industrial engineering
england flag English e-mail icie.rus@gmail.com

ДОКЛАДЫ, ПРИНЯТЫЕ НА КОНФЕРЕНЦИЮ
Раздел 2. Материаловедение и технологии промышленного производства /
Materials Engineering and Technologies for Production and Processing
Секция 2.1. Полимеры, композиты и керамика / Polymers, Composites and Ceramics

    Фамилии авторов, название доклада / Authors Name/s, papers Title
    2.1.1Valentina I. Loganina, Yerkebulan B. Mazhitov, Yuri P. Skachkov
    Assessment of Fire Safety of Coatings Based on Silicate Paint Sol
    2.1.2I.S. Pyshkina, K.V. Zhegera
    The Economic Efficiency of the Development of Dry Mixes with the Supplement Based on Calcium Hydrosilicates
    2.1.3Чэнь Янян, Г.В. Малышева
    Оптимизация технологии режима отверждения композитов на основе эпоксидных связующих
    2.1.4Valery Dyadichev, Andrey Kolesnikov, Aleksandr Dyadichev
    Determination of Rational Technological Parameters of Co-extrusion Processing of Secondary Polymeric Materials by the Method of Physical Modeling
    2.1.5E.S. Gerasimova, N.Yu.Kamalova
    Quartzitic Waste, as the Possible Component of the Cement Flooring Composite Material
    2.1.6В.А. Нелюб 
    Многокритериальная оптимизация технологии нанесения металлических покрытий на углеродные ленты
    2.1.7O.A. Fomina, A.Yu. Stoboushkin
    Modeling of the Transition Layer in Ceramic Matrix Composites from Coal Wastes and Clay
    2.1.9Victoria A. Gurieva, Anastasia A. Ilyina
    Prospects for the Development of Building Ceramics, Based on Stale Slags from the Non-Ferrous Metallurgy of Orenburg
    2.1.10L.B. Aksenov, I.Y. Kononov 
    Thin Sheet Forming with 3D Printed Plastic Tool
    2.1.11Zh.A. Sapronova, S.V. Sverguzova, A.V. Svyatchenko
    About the Possibility of Recycling Water Treatment Sludge in the Wood–Cement Composites Production
    2.1.13A.O. Tolkushkin, S.N. Lezhnev, A.B. Naizabekov
    Computer Simulation and Study of the New Forging Technology of Billets in a Step-Wedge Dies
    2.1.14Yu. A. Bozhko, K.A. Lapunova, L.V. Postoi
    Face Ceramic Brick of soft Molding based on Opoka-like raw Materials
    2.1.15Gulnara I. Amerkhanova, Aleksey I. Khatsrinov, Lyubov A. Zenitova 
    Composite Materials Based on Plasma Treated Basalt Fibers for Heavy-Duty Concrete Products
    2.1.16Anton A. Valeev, Elena V. Morozova
    Simple Universal Kelvin Equation Valid in Critical Point Vicinity, External-Internal State Correction, and their Application in Understanding of Oxygen Capillary Evaporation and Condensation in Mesoporous Silica MCM-41
    2.1.17Boris A. Semenikhin, Lyubov P. Kuznetsova, Vladimir I. Kozlikin
    The Use of Hard Alloy Waste in Composite Galvanic Coatings for the Restoration of Car Parts
    2.1.18Alsu A. Yusupova, Aleksey I. Khatsrinov, Lenar N. Shafigullin
    Activating Effect of Aluminum Chloride in the Technology of Poly-sulfides and Materials Based on Them
    2.1.19Смолий В. А., Косарев А. С
    Физико-химические свойства энергосберегающих трехслойных панелей для энергоэффективных жилых и общественных объектов крупнопанельного и каркасно-панельного домостроения
    2.1.21F.L.Kapustin, A.F.Kapustin
    Compositions and Properties of Polymeric Concrete with Granulight Additive
    2.1.22N.P. Shabelskay, V.V. Semchenko, A.S. Deeva
    Activity of Zinc Oxide Based Spinels Catalytic
    2.1.23Margarita A. Goncharova, Vladimir V. Krokhotin, Alexander N. Ivashkin
    The Influence of Fiber Reinforcement on the Properties of the Self-Compacting Concrete Mix and Concrete
