizing the Parameters of Water-Retaining Protective Structures under Small Stream Conditions
    39T.P. Kasharina
    Results of the Study on the Influence of Shell Structures on Their Stability
    40A. Ermakova
    Additional Finite Elements and Additional Loads for Analysis of Systems with Several Nonlinear Properties
    41N.G. Bandurin, S.Yu. Kalashnikov
    Accurate Solution of Problem of the Stress-strain State of a Multi-span Compressed-bent Elastic Bar in the Linear Statement
    42G.B. Verzhbovskiy
    Method of Composite Materials Characteristics Forecasting
    43V.A. Subbotin, I.A. Subbotin
    Reasons for Exterior Effective Brick Walls Deterioration as Exemplified with Buildings under Construction
    44V.V. Drozdov, V.A. Pshenichkina, K.N. Sukhina
    Evaluation of Reliability of the Earthquake Resistant Building Provided by means of the Analysis for Design-Basis Earthquake
    46V.A. Musikhin
    Determination of a Real Strain-stress State of the Steel-wire Rope Elements
    47V.F. Saburov, V.V. Ankudinov
    Joint Functioning of Crane Rails and Industrial Buildings Crane Girders under Local Crane Loads
    48V.L. Bondarenko, E.A. Semenova
    Principles of Ecological and Economical Justification of Construction and Operating Waterwork Units
    49A. Lyapin, Y. Shatilov
    Vibration-Based Damage Detection of the Reinforced Concrete Column
    50A.A. Karamisheva, S.B. Yazyev, A.A. Avakov
    Calculation of Plane Bending Stability of Beams with Variable Stiffness
    52A.L. Krishan, E.P. Chernyshova, R.R. Sabirov
    Calculating the Strength of Concrete Filled Steel Tube Columns of Solid and Ring Cross-Section
    53V. Solomin
    Strain-Stress State and Strength of Chimney Reinforced Concrete Shell
    54E. Ufimtsev, M. Voronina
    Research of Total Mechanical Energy of Steel Roof Truss during Structurally Nonlinear Oscillations
    55A. Potapov
    Time Analysis of Dissipative Systems Elastic Response. Part 1
    56A. Potapov
    Time Analysis of Dissipative Systems Elastic Response. Part 2
    57A. Nosenko, A. Domnitskiy, E. Shemshura
    Formalization of Requirements to Road Tunnels
    61D.R. Mailyan, E.V. Trufanova
    Planning of Multilayer Cylindrical Wall Reservoirs
    60V.N. Aksenov, Vu Le Quyen, E.V. Trufanova
    Evaluation of Reinforced Concrete Cylindrical Reservoirs with Single-Layered Walls
    62Vu Le Quyen, D.R. Mailyan
    Search for Rational Single Wall Construction of Reinforced Concrete Cylindrical Reservoirs
    Section 5.3. Urban construction
    1A.N. Afanasyeva, A.A. Guseinova
    Land City District Zoning Areas for the Development and Use of the Unified Management and Operation of the Housing Stock
    3B.Kh. Sanzhapov, A.A. Sinitsyn, N.M. Rashevskiy
    Justification of the Сhoice of the Site for Construction Projects on the Basis of the Atmospheric Air Monitoring
    4E.Yu. Kozlovtseva, V.F. Loboyko, D.A. Nikolenko
    Monitoring of Fine Dust Pollution of Multistory Buildings Air Environment as an Adoption Factor of Town-planning Decisions
    5S.G. Sheina, A.A. Khamavova
    Technique for the Russian Federation regional territories assessment used to create industrial parks network
    6S.A. Matovnikov, N.G. Matovnikova
    Innovative Urban Planning Methods for the Urban Landscape Design in the Volgograd Agglomeration
    7V.N. Anopin, S.A. Matovikov, N.G. Matovnikova
    The Features of the Establishment and Maintenance of Parkland in the Solution of the Problems of Urban Agglomerations in Volgograd
    8S. Shabiev
    The Ecological City Planning Aspects of the South Ural State University Main Building Complex Reconstruction
    9E.V. Martynova, S.G. Sheina