    2.1.25Olga A. Belyak, Tatiana V. Suvorova
    Modeling the Effect of Porosity Oil-Bearing Composite at Tribological Contact
    2.1.26V.I. Kuzmin, V.I. Lysak, E.V. Kuzmin 
    A Study of the Influence of Thickness of Anti-Diffusion Layer on the Structure and Thermal Resistance of Composite А5-Cr-St3
    2.1.27Vasily Ovchinnikov, Elena Mastalygina, Petr Pantyukhov
    Investigation of Novel Polymer Composites Based on Recycled Multilayer Combined Packaging Materials
    2.1.28Mikhail V. Astahov, Irina I. Sorokina, Ekaterina V. Slavkina
    To the Question of an Experimental Assessment of the Fatigue Characteristics of a Transversal Metal-composite Compound
    2.1.29V.D. Tukhareli, E.E. Gnedash, A.V. Tukhareli 
    Heat-Resistant Composite Materials Based on Secondary Material Resources
    2.1.30Tatiana Lonzinger, Vadim Skotnikov and Alexey Sukharev
    Study of the Influence of Refractories Structure on the Thermomechanical Properties of Tunnel Kiln Equipment Lining
    2.1.31Valentina A. Poluektova
    Fine-Grained Polymer-Cement Basalt Fibrous Concrete for 3D Printing
    2.1.32А.С. Лебедев, В.Е. Еремяшев, А.В. Суздальцев 
    Упрочнение легких металлов и сплавов ультрадисперным карбидом кремния
    2.1.33Margarita A. Goncharova, Konstantin A. Korneev, German S. Dedyaev
    Improving Construction Engineering Properties of Soils Stabilized by a Cement Binder with Techno-Genic Products
    2.1.34Elina R. Salmanova, Alexey M. Nazarov, Iren O. Tuktarova
    Receiving Composite Sorbents for Sewage Treatment on the Basis of Waste of Production and Processing of Micaceous Quartzite
    2.1.35Valeria Strokova, Mariana Sivalneva and Vadim Kobzev
    The Effect of Polyvinyl Alcohol on the System of Cement-Free Binding Alumino-Silicate Composition
    2.1.36E.A. Yatsenko, V.A. Smoliy, A.A. Chumakov
    Physical-Chemical Studies and Evaluation of the Suitability of Chernoyarskoe Deposit’s Diatomite for the Synthesis of Foam Glass
    2.1.37F.L. Kapustin, A.F. Kapustin
    Influence of Plasticizers on the Properties of Fine-grained Polymer Concrete
    2.1.38Boris M. Goltsman, Lyubov A. Yatsenko and Natalia S. Goltsman
    Production of Foam Glass Materials from Silicate Raw Materials by Hydrate Mechanism
    2.1.39O.V. Zaitseva, V.E. Zhivulin and A.S. Chernukha
    Preparation of Poly-substituted Crystals with M-type Hexa-ferrite Structure Using Melts of the BaO–PbO–SrO–CaO–ZnO–Fe2O3–Mn2O3–Al2O3 System
    2.1.40V.A. Beregovoi, A.M. Beregovoi, E.V. Snadin
    Improvement of Strength Parameters of Foam Ceramics for Energy-Efficient Enclosing Structures
    2.1.42S.V. Sverguzova, Zh.A. Sapronova, R.R. Valiev
    The Use of Water Treatment Petroleum Sludge in the Manufacture of Ceramic Products
    2.1.43Lilia V. Ilina, Lubov V. Zavadskaya, Anastasia I. Ilina 
    Investigation of Composition and Technological Parameters of Highly Porous Gypsum Products Obtaining
    2.1.44Pavel V. Matyukhin
    Reaction of Spot Radioactive Source with the Energy of 661.7 KeV on The Modification in the Structure of Surface Layer of Metal Composite Material
    2.1.45A.V. Svyatchenko, N.Yu. Kiryushina, O.N. Sharapov
    Techno-genic Fillers in the Composition of Modern Polymer Paints
    2.1.46N.Yu. Kiryushina, A.Yu. Semeykin
    Properties of Epoxy-Diane Composites Modified by Techno-genic Fillers
    2.1.48K.V. Tikhomirova, A.Yu. Semeykin
    Regulation of Electrical, Thermal and Physical Properties of Composites Based on Carbon-Modified Portland Cement Materials
    2.1.49Кузнецов В.А., Кот А.В., Сапрыкин О.А.