    Informational Support of Energy Saving Reconstruction of a Built-up Area
    10S.A. Chebanova , V.G. Polyakov, D.A. Erokhin
    Engineering Systems of Heat Supply and Working on Coal as Sources of Air Pollution by Finely Dispersed Dust
    11А.В. Антюфеев, О.А. Антюфеева, Г.А. Птичникова
    Градостроительные основы определения границ объектов военной истории (достопримечательное место "Территория музея-заповедника "Сталинградская битва")
    12A.V. Vorontsova, V.L. Vorontsova, D.V. Salimgareev
    The development of Urban Areas and Spaces with the Mixed Functional Use
    13V. Azarov, N. Barikaeva, T. Solovyeva
    Monitoring of Fine Particulate Air Pollution as a Factor in Urban Planning Decisions
    14V. Azarov, M. Тrokhimchyk, O. Sidelnikova
    Research of Dust Content in the Earthworks Working Area
    15O.N. Paramonova, E.P. Lysova , N.V. Yudina
    Main Principles of Urban Lands of the Air Basin Ecological Monitoring Organization from Toxic Components of Residue and Exhaust Gases of Stationary Sources by the Example of the City of Rostov-on-Don
    16V.I. Bespalov, O.S. Gurova, N.S Samarskaya
    Main Principles of the Atmospheric Air Ecological Monitoring Organization for Urban Environment Mobile Pollution Sources
    17A.M. Kostin, S.A. Belov , I.V. Malev
    Peculiar Features of Influence of the Modern Ecological State of the City of Chelyabinsk on Economic and Architectural Indexes of the Territory
    18L.I. Khorzova, P.A. Sidyakin, E.G. Yanukyan
    Radiation Situation at Construction Sector Objects in Caucasus Mineral Waters Region and Prospects of its Decrease
    19A. Bogomolov, N. Sergina, T. Kondratenko
    On Inertial Systems, Dust Cleaning and Dust Removal Equipment, and Work Areas in the Production of Aerated Concrete from the Hopper Suction Apparatus CSF
    20В.В. Серебряная
    Проблемы преобразования архитектурно-градостроительной среды малых исторических городов: на примере Волгоградской области
    22O.A Rastyapina, N.V Korosteleva
    Urban Safety Development Methods
    23V.V. Balakin, V.F. Sidorenko
    Wind Transformation around Residential Buildingsin Street Canyons
    24A. Leyzerova, E. Sharovarova, V. Alekhin
    Sustainable Strategies of Urban Planning
    25E. Serova, K. Somova
    The Decision of Tasks of Estimation of the State Automotive-Road Service System
    26A.V. Bobylev, M.N. Bubin, N.S. Rasskazova
    The Geoecological Modelling of Small Water Reservoirs and River Catchment Areas as a Procedure in Urban Development
    27A.V. Azarov, N.S. Zhukova, V.F. Sidorenko
    Improving the Computational Model for Approximation of Particle Functions over Diameter of Dust in the Work Area and at the Border of the Sanitary Protection Zone
    28A.V. Azarov, N.S. Zhukova, E.A. Kalyuzhina
    Environmental and Working Area Dust Emission from the Gypsum Warehouse
    31А.В. Антюфеев, Т.А. Чернявская, Ю.В. Чернявский
    Территориально-кластерная политика развития градостроительных систем
    32S.A. Koshkarev, D.V. Azarov, Astali Majd
    Evaluation of the Degree of the Leak-Through of Fine Dust in a Wet Cleaning Abatement Decreasing Dust Systems of Aspiration Schemes in the Building Construction Industry
    34A.A. Kuzmichev, V.F. Loboyko
    Impact of the Polluted Air on the Appearance of Buildings and Architectural Monuments in the Area of Town Planning
    Section 5.4. Construction technology and organization
    1S.B. Koval, E.S. Isakova, E.V. Chistyakova
    Universal Method for Assessing Employer Satisfaction with the Student and Graduate Qualifications Quality
    2A.I. Romanova
    Improving the Quality of Construction Works in Terms of the Self-Regulation
    3T.А. Shindina
    Organization of Interaction between the Participants in Modern Construction
    6G.A. Pikus
    Steel Fiber Concrete Mixture Workability
    7A.V. Kiyanets
    Resource-Saving Construction Technologies
    8K.M. Mozgalev, E.Yu. Taran
    Сonfirming the Actual Energy Efficiency for Commissioned Buildings
    9S.G. Abramyan, R.Kh. Ishmametov
    Strengthening Timber Roof Trusses during Building Construction and Reconstruction
    10A.A. Antonov, M.V. Molodtsov, V.E. Molodtsova
    Framing Systems in Residential Construction
    11S.G. Аbramyan
    Environmental compliance during construction
    13V. Budnik, S. Chernyi
    Future Development of the World Ocean Mining for the Industry
    14A.Kh. Baiburin
    Technology of the Early Age Concrete Loading
    15V.A. Gurieva, T.C. Belova
    Structural Features of the Cement-sand Mortar Reinforced with a Modified Basalt Microfiber
    17O.V. Kliuchnikova, O.A. Pobegaylov
    Rationalization of Strategic Management Principles as a Tool to Improve a Construction Company Services
    18O.A.Pobegaylov, G.I.Myasishchev, O.E.Gaybarian
    Organization and Management Efficiency Assessment in the Aspect of Linguistic Communication and Professional Text
    19Hamid Eskandari, Alireza Mozafari Nic, Anis Ghanei
    Effect of Air Entraining Admixture on Corrosion of Reinforced Concrete
    20Hamid Eskandari, Morteza Gharouni Nik, Mohammad Mahdi Eidi
    Prediction of Mortar Compressive Strengths for Different Cement Grades in the Vicinity of Sodium Chloride Using ANN
    21Hamid Eskandari, Morteza Tayyebinia
    Effect of 32.5 and 42.5 Cement Grades on ANN Prediction of Fibrocement Compressive Strength
    Section 5.5. Foundations, bases and underground structures
    1V. Akopyan, A. Akopyan
    Experimental and Theoretical Investigation of the Interaction of the Reinforced Concrete Screw Piles with the Surrounding Soil
    3Y.I. Olyansky, I.Y. Kuzmenko, E.V. Shchekochikhina
    Features of Construction Buildings on the Loessial Soil of Central Moldova
    4Y.I. Olyansky, E.V. Shchekochikhina, I.Y. Kuzmenko
    The Forecast of Durability Indicators of the Sarmatian clays underneath of Engineering Structures Affected by Technogenic Floodwaters
    5S.V. Kuznetsova, S.I. Makhova
    The Problems of Foundation Making in the Maikop clays of the Lower Volga Region (by the example of Volgograd)
    6G.G. Kashevarova, O.А. Makovetskiy
    Analysis of Experimental and Estimated Jet-Grouted Soil Mass Deformations
    7O.А. Makovetskiy
    Application of “Jet Grouting” for Installation of Substructures of Estates
    8M. A. Shubin
    The Destruction of the Foundations of Structures in Coastal Areas of the Volgograd Region
    9V.P. Dyba, P.V. Dyba
    Geotextile Reinforced Slopes Bearing Capability Calculation Method and Its Experimental Testing
    10O.N. Osipova, V.P. Dyba, Yu.V. Galashev
    Depth Study of Compressible Thickness of the Base in Full-scale Experiment
    11A.I. Subbotin, M.G. Skibin
    Automated System for Experimental Study of Foundation Bases Performance
    12A. Prokopov, V. Matu,V. Akopyan
    Monitoring of the Geotechnical State of the Array During the Reconstruction of the Roki Tunnel
    13G.M. Skibin, I.N. Chizh
    Evaluation of Cutoff Walls Influence on Stresses Distribution under Adjacent Foundations
    14S.U. Novozhenin, M.G. Vystrchil
    New Method of Surface Settlement Prediction for Saint-Petersburg Metro Escalator Tunnels Excavated by EPB TBM
    15A.B. Ponomaryov, A.V. Zakharov
    Numerical Simulation of the Process of the Geothermal Low-potential Ground Energy Extraction in the Perm Region (Russia)
    16M.A. Bauer, V.A. Dmitrienko, A.I. Kapustin / Бауэр М.А., Дмитриенко В.А., Капустин А.И.