    Экспериментальные исследования над моделями аналога лунного реголита
    2.1.50A.I. Pogoreltsev, V.L. Matukhin, J.D. Plotnikova
    Analysis of Electron Density Distribution in the CuAlO2 System
    2.1.52Alena Ivashchenko, Andrei Kireev and Anna Voznesenskaya
    Synthesis of Ultra-Dispersed Spherical Composite Materials
    2.1.54Vyacheslav S. Kuzevanov, Galina S. Zakozhurnikova, Sergey S. Zakozhurnikov
    Peculiarities of Heat and Mass Transfer in Porous Moistened Mediums at High Thermal Loads
    2.1.56Mikhail M. Kosukhin, Andrei M. Kosukhin, Irina V. Starostina
    Improving the Bio-resistance of Cement Concretes by Means of Fungicidal Poly-functional Modifiers
    2.1.58N.P. Lukuttsova, R.А. Efremochkin, S.N. Golovin
    Study of the Suspension Stability of Titanium Dioxide of Anatase Modification for Self-Purifying Fine Concrete
    2.1.59D.N. Gurulev, L.V. Palatkina
    Study оf the Diffusion Interaction between Titanium and Aluminum in the Composition AMg6-AD1-VT1-0 after Rolling with Different Compression
    2.1.60D.I. Tishkevich, A.I. Vorobjova and D.A. Vinnik
    Formation and Corrosion Behavior of Nickel/Alumina Nanocomposites
    2.1.61D.I. Tishkevich, A.I. Vorobjova and Trukhanov A.V.
    Thermal Stability of Nano-crystalline Nickel Electrodeposited into Porous Alumina
    2.1.62Anna V. Yastrebinskaya, Larisa Yu. Matveeva, Alyona S. Edamenko
    Improving the Fungus Resistance of Polymer Composites
    2.1.63Denis Vinnik, Evgeny Trofimov and Vladimir Zhivulin
    The Conditions and Results of Ferrite Based on Multicomponent Crystal Formation in High Entropic Oxide Systems
    2.1.64M.A. Sapozhnikova and I.A. Pavlova
    Kurgan Clays in the Production of Ceramic Materials
    2.1.66R.N. Yastrebinskii, A.A. Karnauhov
    Composition Material for Radiation Protection Based on Modified Disperse Titanium Hydride and Silicate Connecting
    2.1.67V.A. Guryeva, A.V. Doroshin, V.V. Dubineckij
    Ceramic Bricks of Semi-Dry Pressing with The Use of Fusible Loams and Non-Traditional Mineral Raw Materials
    2.1.69A.O. Makarova, L.R. Bogdanova, O.S. Zueva 
    Use of Natural Biopolymers to Create Nanocomposite Materials
    2.1.72Dmitri Pronichev, Leonid Gurevich, Oleg Slautin, Aleksey Serov
    Study of the Influence of Heat Treatment on the Structure and Properties of Aluminum-Copper Multilayer Systems
    2.1.74Marina N. Samodurova, Nikolai N. Ogarkov, and Sergei I. Platov
    Mathematical Modeling of High-Energy Pressing Process of Graphite-Plastic Composition