    Assessment of Deformations of Earth`s Surface at Mine Construction on Sub-Soils
    Оценка деформаций поверхности Земли при строительстве горных выработок в грунтах
    17E.N. Karpushko, I.L. Bartolomei, M.O. Karpushko
    Study of Using the Possibility of Textile Sand Piles at the Base of the Automobile Road Folded by Saline Soils
    18G.G. Badalyan, V.A. Dmitrienko, A.A. Skomorokhov / Бадалян Г.Г., Дмитриенко В.А., Скоморохов А.А.
    Resource-saving Technology of Building of Vertical Mine Working in Soil
    Ресурсосберегающая технология строительства вертикальных горных выработок в грунтах
    19Г.М. Скибин, И.Н. Чиж
    Оценка влияния шпунтового ограждения на распределение напряжений под соседними фундаментами
    20L.K. Petrenko, S.E. Manzhilevskaya, D.O. Bogomazyuk
    Mathematical Simulation of SiO2 Leaching from Silicified Soils: Innovative Approach
    21В.П. Дыба, П.В. Дыба
    Метод расчета несущей способности укрепленных геотекстилем откосов и его экспериментальная проверка
    22T.P. Kasharina
    Calculated Justification of Reinforced Soil Structures in the Design and Construction of Transport Systems
    Section 5.6. Engineering networks and equipment
    1E.V. Nikolaenko, M.Yu. Belkanova
    Influence of the Treatment Method on the Water Yielding Capacity of Natural Water Sediments
    3S.O. Gaponenko , A.E. Kondratiev, A.R. Zagretdinov
    Low-frequency Vibro-acoustic Method of Determination of the Location of the Hidden Canals and Pipelines
    4Sh.G. Ziganshin, Yu.V. Vankov, T.G. Gorbunova
    Reliability of Thermal Networks for City Development
    5A.R. Zagretdinov , Yu.V. Vankov, I.V. Ivshin
    The Analysis of Frequencies of Own Insulators Fluctuations for the Solution of a Problem of their Control
    6A.A. Tsynaeva, M.N. Nikitin
    Study of the Flow in a Channel with Dumbbell-Shaped Dimples
    7L.G. Starkova, E.R. Farkhutdinova
    Increase of the Efficiency of the System of Cooling of Data Processing Center Servers
    8I.A. Arkanova, K.A. Kuznetsova
    Characteristic Features of the Water-Treatment System Design for Outdoor Pools in the Urals
    9E.D. Khetsuriani, V.P. Kostyukov, E.G. Ugrovatova
    Hydrological Studies on the River Don around the Alexandrovsky OSV Water-Intake Facilities
    10S.E. Denisov , M.V. Shirokova
    Analysis of the Effectiveness of Sorption and Membrane Technologies and Water Purification Equipment with Increased ?-Activity for Domestic Water Supply
    11Т.А. Krakhmal'ny, S.I. Evtushenko, M.P. Krakhmal'naya
    New System of Monitoring of a Condition of Cracks of Small Reinforced Concrete Bridge Constructions
    12E.V. Moskvicheva, V.P. Batmanov, A.A. Sakharova
    Improvement of the Purification Technology of Natural Waters in Waterworks in the Steppes and the Desert Zone
    13E.V. Moskvicheva, P.A. Sidyakin, D.V. Shitov
    Method of Corrosion Prevention in Steel Pressure Pipelines in Sewerage Systems
    16S. Denisov, E. Gordeef, S. Maksimov
    Vibrationally Intensified Sewage Sludge Dehydration
    17I.A. Stetsenko , D.N. Shurygin, I.S. Grushko
    Full-Scale-Model Tests of Reinforced Structural Elements
    18S. Denisov, S. Maksimov, E. Gordeef
    Improving the Efficiency of Biological Treatment of Domestic Wastewater by Using Acoustic and Hydrodynamic Effect
    19V.I. Aksenov, N.S. Tsarev, K.V. Yasnitskaya
    Treatment of the Combined Sludges of Machine Factories